Download or read book Introduction to MIMO Communications written by Jerry R. Hampton and published by Cambridge University Press. This book was released on 2014 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible guide contains everything you need to get up to speed on the theory and implementation of MIMO techniques.

Download or read book Channel Estimation for Physical Layer Network Coding Systems written by Feifei Gao and published by Springer. This book was released on 2014-10-15 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SpringerBrief presents channel estimation strategies for the physical later network coding (PLNC) systems. Along with a review of PLNC architectures, this brief examines new challenges brought by the special structure of bi-directional two-hop transmissions that are different from the traditional point-to-point systems and unidirectional relay systems. The authors discuss the channel estimation strategies over typical fading scenarios, including frequency flat fading, frequency selective fading and time selective fading, as well as future research directions. Chapters explore the performance of the channel estimation strategy and optimal structure of training sequences for each scenario. Besides the analysis of channel estimation strategies, the book also points out the necessity of revisiting other signal processing issues for the PLNC system. Channel Estimation of Physical Layer Network Coding Systems is a valuable resource for researchers and professionals working in wireless communications and networks. Advanced-level students studying computer science and electrical engineering will also find the content helpful.

Download or read book Performance evaluation of channel estimation techniques for LTE downlink system written by Kahsay Meresa and published by Lulu.com. This book was released on 2016-12-03 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis channel estimation techniques for LTE downlink named Least Square, Minimum Mean Square error and Maximum Likelihood estimation techniques are studied for the pilot symbol based channel estimation. In addition to this the performances of these three channel estimation techniques were also studied by introducing averaging, interpolation and hybrid methods.This work also investigates the complexity of the channel estimation techniques in terms of the number of complex multiplications and by varying the FFT size and number of CP(cyclic prefix). furthermore, the effect of varying the number of antennas at the transmitter and receiver ends, where 2 x 2 and 4 x 4 antenna arrangements are considered as a case studies. The performance of these channel estimation techniques is also studied for EVA standard channel model in LTE. The considered channel model is EVA standard channel model with Doppler shift of 300HZ.

Download or read book Propagation Channel Characterization Parameter Estimation and Modeling for Wireless Communications written by Xuefeng Yin and published by John Wiley & Sons. This book was released on 2016-10-24 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference giving a thorough explanation of propagation mechanisms, channel characteristics results, measurement approaches and the modelling of channels Thoroughly covering channel characteristics and parameters, this book provides the knowledge needed to design various wireless systems, such as cellular communication systems, RFID and ad hoc wireless communication systems. It gives a detailed introduction to aspects of channels before presenting the novel estimation and modelling techniques which can be used to achieve accurate models. To systematically guide readers through the topic, the book is organised in three distinct parts. The first part covers the fundamentals of the characterization of propagation channels, including the conventional single-input single-output (SISO) propagation channel characterization as well as its extension to multiple-input multiple-output (MIMO) cases. Part two focuses on channel measurements and channel data post-processing. Wideband channel measurements are introduced, including the equipment, technology and advantages and disadvantages of different data acquisition schemes. The channel parameter estimation methods are then presented, which include conventional spectral-based estimation, the specular-path-model based high-resolution method, and the newly derived power spectrum estimation methods. Measurement results are used to compare the performance of the different estimation methods. The third part gives a complete introduction to different modelling approaches. Among them, both scattering theoretical channel modelling and measurement-based channel modelling approaches are detailed. This part also approaches how to utilize these two modelling approaches to investigate wireless channels for conventional cellular systems and some new emerging communication systems. This three-part approach means the book caters for the requirements of the audiences at different levels, including readers needing introductory knowledge, engineers who are looking for more advanced understanding, and expert researchers in wireless system design as a reference. Presents technical explanations, illustrated with examples of the theory in practice Discusses results applied to 4G communication systems and other emerging communication systems, such as relay, CoMP, and vehicle-to-vehicle rapid time-variant channels Can be used as comprehensive tutorial for students or a complete reference for engineers in industry Includes selected illustrations in color Program downloads available for readers Companion website with program downloads for readers and presentation slides and solution manual for instructors Essential reading for Graduate students and researchers interested in the characteristics of propagation channel, or who work in areas related to physical layer architectures, air interfaces, navigation, and wireless sensing

