Download or read book Cfd Simulation of Multicomponent Gas Flow Through Porous Media written by Chethan Mohan Kumar and published by . This book was released on 2013-09 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2013 in the subject Engineering - Computer Engineering, grade: none, University of Wuppertal, course: Computational Mechanics of Engineering - Computational Fluid Dynamics, language: English, abstract: The objective of this thesis is to develop a generic CFD solver to simulate multicomponent gas transport involving multiscales. A comparative study between the mixture and Eulerian approach for multicomponent flows is done. Eulerian approach where every component has its own characteristic velocity is used in this work with reasons stated. Inter-component momentum exchange term has been modelled using Maxwell-Stefan relations. A semi-heuristic drag term for modelling porous drag is used. Temperature transport for the mixture is developed by considering an ensemble averaging method of all components for the mixture. Volume averaged form for all the equations is applied by considering fluid in presence of porous media as a pseudo-homogeneous medium. All the equations and terms mentioned are implemented in the solver. An open source CFD software OpenFOAM has been used to develop the solver. Capability of the solver to simulate diffusion dominated mass transfer has been established by using a Loschmidt tube which involves diffusion of a ternary mixture. Accuracy of 0.5% is observed for the case in comparison with analytical solution for the problem in one dimension. Validation of porous drag and energy transport has been done by using a fully developed laminar flow over two parallel plates and comparing the Nusselt numbers. The Nusselt numbers of 8.85 and 9.13 for porous and non-porous zones were observed compared to the literature values of 7.54 and 9.8. The reason for the deviations are stated.
Download or read book Hydrodynamics of Gas Liquid Reactors written by Barry Azzopardi and published by John Wiley & Sons. This book was released on 2011-05-12 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of chemical reactors and their safety are as critical to the success of a chemical process as the actual chemistry taking place within the reactor. This book provides a comprehensive overview of the practical aspects of multiphase reactor design and operation with an emphasis on safety and clean technology. It considers not only standard operation conditions, but also the problems of runaway reaction conditions and protection against ensuing over-pressure. Hydrodynamics of Multiphase Reactors addresses both practical and theoretical aspects of this topic. Initial chapters discuss various different types of gas/liquid reactors from a practical viewpoint, and later chapters focus on the modelling of multiphase systems and computational methods for reactor design and problem solving. The material is written by experts in their specific fields and will include chapters on the following topics: Multiphase flow, Bubble columns, Sparged stirred vessels, Macroscale modelling, Microscale modelling, Runaway conditions, Behaviour of vessel contents, Choked flow, Measurement techniques.
Download or read book Multiphase Lattice Boltzmann Methods written by Haibo Huang and published by John Wiley & Sons. This book was released on 2015-06-08 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Application of Multiphase Lattice Boltzmann Methods presents a comprehensive review of all popular multiphase Lattice Boltzmann Methods developed thus far and is aimed at researchers and practitioners within relevant Earth Science disciplines as well as Petroleum, Chemical, Mechanical and Geological Engineering. Clearly structured throughout, this book will be an invaluable reference on the current state of all popular multiphase Lattice Boltzmann Methods (LBMs). The advantages and disadvantages of each model are presented in an accessible manner to enable the reader to choose the model most suitable for the problems they are interested in. The book is targeted at graduate students and researchers who plan to investigate multiphase flows using LBMs. Throughout the text most of the popular multiphase LBMs are analyzed both theoretically and through numerical simulation. The authors present many of the mathematical derivations of the models in greater detail than is currently found in the existing literature. The approach to understanding and classifying the various models is principally based on simulation compared against analytical and observational results and discovery of undesirable terms in the derived macroscopic equations and sometimes their correction. A repository of FORTRAN codes for multiphase LBM models is also provided.
Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-04-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a fundamental and practical introduction to the use of computational methods. A thorough discussion of practical aspects of the subject is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Each chapter ends with bibliographic information and exercises.
