Download or read book Channel Estimation in TDD and FDD Based Massive MIMO Systems written by Javad Mirzaei and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are three parts to this thesis. In the first part, we study the channel estimation problem in frequency-selective multi-user (MU) multi-cell massive multiple-input multiple-output (MIMO) systems, where, a time-domain semi-blind channel estimation technique is proposed. Compared to frequency-domain, the time-domain channel estimation requires fewer parameters be estimated. Importantly, the time-domain estimation has enough samples for an accurate channel estimate. Given this many samples in the time-domain, the proposed channel estimation technique obtains a better estimate of the channel. Here, there is no assumption on orthogonality of users' channels, knowledge of large-scale fading coefficients, and the orthogonality between the training symbols of the users in all cells. The second part of the thesis studies the channel estimation problem in correlated massive MIMO systems with a reduced number of radio-frequency (RF) chains. Leveraging the knowledge of channel correlation matrices, we propose to estimate the channel entries in its eigen-domain. Due to the limited number of RF chains, channel estimation is typically performed in multiple time slots. Using the minimum mean squared error (MMSE) criterion, the optimal precoder and combiner in each time slot are aligned to transmitter and receiver eigen-directions, respectively. Meanwhile, the optimal power allocation for each training time slots is obtained via a waterfilling-type expression. In the final part, we study the downlink channel estimation for frequency-division-duplex (FDD) massive MIMO systems. Acquiring downlink channel state information in these systems is challenging due to the large training and feedback overhead. Motivated by the partial reciprocity of uplink and downlink channels, we first estimate the frequency-independent channel parameters, i.e., the path gains, delays, angles-of-arrivals (AoAs) and angles-of-departures (AoDs), via uplink training, since these parameters are common in both uplink and downlink. Then, the frequency-specific channel parameters are estimated via downlink training using a very short training signal. To efficiently estimate the channel parameters in the uplink, the underlying distribution of the channel parameters is incorporated as a prior into our estimation algorithm. This distribution is captured using deep generative models (DGMs). The proposed channel estimation technique significantly outperforms the conventional channel estimation techniques in practical ranges of signal-to-noise ratio (SNR).

Download or read book Channel Estimation in TDD Massive MIMO Systems with Subsampled Data at BS written by Yichuan Tian and published by . This book was released on 2016 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires unaffordable pilot overhead and has high computational complexity. On the other hand, by exploiting the channel reciprocity using uplink pilots, the time division duplex (TDD) can overcome the overwhelming pilot training as well as the pilot feedback overhead. Considering these advantages, we propose a subsampling algorithm that can be implemented in a TDD mode. Particularly, we first exploit the intrinsic sparsity of CSIT, and then employ the Walsh-Hadamard Transform (WHT), which will subsample the received signal at BS, to perform channel estimation. Additionally, we discuss the proposed channel estimation scheme in a multicell scenario. Simulation results demonstrate that the proposed algorithm can accurately estimate channels with reduced computational complexity.