Download or read book EFFECTIVE SPARSE CHANNEL ESTIMATION TECHNIQUE FOR MIMO OFDM SYSTEM written by Dr.Maddala Vijayalakshmi and published by Archers & Elevators Publishing House. This book was released on with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multi Carrier Systems Solutions 2009 written by Simon Plass and published by Springer Science & Business Media. This book was released on 2009-04-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th International Workshop on Multi-Carrier Systems and Solutions was held in May 2009. In providing the proceedings of that conference, this book offers comprehensive, state-of-the-art articles about multi-carrier techniques and systems.

Download or read book Coding and Channel Estimation for Block Fading Channels written by Salam A. Zummo and published by . This book was released on 2003 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Communication Receivers Synchronization Channel Estimation and Signal Processing written by Heinrich Meyr and published by Wiley-Interscience. This book was released on 1997-11-03 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Communication Receivers Synchronization, Channel Estimation, and Signal Processing Digital Communication Receivers offers a complete treatment on the theoretical and practical aspects of synchronization and channel estimation from the standpoint of digital signal processing. The focus on these increasingly important topics, the systematic approach to algorithm development, and the linked algorithm-architecture methodology in digital receiver design are unique features of this book. The material is structured according to different classes of transmission channels. In Part C, baseband transmission over wire or optical fiber is addressed. Part D covers passband transmission over satellite or terrestrial wireless channels. Part E deals with transmission over fading channels. Designed for the practicing communication engineer and the graduate student, the book places considerable emphasis on helpful examples, summaries, illustrations, and bibliographies. Contents include: * Basic material * Baseband communications * Passband transmission * Receiver structure for PAM signals * Synthesis of synchronization algorithms * Performance analysis of synchronizers * Bit error degradation caused by random tracking errors * Frequency estimation * Timing adjustment by interpolation * DSP system implementation * Characterization, modeling, and simulation of linear fading channels * Detection and parameter synchronization on fading channels * Receiver structures for fading channels * Parameter synchronization for flat fading channels * Parameter synchronization for selective fading channels

Download or read book MIMO OFDM for LTE WiFi and WiMAX written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2010-11-01 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM for LTE, WIFI and WIMAX: Coherent versus Non-Coherent and Cooperative Turbo-Transceivers provides an up-to-date portrayal of wireless transmission based on OFDM techniques augmented with Space-Time Block Codes (STBCs) and Spatial-Division Multiple Access (SDMA). The volume also offers an in-depth treatment of cutting-edge Cooperative Communications. This monograph collates the latest techniques in a number of specific design areas of turbo-detected MIMO-OFDM wireless systems. As a result a wide range of topical subjects are examined, including channel coding and multiuser detection (MUD), with a special emphasis on optimum maximum-likelihood (ML) MUDs, reduced-complexity genetic algorithm aided near-ML MUDs and sphere detection. The benefits of spreading codes as well as joint iterative channel and data estimation are only a few of the radical new features of the book. Also considered are the benefits of turbo and LDPC channel coding, the entire suite of known joint coding and modulation schemes, space-time coding as well as SDM/SDMA MIMOs within the context of various application examples. The book systematically converts the lessons of Shannon's information theory into design principles applicable to practical wireless systems; the depth of discussions increases towards the end of the book. Discusses many state-of-the-art topics important to today's wireless communications engineers. Includes numerous complete system design examples for the industrial practitioner. Offers a detailed portrayal of sphere detection. Based on over twenty years of research into OFDM in the context of various applications, subsequently presenting comprehensive bibliographies.