Download or read book An Introduction to Multiphase Multicomponent Reservoir Simulation written by Matthew Balhoff and published by Elsevier. This book was released on 2022-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Petroleum Reservoir Simulation is aimed toward graduate students and professionals in the oil and gas industry working in reservoir simulation. It begins with a review of fluid and rock properties and derivation of basic reservoir engineering mass balance equations. Then equations and approaches for numerical reservoir simulation are introduced. The text starts with simple problems (1D, single phase flow in homogeneous reservoirs with constant rate wells) and subsequent chapters slowly add complexities (heterogeneities, nonlinearities, multi-dimensions, multiphase flow, and multicomponent flow). Partial differential equations and finite differences are then introduced but it will be shown that algebraic mass balances can also be written directly on discrete grid blocks that result in the same equations. Many completed examples and figures will be included to improve understanding. An Introduction to Petroleum Reservoir Simulation is designed for those with their first exposure to reservoir simulation, including graduate students in their first simulation course and working professionals who are using reservoir simulators and want to learn more about the basics. - Presents basic equations and discretization for multiphase, multicomponent transport in subsurface media in a simple, easy-to-understand manner - Features illustrations that explain basic concepts and show comparison to analytical solutions and commercial simulators - Includes dozens of completed example problems on a small number of grid blocks - Offers pseudocode and exercises to allow the reader to develop their own computer-based numerical simulator that can be verified against analytical solutions and commercial simulators
Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2005-03-30 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades, advances in modeling flow, heat, and mass transfer through a porous medium have dramatically transformed engineering applications. Comprehensive and cohesive, Handbook of Porous Media, Second Edition presents a compilation of research related to heat and mass transfer including the development of practical applications
Download or read book Mathematical Modeling of Fluid Flow and Heat Transfer in Petroleum Industries and Geothermal Applications written by Mehrdad Massoudi and published by MDPI. This book was released on 2020-04-16 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal energy is the thermal energy generated and stored in the Earth's core, mantle, and crust. Geothermal technologies are used to generate electricity and to heat and cool buildings. To develop accurate models for heat and mass transfer applications involving fluid flow in geothermal applications or reservoir engineering and petroleum industries, a basic knowledge of the rheological and transport properties of the materials involved (drilling fluid, rock properties, etc.)—especially in high-temperature and high-pressure environments—are needed. This Special Issue considers all aspects of fluid flow and heat transfer in geothermal applications, including the ground heat exchanger, conduction and convection in porous media. The emphasis here is on mathematical and computational aspects of fluid flow in conventional and unconventional reservoirs, geothermal engineering, fluid flow, and heat transfer in drilling engineering and enhanced oil recovery (hydraulic fracturing, CO2 injection, etc.) applications.
Download or read book Proceedings of the 8th International Congress on Environmental Geotechnics Volume 2 written by Liangtong Zhan and published by Springer. This book was released on 2018-10-10 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third volume of the proceedings of the 8th International Congress on Environmental Geotechnics (ICEG 2018), held on October 28 - November 1, 2018 in Hangzhou, China. The theme of the congress is “Towards a Sustainable Geoenvironment”, which means meeting the needs of the present generation without compromising the ability of future generations to meet their own needs. Under this theme, the congress covers a broad range of topics and provides an excellent opportunity for academics, engineers, scientists, government officials, regulators, and planners to present, discuss and exchange notes on the latest advances and developments in the research and application of environmental geotechnics.