Download or read book Massive MIMO written by Hien Quoc Ngo and published by Linköping University Electronic Press. This book was released on 2015-01-16 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last ten years have seen a massive growth in the number of connected wireless devices. Billions of devices are connected and managed by wireless networks. At the same time, each device needs a high throughput to support applications such as voice, real-time video, movies, and games. Demands for wireless throughput and the number of wireless devices will always increase. In addition, there is a growing concern about energy consumption of wireless communication systems. Thus, future wireless systems have to satisfy three main requirements: i) having a high throughput; ii) simultaneously serving many users; and iii) having less energy consumption. Massive multiple-input multiple-output (MIMO) technology, where a base station (BS) equipped with very large number of antennas (collocated or distributed) serves many users in the same time-frequency resource, can meet the above requirements, and hence, it is a promising candidate technology for next generations of wireless systems. With massive antenna arrays at the BS, for most propagation environments, the channels become favorable, i.e., the channel vectors between the users and the BS are (nearly) pairwisely orthogonal, and hence, linear processing is nearly optimal. A huge throughput and energy efficiency can be achieved due to the multiplexing gain and the array gain. In particular, with a simple power control scheme, Massive MIMO can offer uniformly good service for all users. In this dissertation, we focus on the performance of Massive MIMO. The dissertation consists of two main parts: fundamentals and system designs of Massive MIMO. In the first part, we focus on fundamental limits of the system performance under practical constraints such as low complexity processing, limited length of each coherence interval, intercell interference, and finite-dimensional channels. We first study the potential for power savings of the Massive MIMO uplink with maximum-ratio combining (MRC), zero-forcing, and minimum mean-square error receivers, under perfect and imperfect channels. The energy and spectral efficiency tradeoff is investigated. Secondly, we consider a physical channel model where the angular domain is divided into a finite number of distinct directions. A lower bound on the capacity is derived, and the effect of pilot contamination in this finite-dimensional channel model is analyzed. Finally, some aspects of favorable propagation in Massive MIMO under Rayleigh fading and line-of-sight (LoS) channels are investigated. We show that both Rayleigh fading and LoS environments offer favorable propagation. In the second part, based on the fundamental analysis in the first part, we propose some system designs for Massive MIMO. The acquisition of channel state information (CSI) is very importantin Massive MIMO. Typically, the channels are estimated at the BS through uplink training. Owing to the limited length of the coherence interval, the system performance is limited by pilot contamination. To reduce the pilot contamination effect, we propose an eigenvalue-decomposition-based scheme to estimate the channel directly from the received data. The proposed scheme results in better performance compared with the conventional training schemes due to the reduced pilot contamination. Another important issue of CSI acquisition in Massive MIMO is how to acquire CSI at the users. To address this issue, we propose two channel estimation schemes at the users: i) a downlink "beamforming training" scheme, and ii) a method for blind estimation of the effective downlink channel gains. In both schemes, the channel estimation overhead is independent of the number of BS antennas. We also derive the optimal pilot and data powers as well as the training duration allocation to maximize the sum spectral efficiency of the Massive MIMO uplink with MRC receivers, for a given total energy budget spent in a coherence interval. Finally, applications of Massive MIMO in relay channels are proposed and analyzed. Specifically, we consider multipair relaying systems where many sources simultaneously communicate with many destinations in the same time-frequency resource with the help of a massive MIMO relay. A massive MIMO relay is equipped with many collocated or distributed antennas. We consider different duplexing modes (full-duplex and half-duplex) and different relaying protocols (amplify-and-forward, decode-and-forward, two-way relaying, and one-way relaying) at the relay. The potential benefits of massive MIMO technology in these relaying systems are explored in terms of spectral efficiency and power efficiency.

Download or read book Channel Estimation Overhead Reduction for Downlink FDD Massive MIMO Systems written by Abderrahmane Mayouche and published by . This book was released on 2016 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Massive multiple-input multiple-output (MIMO) is the concept of deploying a very large number of antennas at the base stations (BS) of cellular networks. Frequency-division duplexing (FDD) massive MIMO systems in the downlink (DL) suffer significantly from the channel estimation overhead. In this thesis, we propose a minimum mean square error (MMSE)-based channel estimation framework that exploits the spatial correlation between the antennas at the BS to reduce the latter overhead. We investigate how the number of antennas at the BS affects the channel estimation error through analytical and asymptotic analysis. In addition, we derive a lower bound on the spectral efficiency of the communication system. Close form expressions of the asymptotic MSE and the spectral efficiency lower bound are obtained. Furthermore, perfect match between theoretical and simulation results is observed, and results show the feasibility of our proposed scheme.

Download or read book Massive MIMO Systems written by Kazuki Maruta and published by MDPI. This book was released on 2020-07-03 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple-input, multiple-output (MIMO), which transmits multiple data streams via multiple antenna elements, is one of the most attractive technologies in the wireless communication field. Its extension, called ‘massive MIMO’ or ‘large-scale MIMO’, in which base station has over one hundred of the antenna elements, is now seen as a promising candidate to realize 5G and beyond, as well as 6G mobile communications. It has been the first decade since its fundamental concept emerged. This Special Issue consists of 19 papers and each of them focuses on a popular topic related to massive MIMO systems, e.g. analog/digital hybrid signal processing, antenna fabrication, and machine learning incorporation. These achievements could boost its realization and deepen the academic and industrial knowledge of this field.

Download or read book TDD Massive MIMO Systems written by Elina Nayebi and published by . This book was released on 2018 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an ever-increasing demand for higher wireless throughput, there has been growing interest in massive multiple-input multiple-output (MIMO) as a key technology for future wireless networks. This dissertation addresses some of the key aspects of this technology that include: 1. precoding, power optimization, and access point (AP) location design in cell-free massive MIMO systems with distributed APs; 2. semi-blind channel estimation in massive MIMO systems. Cell-free massive MIMO is a special deployment of massive MIMO systems with a large number of distributed low-cost low-power single antenna APs serving a much smaller number of users. The cell-free system is not partitioned into cells and each user is served by all APs simultaneously. The downlink capacity lower bounds for conjugate beamforming and zero-forcing precoders in cell-free systems are derived in this dissertation. To further increase the achievable throughput, max-min power optimization algorithms are formulated, and low complexity max-min power allocation algorithms are developed. We also introduce a technique that employs L1-norm sparsity penalty in the max-min power optimization for conjugate beamforming that helps us decrease the number of APs that serve a user in a practical system. The uplink capacity lower bounds for minimum mean squared error (MMSE) and large scale fading decoding receivers in cell-free systems are provided. A deterministic approximation for signal-to-interference-plus-noise ratio of MMSE receiver is obtained with an unlimited number of APs and user devices. Next, AP location design problem is investigated to maximize the sum-throughput and the minimum-throughput in uplink transmission of cell-free systems with an arbitrary user distribution. Utilizing compressed sensing techniques, the AP placement problems are formulated as convex optimization problems. An AP location design algorithm is also presented in an alternative small-cell system in which each user is served by only one AP. Finally, semi-blind channel estimation for multiuser massive MIMO systems is investigated. Multiple semi-blind channel estimation techniques based on the expectation-maximization algorithm are developed by considering different priors on data symbols. Cramer Rao Bounds (CRBs) for semi-blind channel estimation are derived for deterministic and stochastic (Gaussian) data symbol models to give us an analytical understanding of the semi-blind scheme's performance. To get insight into the behavior of a massive MIMO system, the asymptotic behavior of the CRBs as the number of antennas at the base station grows is analyzed.