Download or read book Analysis and Design of Communication Techniques in Spectrally Efficient Wireless Relaying Systems written by Jian Zhao and published by Logos Verlag Berlin GmbH. This book was released on 2010 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation studies the communication technologies in relaying systems with multiple antennas, especially in the multiple-input multiple-output (MIMO) two-way relaying systems. Both information-theoretic aspects and practical communication strategies are considered and analyzed. For the information-theoretic analysis, an analytical framework for the coverage of MIMO relaying systems based on an outage capacity criterion is proposed. For MIMO two-way relaying systems, different data combining schemes at the relay are compared based on their achievable rates. In addition, optimal time-division (TD) strategies for MIMO two-way decode-and-forward (DF) relaying systems are proposed and analyzed. When the optimal TD strategies are applied, the increase of the achievable rate regions in the system is significant compared to those using the equal TD strategy. For the practical transmission schemes, we propose the self-interference (SI) aided channel estimation and data detection schemes for the broadcast phase of two-way DF relaying systems. Such schemes exploit the SI in two-way DF relaying systems when the superposition coding (SPC) scheme is applied. When the network coding scheme is applied in two-way DF relaying systems, we propose an asymmetric data rate transmission scheme that utilizes the known data bits at the receivers. Such a scheme exploits the a priori known bits at the weak link receiver in the broadcast phase of two-way relaying systems.

Download or read book Wireless Communications Over Rapidly Time Varying Channels written by Franz Hlawatsch and published by Academic Press. This book was released on 2011-05-04 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of higher frequencies and increased user mobility, researchers and systems designers are shifting their focus from time-invariant models to channels that vary within a block. Wireless Communications Over Rapidly Time-Varying Channels explains the latest theoretical advances and practical methods to give an understanding of rapidly time varying channels, together with performance trade-offs and potential performance gains, providing the expertise to develop future wireless systems technology. As well as an overview of the issues of developing wireless systems using time-varying channels, the book gives extensive coverage to methods for estimating and equalizing rapidly time-varying channels, including a discussion of training data optimization, as well as providing models and transceiver methods for time-varying ultra-wideband channels. - An introduction to time-varying channel models gives in a nutshell the important issues of developing wireless systems technology using time-varying channels - Extensive coverage of methods for estimating and equalizing rapidly time-varying channels, including a discussion of training data optimization, enables development of high performance wireless systems - Chapters on transceiver design for OFDM and receiver algorithms for MIMO communication channels over time-varying channels, with an emphasis on modern iterative turbo-style architectures, demonstrates how these important technologies can optimize future wireless systems

Download or read book Wireless Communications written by Giorgio A. Vitetta and published by John Wiley & Sons. This book was released on 2013-03-29 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the theoretical elements at the basis of various classes of algorithms commonly employed in the physical layer (and, in part, in MAC layer) of wireless communications systems. It focuses on single user systems, so ignoring multiple access techniques. Moreover, emphasis is put on single-input single-output (SISO) systems, although some relevant topics about multiple-input multiple-output (MIMO) systems are also illustrated. Comprehensive wireless specific guide to algorithmic techniques Provides a detailed analysis of channel equalization and channel coding for wireless applications Unique conceptual approach focusing in single user systems Covers algebraic decoding, modulation techniques, channel coding and channel equalisation

Download or read book International Conference on Remote Sensing and Wireless Communications RSWC 2014 written by John Kong and published by DEStech Publications, Inc. This book was released on 2014-02-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Remote Sensing and Wireless Communications (RSWC 2014) will be held from February 22nd to 23rd, 2014 in Shanghai, China. RSWC 2014 will bring together top researchers from Asian Pacific areas, North America, Europe and around the world to exchange research results and address open issues in all aspects of Remote Sensing and Wireless Communications. The RSWC 2014 welcomes the submission of original full research papers, short papers, posters, workshop proposals, tutorials, and industrial professional reports.

Download or read book Circuits and Systems for Wireless Communications written by Markus Helfenstein and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: RF System Integration. 1. RF System Integration; C. Toumazou. 2. RF System Board Level Integration for Mobile Phones; G.J. Aspin. 3. Integration of RF Systems on a Chip; P.J. Mole. 4. Towards the Full Integration of Wireless Front-End Circuits; M. Steyaert. 5. GSM Transceiver Front-End Circuits in 0.25 mum CMOS; Q. Huang, et al. Part II: RF Front-End Circuits. 6. RF Front-End Circuits; Q. Huang. 7. Phase-Noise-to-Carrier Ratio in LC Oscillators; Q. Huang. 8. Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-Band Applications; B. Razavi. 9. Integrated Wireless Transc.

Download or read book Multi Carrier Spread Spectrum written by Khaled Fazel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The benefits and success of multi-carrier (MC) modulation on one side and the flexibility offered by the spread spectrum (SS) technique on the other side have motivated many researchers to investigate the combination of both techniques since 1993. This combination known as multi-carrier spread spectrum (MC-SS) benefits from the advantages of both systems and offers high flexibility, high spectral efficiency, simple detection strategies, narrow-band interference rejection capability, etc. The basic principle of this combination is straightforward: The spreading is performed as direct sequence spread spectrum (DS-SS) but instead of transmitting the chips over a single carrier, several sub-carriers are employed. The MC modulation and demodulation can easily be realized in the digital domain by performing IFFT and FFT operations. The separation of the users' signals can be performed in the code domain. MC-SS systems can perform the spreading in frequency direction, which allows for simple signal detection strategies. Since 1993, MC-SS has been deeply studied and new alternative solutions have been proposed. Meanwhile, deep system analysis and comparison with DS-CDMA have been performed that show the superiority of MC-CDMA.

Download or read book MIMO OFDM Wireless Communications with MATLAB written by Yong Soo Cho and published by John Wiley & Sons. This book was released on 2010-08-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM is a key technology for next-generation cellular communications (3GPP-LTE, Mobile WiMAX, IMT-Advanced) as well as wireless LAN (IEEE 802.11a, IEEE 802.11n), wireless PAN (MB-OFDM), and broadcasting (DAB, DVB, DMB). In MIMO-OFDM Wireless Communications with MATLAB®, the authors provide a comprehensive introduction to the theory and practice of wireless channel modeling, OFDM, and MIMO, using MATLAB® programs to simulate the various techniques on MIMO-OFDM systems. One of the only books in the area dedicated to explaining simulation aspects Covers implementation to help cement the key concepts Uses materials that have been classroom-tested in numerous universities Provides the analytic solutions and practical examples with downloadable MATLAB® codes Simulation examples based on actual industry and research projects Presentation slides with key equations and figures for instructor use MIMO-OFDM Wireless Communications with MATLAB® is a key text for graduate students in wireless communications. Professionals and technicians in wireless communication fields, graduate students in signal processing, as well as senior undergraduates majoring in wireless communications will find this book a practical introduction to the MIMO-OFDM techniques. Instructor materials and MATLAB® code examples available for download at www.wiley.com/go/chomimo

Download or read book Microwave Devices and Circuits for Advanced Wireless Communication written by Dilip Kumar Choudhary and published by CRC Press. This book was released on 2024-08-27 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of design and analysis of microwave devices and circuits for 5G and beyond wireless communication systems. It focuses on modern microwave antennas, filters, metamaterials, and MIMO systems. It includes a design approach based on Artificial Intelligence and the practical use of microwave devices and circuits in commercial, medical, and military applications. Microwave Devices and Circuits for Advanced Wireless Communications: Design and Analysis explores the performance of microwave devices and circuits by highlighting the difficulties encountered by researchers and designers such as latency, interoperability, wireless coexistence, data streaming, safety, security, and privacy. The book explores the most important aspects of antenna design, including radiation pattern control, impedance matching with bandwidth improvement, and gain enhancement. It also examines different categories of metasurfaces, including frequency-selective surfaces (FSS) and electromagnetic bandgap (EBG) structures, and their distinct roles in antenna design. Additionally, the book examines concepts such as ultra-wideband (UWB) radar for 5G millimeter wave applications, and advanced techniques such as synthetic aperture radar (SAR), beam-forming, compressed sensing, and diffraction tomography for enabling high-resolution imaging across wider application areas. The authors also present an overview on applying machine learning (ML) techniques to advanced wireless communication for signal-processing tasks such as signal denoising, equalization, and modulation recognition. They then discuss the potential significance of UAV communication systems in achieving seamless connection, quality of service (QoS), as well as the difficulties and potential remedies involved in building dependable networks using UAVs. Throughout the book the authors offer a critical assessment of the strengths and limitations of each topic and approach presented, thus providing valuable guidance for future research in this exciting field. This book will be helpful for graduate students, researchers, and engineers working in the area of design and reliability of circuits for microwave and communication systems.