Download or read book Reservoir Simulations written by Shuyu Sun and published by Gulf Professional Publishing. This book was released on 2020-06-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Simulation: Machine Learning and Modeling helps the engineer step into the current and most popular advances in reservoir simulation, learning from current experiments and speeding up potential collaboration opportunities in research and technology. This reference explains common terminology, concepts, and equations through multiple figures and rigorous derivations, better preparing the engineer for the next step forward in a modeling project and avoid repeating existing progress. Well-designed exercises, case studies and numerical examples give the engineer a faster start on advancing their own cases. Both computational methods and engineering cases are explained, bridging the opportunities between computational science and petroleum engineering. This book delivers a critical reference for today's petroleum and reservoir engineer to optimize more complex developments. - Understand commonly used and recent progress on definitions, models, and solution methods used in reservoir simulation - World leading modeling and algorithms to study flow and transport behaviors in reservoirs, as well as the application of machine learning - Gain practical knowledge with hand-on trainings on modeling and simulation through well designed case studies and numerical examples.
Download or read book Upscaling Multiphase Flow in Porous Media written by D.B. Das and published by Springer Science & Business Media. This book was released on 2005-06-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides concise, up-to-date and easy-to-follow information on certain aspects of an ever important research area: multiphase flow in porous media. This flow type is of great significance in many petroleum and environmental engineering problems, such as in secondary and tertiary oil recovery, subsurface remediation and CO2 sequestration. This book contains a collection of selected papers (all refereed) from a number of well-known experts on multiphase flow. The papers describe both recent and state-of-the-art modeling and experimental techniques for study of multiphase flow phenomena in porous media. Specifically, the book analyses three advanced topics: upscaling, pore-scale modeling, and dynamic effects in multiphase flow in porous media. This will be an invaluable reference for the development of new theories and computer-based modeling techniques for solving realistic multiphase flow problems. Part of this book has already been published in a journal. Audience This book will be of interest to academics, researchers and consultants working in the area of flow in porous media.
Download or read book Gas Particle and Granular Flow Systems written by Nan Gui and published by Elsevier. This book was released on 2019-10-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Particle and Granular Flow Systems: Coupled Numerical Methods and Applications breaks down complexities, details numerical methods (including basic theory, modeling and techniques in programming), and provides researchers with an introduction and starting point to each of the disciplines involved. As the modeling of gas-particle and granular flow systems is an emerging interdisciplinary field of study involving mathematics, numerical methods, computational science, and mechanical, chemical and nuclear engineering, this book provides an ideal resource for new researchers who are often intimidated by the complexities of fluid-particle, particle-particle, and particle-wall interactions in many disciplines. - Presents the most recent advances in modeling of gas-particle and granular flow systems - Features detailed and multidisciplinary case studies at the conclusion of each chapter to underscore key concepts - Discusses coupled methods of particle and granular flow systems theory and includes advanced modeling tools and numerical techniques
Download or read book Applied Mechanics and Civil Engineering VI written by Liquan Xie and published by CRC Press. This book was released on 2017-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Mechanics and Civil Engineering VI includes the contributions to the 6th International Conference on Applied Mechanics and Civil Engineering (AMCE 2016, Hong kong, China, 30-31 December 2016), and showcases the challenging developments in the areas of applied mechanics, civil engineering and associated engineering practice. The book covers a wide variety of topics: - Applied mechanics and its applications in civil engineering; - Bridge engineering; - Underground engineering; - Structural safety and reliability; - Reinforced concrete (RC) structures; - Rock mechanics and rock engineering; - Geotechnical in-situ testing & monitoring; - New construction materials and applications; - Computational mechanics; - Natural hazards and risk, and - Water and hydraulic engineering. Applied Mechanics and Civil Engineering VI will appeal to professionals and academics involved in the above mentioned areas, and it is expected that the book will stimulate new ideas, methods and applications in ongoing civil engineering advances.