Download or read book Cell Free Massive MIMO written by Giovanni Interdonato and published by Linköping University Electronic Press. This book was released on 2020-09-09 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth generation of mobile communication systems (5G) is nowadays a reality. 5G networks are been deployed all over the world, and the first 5G-capable devices (e.g., smartphones, tablets, wearable, etc.) are already commercially available. 5G systems provide unprecedented levels of connectivity and quality of service (QoS) to cope with the incessant growth in the number of connected devices and the huge increase in data-rate demand. Massive MIMO (multiple-input multiple-output) technology plays a key role in 5G systems. The underlying principle of this technology is the use of a large number of co-located antennas at the base station, which coherently transmit/receive signals to/from multiple users. This signal co-processing at multiple antennas leads to manifold benefits: array gain, spatial diversity and spatial user multiplexing. These elements enable to meet the QoS requirements established for the 5G systems. The major bottleneck of massive MIMO systems as well as of any cellular network is the inter-cell interference, which affects significantly the cell-edge users, whose performance is already degraded by the path attenuation. To overcome these limitations and provide uniformly excellent service to all the users we need a more radical approach: we need to challenge the cellular paradigm. In this regard, cell-free massive MIMO constitutes the paradigm shift. In the cell-free paradigm, it is not the base station surrounded by the users, but rather it is each user being surrounded by smaller, simpler, serving base stations referred to as access points (APs). In such a system, each user experiences being in the cell-center, and it does not experience any cell boundaries. Hence, the terminology cell-free. As a result, users are not affected by inter-cell interference, and the path attenuation is significantly reduced due to the presence of many APs in their proximity. This leads to impressive performance. Although appealing from the performance viewpoint, the designing and implementation of such a distributed massive MIMO system is a challenging task, and it is the object of this thesis. More specifically, in this thesis we study: Paper A) The large potential of this promising technology in realistic indoor/outdoor scenarios while also addressing practical deployment issues, such as clock synchronization among APs, and cost-efficient implementations. We provide an extensive description of a cell-free massive MIMO system, emphasizing strengths and weaknesses, and pointing out differences and similarities with existing distributed multiple antenna systems, such as Coordinated MultiPoint (CoMP). Paper B) How to preserve the scalability of the system, by proposing a solution related to data processing, network topology and power control. We consider a realistic scenario where multiple central processing units serve disjoint subsets of APs, and compare the spectral efficiency provided by the proposed scalable framework with the canonical cell-free massive MIMO and CoMP. Paper C) How to improve the spectral efficiency (SE) in the downlink (DL), by devising two distributed precoding schemes, referred to as local partial zero-forcing (ZF) and local protective partial ZF, that provide an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-haul overhead, and that are implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. These closed-form expressions are then used to devise optimal max-min fairness power control. Paper D) How to further improve the SE by letting the user estimate the DL channel from DL pilots, instead of relying solely on the knowledge of the channel statistics. We derive an approximate closed-form expression of the DL SE for conjugate beamforming (CB), and assuming independent Rayleigh fading. This expression accounts for beamformed DL pilots, estimation errors and pilot contamination at both the AP and the user side. We devise a sequential convex approximation algorithm to globally solve the max-min fairness power control optimization problem, and a greedy algorithm for uplink (UL) and DL pilot assignment. The latter consists in jointly selecting the UL and DL pilot pair, for each user, that maximizes the smallest SE in the network. Paper E) A precoding scheme that is more suitable when only the channel statistics are available at the users, referred to as enhanced normalized CB. It consists in normalizing the precoding vector by its squared norm in order to reduce the fluctuations of the effective channel seen at the user, and thereby to boost the channel hardening. The performance achieved by this scheme is compared with the CB scheme with DL training (described in Paper D). Paper F) A maximum-likelihood-based method to estimate the channel statistics in the UL, along with an accompanying pilot transmission scheme, that is particularly useful in line-of-sight operation and in scenarios with resource constraints. Pilots are structurally phase-rotated over different coherence blocks to create an effective statistical distribution of the received pilot signal that can be efficiently exploited by the AP when performing the proposed estimation method. The overall conclusion is that cell-free massive MIMO is not a utopia, and a practical, distributed, scalable, high-performance system can be implemented. Today it represents a hot research topic, but tomorrow it might represent a key enabler for beyond-5G technology, as massive MIMO has been for 5G. La quinta generazione dei sistemi radiomobili cellulari (5G) è oggi una realtà. Le reti 5G si stanno diffondendo in tutto il mondo e i dispositivi 5G (ad esempio smartphones, tablets, indossabili, ecc.) sono già disponibili sul mercato. I sistemi 5G garantiscono livelli di connettività e di qualità di servizio senza precedenti, per fronteggiare l’incessante crescita del numero di dispositivi connessi alla rete e della domanda di dati ad alta velocità. La tecnologia Massive MIMO (multiple-input multiple-output) riveste un ruolo fondamentale nei sistemi 5G. Il principio alla base di questa tecnologia è l’impiego di un elevato numero di antenne collocate nella base station (stazione radio base) le quali trasmettono/ricevono segnali, in maniere coerente, a/da più terminali utente. Questo co-processamento del segnale da parte di più antenne apporta molteplici benefici: guadagno di array, diversità spaziale e multiplazione degli utenti nel dominio spaziale. Questi elementi consentono di raggiungere i requisiti di servizio stabiliti per i sistemi 5G. Tuttavia, il limite principale dei sistemi massive MIMO, così come di ogni rete cellulare, è rappresentato dalla interferenza inter-cella (ovvero l’interferenza tra aree di copertura gestite da diverse base stations), la quale riduce in modo significativo le performance degli utenti a bordo cella, già degradate dalle attenuazioni del segnale dovute alla considerevole distanza dalla base station. Per superare queste limitazioni e fornire una qualità del servizio uniformemente eccellente a tutti gli utenti, è necessario un approccio più radicale e guardare oltre il classico paradigma cellulare che caratterizza le attuali architetture di rete. A tal proposito, cell-free massive MIMO (massive MIMO senza celle) costituisce un cambio di paradigma: ogni utente è circondato e servito contemporaneamente da numerose, semplici e di dimensioni ridotte base stations, denominate access points (punti di accesso alla rete). Gli access points cooperano per servire tutti gli utenti nella loro area di copertura congiunta, eliminando l’interferenza inter-cella e il concetto stesso di cella. Non risentendo più dell’effetto “bordo-cella”, gli utenti possono usufruire di qualità di servizio e velocità dati eccellenti. Sebbene attraente dal punto di vista delle performance, l’implementazione di un tale sistema distribuito è una operazione impegnativa ed è oggetto di questa tesi. Piu specificatamente, questa tesi di dottorato tratta: Articolo A) L’enorme potenziale di questa promettente tecnologia in scenari realistici sia indoor che outdoor, proponendo anche delle soluzioni di implementazione flessibili ed a basso costo. Articolo B) Come preservare la scalabilità del sistema, proponendo soluzioni distribuite riguardanti il processamento e la condivisione dei dati, l’architettura di rete e l’allocazione di potenza, ovvero come ottimizzare i livelli di potenza trasmessa dagli access points per ridurre l’interferenza tra utenti e migliorare le performance. Articolo C) Come migliorare l’efficienza spettrale in downlink (da access point verso utente) proponendo due schemi di pre-codifica dei dati di trasmissione, denominati local partial zero-forcing (ZF) e local protective partial ZF, che forniscono un perfetto compromesso tra cancellazione dell’interferenza tra utenti ed amplificazione del segnale desiderato. Articolo D) Come migliorare l’efficienza spettrale in downlink permettendo al terminale utente di stimare le informazioni sulle condizioni istantanee del canale da sequenze pilota, piuttosto che basarsi su informazioni statistiche ed a lungo termine, come convenzionalmente previsto. Articolo E) In alternativa alla soluzione precedente, uno schema di pre-codifica che è più adatto al caso in cui gli utenti hanno a disposizione esclusivamente informazioni statistiche sul canale per poter effettuare la decodifica dei dati. Articolo F) Un metodo per permettere agli access points di stimare, in maniera rapida, le condizioni di canale su base statistica, favorito da uno schema di trasmissione delle sequenze pilota basato su rotazione di fase. Realizzare un sistema cell-free massive MIMO pratico, distribuito, scalabile e performante non è una utopia. Oggi questo concept rappresenta un argomento di ricerca interessante, attraente e stimolante ma in futuro potrebbe costituire un fattore chiave per le tecnologie post-5G, proprio come massive MIMO lo è stato per il 5G. Den femte generationens mobilkommunikationssystem (5G) är numera en verklighet. 5G-nätverk är utplacerade på ett flertal platser världen över och de första 5G-kapabla terminalerna (såsom smarta telefoner, surfplattor, kroppsburna apparater, etc.) är redan kommersiellt tillgängliga. 5G-systemen kan tillhandahålla tidigare oöverträffade nivåer av uppkoppling och servicekvalitet och är designade för en fortsatt oavbruten tillväxt i antalet uppkopplade apparater och ökande datataktskrav. Massiv MIMO-teknologi (eng: multiple-input multiple-output) spelar en nyckelroll i dagens 5G-system. Principen bakom denna teknik är användningen av ett stort antal samlokaliserade antenner vid basstationen, där alla antennerna sänder och tar emot signaler faskoherent till och från flera användare. Gemensam signalbehandling av många antennsignaler ger ett flertal fördelar, såsom hög riktverkan via lobformning, vilket leder till högre datatakter samt möjliggör att flera användare utnyttjar samma radioresurser via rumslig användarmultiplexering. Eftersom en signal kan gå genom flera olika, möjligen oberoende kanaler, så utsätts den för flera olika förändringar samtidigt. Denna mångfald ökar kvaliteten på signalen vid mottagaren och förbättrar radiolänkens robusthet och tillförlitlighet. Detta gör det möjligt att uppfylla de höga kraven på servicekvalitet som fastställts för 5G-systemen. Den största begränsningen för massiva MIMO-system såväl som för alla cellulära mobilnätverk, är störningar från andra celler som påverkar användare på cellkanten väsentligt, vars prestanda redan begränsas av sträckdämpningen på radiokanalen. För att övervinna dessa begränsningar och för att kunna tillhandahålla samma utmärkta servicekvalitet till alla användare behöver vi ett mer radikalt angreppssätt: vi måste utmana cellparadigmet. I detta avseende utgör cellfri massiv-MIMO teknik ett paradigmskifte. I cellfri massive-MIMO är utgångspunkten inte att basstationen är omgiven av användare som den betjänar, utan snarare att varje användare omges av basstationer som de betjänas av. Dessa basstationer, ofta mindre och enklare, kallas accesspunkter (AP). I ett sådant system upplever varje användare att den befinner sig i centrum av systemet och ingen användare upplever några cellgränser. Därav terminologin cellfri. Som ett resultat av detta påverkas inte användarna av inter-cellstörningar och sträckdämpningen reduceras kraftigt på grund av närvaron av många accesspunkter i varje användares närhet. Detta leder till imponerande prestanda. Även om det är tilltalande ur ett prestandaperspektiv så är utformningen och implementeringen av ett sådant distribuerat massivt MIMO-system en utmanande uppgift, och det är syftet med denna avhandling att studera detta. Mer specifikt studerar vi i denna avhandling: A) den mycket stora potentialen med denna teknik i realistiska inomhus- såväl som utomhusscenarier, samt hur man hanterar praktiska implementeringsproblem, såsom klocksynkronisering bland accesspunkter och kostnadseffektiva implementeringar; B) hur man ska uppnå skalbarhet i systemet genom att föreslå lösningar relaterade till databehandling, nätverkstopologi och effektkontroll; C) hur man ökar datahastigheten i nedlänken med hjälp av två nyutvecklade distribuerade överföringsmetoder som tillhandahåller en avvägning mellan störningsundertryckning och förstärkning av önskade signaler, utan att öka mängden intern signalering till de distribuerade accesspunkterna, och som kan implementeras i accesspunkter med mycket få antenner; D) hur man kan förbättra prestandan ytterligare genom att låta användaren estimera nedlänkskanalen med hjälp av nedlänkspiloter, istället för att bara förlita sig på kunskap om kanalstatistik; E) en överföringsmetod för nedlänk som är mer lämpligt när endast kanalstatistiken är tillgänglig för användarna. Prestandan som uppnås genom detta schema jämförs med en utökad variant av den nedlänk-pilotbaserade metoden (beskrivet i föregående punkt); F) en metod för att uppskatta kanalstatistiken i upplänken, samt en åtföljande pilotsändningsmetod, som är särskilt användbart vid direktvägsutbredning (line-of-sight) och i scenarier med resursbegränsningar. Den övergripande slutsatsen är att cellfri massiv MIMO inte är en utopi, och att ett distribuerat, skalbart, samt högpresterande system kan implementeras praktiskt. Idag representerar detta ett hett forskningsämne, men snart kan det visa sig vara en viktig möjliggörare för teknik bortom dagens system, på samma sätt som centraliserad massiv MIMO har varit för de nya 5G-systemen.

