Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Download or read book TMS 2011 140th Annual Meeting and Exhibition Materials Fabrication Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deformation Structures and Processes within the Continental Crust written by S. Llana-Fúnez and published by Geological Society of London. This book was released on 2014-06-04 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of papers showing the current focus of studies of deformation structures and processes within the continental crust. The selected contributions use a large range of analytical techniques suited to the full range of structure sizes and fine-tuned to the physical process that controls the deformation, from the grain boundary at the micro-scale, the lithological contact at the meso-scale to the plate boundary at the global scale. The papers in the volume are grouped into three sections relating to specific lines of research within the analysis of rock deformation structures and processes, in particular in respect to the continental crust: structures within shear zones and faults; magmatic structures, and microstructures and rheology. These sections include papers describing field studies, experimental rock deformation and numerical modelling of deformation processes.

Download or read book STAR written by and published by . This book was released on 1964 with total page 1964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aluminium Alloys written by Tibor Kvackaj and published by BoD – Books on Demand. This book was released on 2011-02-04 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book enhances in detail the scope and objective of various developmental activities of the aluminium alloys. A lot of research on aluminium alloys has been performed. Currently, the research efforts are connected to the relatively new methods and processes. We hope that people new to the aluminium alloys investigation will find this book to be of assistance for the industry and university fields enabling them to keep up-to-date with the latest developments in aluminium alloys research.

Download or read book NASA Scientific and Technical Reports written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1968 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material's performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this.The deformation and processing of structural materials is divided into eight chapters, each one exploring a material's processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials.The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. - Contains research on the preformance of materials - Valuable resource for researchers in mechanical, civil and structural engineering - Comprehensive coverage to the deformation and processing of all types of structural materials

Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.

Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion of Aluminium Alloys written by T. Sheppard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the importance of extruded alloys has increased due to the decline in copper extrusion, increased use in structural applications, environmental impact and reduced energy consumption. There have also been huge technical advances. This text provides comprehensive coverage of the metallurgical, mathematical and practical features of the process.

Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Report written by and published by . This book was released on 1953 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Light Metals 2015 written by Margaret Hyland and published by John Wiley & Sons. This book was released on 2015-02-18 with total page 1303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2015 collection will include papers from the following symposia: Alumina and Bauxite Aluminum Alloys: Fabrication, Characterization and Applications Aluminum Processing Aluminum Reduction Technology Cast Shop for Aluminum Production Electrode Technology for Aluminum Production Strip Casting of Light Metals

Download or read book Annual Report written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1953 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: