Download or read book IBM Tivoli Storage Productivity Center for Replication for System z written by Mary Lovelace and published by IBM Redbooks. This book was released on 2014-05-06 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: IBM® Tivoli® Storage Productivity Center for Replication provides support for the advanced copy services capabilities on the DS8000® and DS6000TM, in addition to the support for SAN Volume Controller. This support focuses on automating administration and configuration of these services, operational control (starting, suspending, resuming) copy services tasks, and monitoring and managing the copy services sessions. In addition to the support for FlashCopy® and Metro Mirror, Tivoli Storage Productivity Center for Replication supports Global Mirror on the DS8000, and SAN Volume hardware platforms. Advanced disaster recovery functions are also supported with failover/failback (planned and unplanned) from a primary site to a disaster recovery site. A new product, IBM Tivoli Storage Productivity Center for Replication Basic Edition for System z® enables Basic HyperSwap® on z/OS®, which allows the management of disk replication services using an intuitive GUI on z/OS systems. Tivoli Storage Productivity Center for Replication also can monitor the performance of the copy services that provide a measurement of the amount of replication and the amount of time that is required to complete the replication operations. This IBM Redbooks® publication provides the information you need to install Tivoli Storage Productivity Center for Replication V5.1, and create and manage replication sessions on a z/OS platform. Scenarios are provided that document the work performed in our laboratory setting, using the GUI and CLI.

Download or read book On Scene written by and published by . This book was released on 2003 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Marine Safety Security Council written by and published by . This book was released on with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shareholder Activism written by H. Rho and published by Springer. This book was released on 2006-12-06 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shareholder activism in Korea, led by a civil society organization, has been commended by Western economists. How could activism led by such an organization grow and thrive to become the success story of corporate governance reform in developing countries? This book examines this phenomenon using social movement theory to explain.

Download or read book US Military written by and published by PediaPress. This book was released on with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Report written by and published by . This book was released on 1979 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Army written by and published by . This book was released on 1989 with total page 1236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manuals Combined U S Coast Guard Marine Safety Manual Volumes I II and III written by and published by Jeffrey Frank Jones. This book was released on with total page 2312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 2,300 total pages ... Titles included: Marine Safety Manual Volume I: Administration And Management Marine Safety Manual Volume II: Materiel Inspection Marine Safety Manual Volume III: Marine Industry Personnel

Download or read book GPS For Dummies written by Joel McNamara and published by John Wiley & Sons. This book was released on 2008-10-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need directions? Are you good at getting lost? Then GPS is just the technology you’ve dreamed of, and GPS For Dummies is what you need to help you make the most of it. If you have a GPS unit or plan to buy one, GPS For Dummies, 2nd Edition helps you compare GPS technologies, units, and uses. You’ll find out how to create and use digital maps and learn about waypoints, tracks, coordinate systems, and other key point to using GPS technology. Get more from your GPS device by learning to use Web-hosted mapping services and even how to turn your cell phone or PDA into a GPS receiver. You’ll also discover: Up-to-date information on the capabilities of popular handheld and automotive Global Positioning Systems How to read a map and how to get more from the free maps available online The capabilities and limitations of GPS technology, and how satellites and radio systems make GPS work How to interface your GPS receiver with your computer and what digital mapping software can offer Why a cell phone with GPS capability isn’t the same as a GPS unit What can affect your GPS reading and how accurate it will be How to use Street Atlas USA, TopoFusion, Google Earth, and other tools Fun things to do with GPS, such as exploring topographical maps, aerial imagery, and the sport of geocaching Most GPS receivers do much more than their owners realize. With GPS For Dummies, 2nd Edition in hand, you’ll venture forth with confidence!

Download or read book Advanced Programming in the UNIX Environment written by W. Richard Stevens and published by Pearson Education. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than twenty years, serious C programmers have relied on one book for practical, in-depth knowledge of the programming interfaces that drive the UNIX and Linux kernels: W. Richard Stevens' Advanced Programming in the UNIX(R) Environment . Now, once again, Rich's colleague Steve Rago has thoroughly updated this classic work. The new third edition supports today's leading platforms, reflects new technical advances and best practices, and aligns with Version 4 of the Single UNIX Specification. Steve carefully retains the spirit and approach that have made this book so valuable. Building on Rich's pioneering work, he begins with files, directories, and processes, carefully laying the groundwork for more advanced techniques, such as signal handling and terminal I/O. He also thoroughly covers threads and multithreaded programming, and socket-based IPC. This edition covers more than seventy new interfaces, including POSIX asynchronous I/O, spin locks, barriers, and POSIX semaphores. Most obsolete interfaces have been removed, except for a few that are ubiquitous. Nearly all examples have been tested on four modern platforms: Solaris 10, Mac OS X version 10.6.8 (Darwin 10.8.0), FreeBSD 8.0, and Ubuntu version 12.04 (based on Linux 3.2). As in previous editions, you'll learn through examples, including more than ten thousand lines of downloadable, ISO C source code. More than four hundred system calls and functions are demonstrated with concise, complete programs that clearly illustrate their usage, arguments, and return values. To tie together what you've learned, the book presents several chapter-length case studies, each reflecting contemporary environments. Advanced Programming in the UNIX(R) Environment has helped generations of programmers write code with exceptional power, performance, and reliability. Now updated for today's systems, this third edition will be even more valuable.