Download or read book Channel Estimation and Data Detection Methods for 1 bit Massive MIMO Systems written by David Kin Wai Ho and published by . This book was released on 2022 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Massive multiple-input multiple-output (MIMO) is a promising technology for next generation communication systems. In massive MIMO, a base station (BS) is equipped with a large antenna with potentially hundreds of antennas elements, allowing many users to be served simultaneously. Unfortunately, the hardware complexity and power consumption will scale with the number of antennas. The use of one-bit analog-to-digital converters (ADCs) provides an attractive solution to solve the above issues, since a one-bit ADC consumes negligible power and complex automatic gain control (AGC) can be removed. However, the signal distortion from the severe quantization poses significant challenges to the system designer. One bit quantization effectively removes all amplitude information, which is not recoverable by an increase in signal strength. This places a bound on channel estimation performance. Since the channel model is highly nonlinear, linear detector is suboptimal compared to more sophisticated nonlinear techniques. To reduce the impairment caused by one-bit quantization, a novel antithetic dithering scheme is developed. Antithetic dither is introduced into the system to generate negative correlated noise. Efficient channel estimation algorithms are developed to exploit the induced negative correlated noise in the system. A statistical framework is developed to validate the noise reduction from negative correlated quantized output. To improve the performance of data detection, feed forward neural network based detectors are developed, performance of these detectors are analyzed, architectural modification and training techniques are employed to partially resolve issues that prevent the networks from reaching ideal maximum likelihood performance. Next, model based approaches are evaluated and the shortcomings of iterative methods that rely on the exact likelihood are identified. Iterative methods based on the exact likelihood is shown to diverge due to the increasingly large gradient at high SNR. The constant gradient induced by the sigmoid approximation is shown to increase the robustness of these methods. A structured deep learning detector based on stochastic variational inference is proposed. Stochastic estimate of the gradient is introduced to reduce complexity of the algorithm. Damping is added to improve the performance of mean field inference. Parallel processing is proposed to reduce inference time. The proposed detector is shown to outperform existing methods that do not employ a second candidate search step.