Download or read book Parallel Computing Accelerating Computational Science and Engineering CSE written by M. Bader and published by IOS Press. This book was released on 2014-03-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computing has been the enabling technology of high-end machines for many years. Now, it has finally become the ubiquitous key to the efficient use of any kind of multi-processor computer architecture, from smart phones, tablets, embedded systems and cloud computing up to exascale computers. _x000D_ This book presents the proceedings of ParCo2013 – the latest edition of the biennial International Conference on Parallel Computing – held from 10 to 13 September 2013, in Garching, Germany. The conference focused on several key parallel computing areas. Themes included parallel programming models for multi- and manycore CPUs, GPUs, FPGAs and heterogeneous platforms, the performance engineering processes that must be adapted to efficiently use these new and innovative platforms, novel numerical algorithms and approaches to large-scale simulations of problems in science and engineering._x000D_ The conference programme also included twelve mini-symposia (including an industry session and a special PhD Symposium), which comprehensively represented and intensified the discussion of current hot topics in high performance and parallel computing. These special sessions covered large-scale supercomputing, novel challenges arising from parallel architectures (multi-/manycore, heterogeneous platforms, FPGAs), multi-level algorithms as well as multi-scale, multi-physics and multi-dimensional problems._x000D_ It is clear that parallel computing – including the processing of large data sets (“Big Data”) – will remain a persistent driver of research in all fields of innovative computing, which makes this book relevant to all those with an interest in this field.
Download or read book Lattice Gas Cellular Automata and Lattice Boltzmann Models written by Dieter A. Wolf-Gladrow and published by Springer. This book was released on 2004-10-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lattice-gas cellular automata (LGCA) and lattice Boltzmann models (LBM) are relatively new and promising methods for the numerical solution of nonlinear partial differential equations. The book provides an introduction for graduate students and researchers. Working knowledge of calculus is required and experience in PDEs and fluid dynamics is recommended. Some peculiarities of cellular automata are outlined in Chapter 2. The properties of various LGCA and special coding techniques are discussed in Chapter 3. Concepts from statistical mechanics (Chapter 4) provide the necessary theoretical background for LGCA and LBM. The properties of lattice Boltzmann models and a method for their construction are presented in Chapter 5.
Download or read book Advanced HPC based Computational Modeling in Biomechanics and Systems Biology written by Mariano Vázquez and published by Frontiers Media SA. This book was released on 2019-04-04 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Lattice Boltzmann Method And Its Application In Engineering written by Zhaoli Guo and published by World Scientific. This book was released on 2013-03-25 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lattice Boltzmann method (LBM) is a relatively new simulation technique for the modeling of complex fluid systems and has attracted interest from researchers in computational physics. Unlike the traditional CFD methods, which solve the conservation equations of macroscopic properties (i.e., mass, momentum, and energy) numerically, LBM models the fluid consisting of fictive particles, and such particles perform consecutive propagation and collision processes over a discrete lattice mesh.This book will cover the fundamental and practical application of LBM. The first part of the book consists of three chapters starting form the theory of LBM, basic models, initial and boundary conditions, theoretical analysis, to improved models. The second part of the book consists of six chapters, address applications of LBM in various aspects of computational fluid dynamic engineering, covering areas, such as thermo-hydrodynamics, compressible flows, multicomponent/multiphase flows, microscale flows, flows in porous media, turbulent flows, and suspensions.With these coverage LBM, the book intended to promote its applications, instead of the traditional computational fluid dynamic method.
Download or read book Process Analysis Design and Intensification in Microfluidics and Chemical Engineering written by Santana, Harrson Silva and published by IGI Global. This book was released on 2019-01-18 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics represent great potential for chemical processes design, development, optimization, and chemical engineering bolsters the project design of industrial processes often found in large chemical plants. Together, microfluidics and chemical engineering can lead to a more complete and comprehensive process. Process Analysis, Design, and Intensification in Microfluidics and Chemical Engineering provides emerging research exploring the theoretical and practical aspects of microfluidics and its application in chemical engineering with the intention of building pathways for new processes and product developments in industrial areas. Featuring coverage on a broad range of topics such as design techniques, hydrodynamics, and numerical modelling, this book is ideally designed for engineers, chemists, microfluidics and chemical engineering companies, academicians, researchers, and students.