Download or read book Frontiers of Computer Vision written by Wataru Ohyama and published by Springer Nature. This book was released on 2020-04-27 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes refereed proceedings of the 26th International Workshop Frontiers of Computer Vision, IW-FCV 2020, held in Ibusuki, Kagoshima, Japan, in February 2020. The 27 full papers presented were thoroughly reviewed and selected from 68 submissions. The papers in the volume are organized according to the following topics: real-world applications; face, pose, and action recognition; object detection and tracking; inspection and diagnosis; camera, 3D and imaging.

Download or read book Data Mining written by United States. General Accounting Office and published by . This book was released on 2004 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Occupational Outlook Quarterly written by and published by . This book was released on 2000 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The History of Visual Magic in Computers written by Jon Peddie and published by Springer Science & Business Media. This book was released on 2013-06-13 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you have ever looked at a fantastic adventure or science fiction movie, or an amazingly complex and rich computer game, or a TV commercial where cars or gas pumps or biscuits behaved liked people and wondered, “How do they do that?”, then you’ve experienced the magic of 3D worlds generated by a computer. 3D in computers began as a way to represent automotive designs and illustrate the construction of molecules. 3D graphics use evolved to visualizations of simulated data and artistic representations of imaginary worlds. In order to overcome the processing limitations of the computer, graphics had to exploit the characteristics of the eye and brain, and develop visual tricks to simulate realism. The goal is to create graphics images that will overcome the visual cues that cause disbelief and tell the viewer this is not real. Thousands of people over thousands of years have developed the building blocks and made the discoveries in mathematics and science to make such 3D magic possible, and The History of Visual Magic in Computers is dedicated to all of them and tells a little of their story. It traces the earliest understanding of 3D and then foundational mathematics to explain and construct 3D; from mechanical computers up to today’s tablets. Several of the amazing computer graphics algorithms and tricks came of periods where eruptions of new ideas and techniques seem to occur all at once. Applications emerged as the fundamentals of how to draw lines and create realistic images were better understood, leading to hardware 3D controllers that drive the display all the way to stereovision and virtual reality.

Download or read book Canon EOS 5D Mark II written by Michael Guncheon and published by Sterling Publishing Company, Inc.. This book was released on 2009 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps owners of Canon EOS 5D Mark II model. This title reveals how to master the camera's 1080p HD video recording mode along with the other features on this highly innovative compact.

Download or read book Curvy Log Cabin Quilts written by Jean Ann Wright and published by Landauer (IL). This book was released on 2015-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Make perfect curvy log cabin blocks easily with no math and no measuring"--Cover.

Download or read book Soft and Stiffness controllable Robotics Solutions for Minimally Invasive Surgery written by Jelizaveta Konstantinova and published by CRC Press. This book was released on 2022-09-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft and Stiffness-controllable Robotics Solutions for Minimally Invasive Surgery presents the results of a research project, funded by European Commission, STIFF-FLOP: STIFFness controllable Flexible and Learn-able manipulator for surgical Operations. In Minimally Invasive Surgery (MIS), tools go through narrow openings and manipulate soft organs that can move, deform, or change stiffness. There are limitations on modern laparoscopic and robot-assisted surgical systems due to restricted access through Trocar ports, lack of haptic feedback, and difficulties with rigid robot tools operating inside a confined space filled with organs. Also, many control algorithms suffer from stability problems in the presence of unexpected conditions. Yet biological "manipulators", like the octopus arm can manipulate objects while controlling the stiffness of selected body parts and being inherently compliant when interacting with objects. STIFF-FLOP robot is an innovative soft robotic arm that can squeeze through a standard MIS, reconfigure itself and stiffen by hydrostatic actuation to perform compliant force control tasks while facing unexpected situations. Technical topics discussed in the book include:Soft actuatorsContinuum soft manipulatorsControl, kinematics and navigation of continuum manipulatorsOptical sensors for force, torque, and curvatureHaptic feedback and human interface for surgical systemsValidation of soft stiffness controllable robots