Download or read book mmWave Massive MIMO written by Shahid Mumtaz and published by Academic Press. This book was released on 2016-12-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: mmWave Massive MIMO: A Paradigm for 5G is the first book of its kind to hinge together related discussions on mmWave and Massive MIMO under the umbrella of 5G networks. New networking scenarios are identified, along with fundamental design requirements for mmWave Massive MIMO networks from an architectural and practical perspective. Working towards final deployment, this book updates the research community on the current mmWave Massive MIMO roadmap, taking into account the future emerging technologies emanating from 3GPP/IEEE. The book's editors draw on their vast experience in international research on the forefront of the mmWave Massive MIMO research arena and standardization. This book aims to talk openly about the topic, and will serve as a useful reference not only for postgraduates students to learn more on this evolving field, but also as inspiration for mobile communication researchers who want to make further innovative strides in the field to mark their legacy in the 5G arena. Contains tutorials on the basics of mmWave and Massive MIMO Identifies new 5G networking scenarios, along with design requirements from an architectural and practical perspective Details the latest updates on the evolution of the mmWave Massive MIMO roadmap, considering future emerging technologies emanating from 3GPP/IEEE Includes contributions from leading experts in the field in modeling and prototype design for mmWave Massive MIMO design Presents an ideal reference that not only helps postgraduate students learn more in this evolving field, but also inspires mobile communication researchers towards further innovation

Download or read book Fundamentals of Massive MIMO written by Thomas L. Marzetta and published by Cambridge University Press. This book was released on 2016-11-17 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by pioneers of the concept, this is the first complete guide to the physical and engineering principles of Massive MIMO. Assuming only a basic background in communications and statistical signal processing, it will guide readers through key topics in multi-cell systems such as propagation modeling, multiplexing and de-multiplexing, channel estimation, power control, and performance evaluation. The authors' unique capacity-bounding approach will enable readers to carry out effective system performance analyses and develop advanced Massive MIMO techniques and algorithms. Numerous case studies, as well as problem sets and solutions accompanying the book online, will help readers put knowledge into practice and acquire the skill set needed to design and analyze complex wireless communication systems. Whether you are a graduate student, researcher, or industry professional working in the field of wireless communications, this will be an indispensable guide for years to come.

Download or read book WITS 2020 written by Saad Bennani and published by Springer Nature. This book was released on 2021-07-21 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed articles from the 6th International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS 2020), held at Fez, Morocco. It presents original research results, new ideas and practical lessons learnt that touch on all aspects of wireless technologies, embedded and intelligent systems. WITS is an international conference that serves researchers, scholars, professionals, students and academicians looking to foster both working relationships and gain access to the latest research results. Topics covered include Telecoms & Wireless Networking Electronics & Multimedia Embedded & Intelligent Systems Renewable Energies.

Download or read book Sparse Signal Processing for Massive MIMO Communications written by Zhen Gao and published by Springer Nature. This book was released on with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Massive MIMO written by Tianyuan Qiu and published by . This book was released on 2017 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: In future mobile data traffic, increasing of global exponential mobile data traffic, supporting more devices simultaneously and larger variety of traffic types are the main problems that wireless communication systems face. However, the MIMO technology cannot solve these problems well. Thus, the Massive MIMO technology, which deploy a large excess of antennas at BSs as compared to the number of terminal served, was proposed in 2010 by Thomas L. Marzetta. ☐ Massive MIMO is a multi-user MIMO technology where each BS is equipped with an array of M active antenna elements and utilizes these to communicate with K single-antenna terminals----over the same time and frequency band. ☐ The benefits of the Massive MIMO technology include increasing the capacity, improving the radiated energy-efficiency, reducing latency on the air interface and increasing the robustness both to unintended man-made interference and to intentional jamming, etc. Nevertheless, the Massive MIMO technology also faces some challenges and pilot contamination is one of them. ☐ In this thesis, firstly, I will introduce the background and significance of the Massive MIMO. Secondly, I will introduce the Massive MIMO system which will include the comparison between TDD mode and FDD mode, the introduction for the system model, the pilot-based channel estimation and the pilot contamination. ☐ Finally, I will review and simulate some methods to mitigate the pilot contamination like Bayes channel estimation and pilot scheduling.

Download or read book Channel Feedback in FDD Massive MIMO Systems with Multiple antenna Users written by Mahmoud Alaa Eldin and published by . This book was released on 2019 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: In this thesis, we consider the problem of Angle of Departure (AoD) based channel feedback in Frequency Division Duplex (FDD) massive Multiple-Input Multiple-Output (MIMO) systems with multiple antennas at the users. We consider the use of Zero-Forcing Block Diagonalization (BD) as the down- link precoding scheme. We consider two different cases; one in which the number of streams intended for a user equals the number of antennas at that user and the other case in which the number of streams is less than the number of user antennas. BD requires the feedback of the subspace spanned by the channel matrix at the user or a subspace of it in the case of having a smaller number of streams than the number of antennas at a specific user. Based on our channel model, we propose a channel feedback scheme that requires less feedback overhead compared to feeding back the whole channel matrix. Then, we quantify the rate gap between the rate of the system with perfect Channel State Information (CSI) at the massive MIMO Basestation (BS) and our proposed channel feedback scheme for a given number of feedback bits. Finally, we design feedback codebooks based on optimal subspace packing in the Grassmannian manifold. We show that our proposed codes achieve performance that is very close to the performance of the system with perfect CSI at the BS. We also propose a vector quantization scheme to quantize the channel matrix of the user when optimal power allocation across multiple streams is adopted. Simulation results show that the vector quantization scheme combined with power optimization across the streams outperforms the subspace quantization scheme at the low SNR regime. However, the situation is reversed at high SNR levels and subspace quantization with uniform power allocation becomes better.

Download or read book Academic Press Library in Signal Processing Volume 7 written by and published by Academic Press. This book was released on 2017-12-01 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic Press Library in Signal Processing, Volume 7: Array, Radar and Communications Engineering is aimed at university researchers, post graduate students and R&D engineers in the industry, providing a tutorial-based, comprehensive review of key topics and technologies of research in Array and Radar Processing, Communications Engineering and Machine Learning. Users will find the book to be an invaluable starting point to their research and initiatives. With this reference, readers will quickly grasp an unfamiliar area of research, understand the underlying principles of a topic, learn how a topic relates to other areas, and learn of research issues yet to be resolved. Presents a quick tutorial of reviews of important and emerging topics of research Explores core principles, technologies, algorithms and applications Edited and contributed by international leading figures in the field Includes comprehensive references to journal articles and other literature upon which to build further, more detailed knowledge

Download or read book Communications Signal Processing and Systems written by Qilian Liang and published by Springer Nature. This book was released on 2023-03-28 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers presented at the 2021 International Conference on Communications, Signal Processing, and Systems, Changbaishan, China, July 23-24, 2022, which provides a venue to disseminate the latest developments and to discuss the interactions and links between these multidisciplinary fields. Spanning topics ranging from communications, signal processing and systems, this book is aimed at undergraduate and graduate students in Electrical Engineering, Computer Science and Mathematics, researchers and engineers from academia and industry as well as government employees (such as NSF, DOD and DOE).

Download or read book Limited Feedback Scheme Using Tensor Decompositions for FDD Massive MIMO Systems written by Kevin Jinho Joe and published by . This book was released on 2020 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: We propose a novel limited feedback scheme for massive multiple-input multiple-output (MIMO) systems in frequency-division duplexing (FDD) wideband system. We assume that the user (UE) has knowledge of a downlink (DL) channel estimate. In order for massive MIMO systems to achieve high capacity, the base station (BS) must have the DL channel state information. Traditional feedback methods cannot work because channels for massive MIMO systems are usually too large to feedback within the coherence time. Our goal is to feedback the DL channel estimate from the UE back to the BS with as little information as possible. Our method uses two different tensor decompositions, the canonical polyadic decomposition (CPD) and the rank-(L [subscript r], L [subscript r], 1) or LL-1 block decomposition, on the DL frequency channel to estimate its parameters. By feeding back only the channel parameters, we show through simulations that our method is able to efficiently and accurately reconstruct the DL channel