Download or read book Cesium Removal Demonstration Utilizing Crystalline Silicotitanate Sorbent for Processing Melton Valley Storage Tank Supernate written by and published by . This book was released on 1998 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides details of the Cesium Removal Demonstration (CsRD), which was conducted at Oak Ridge National Laboratory (ORNL) on radioactive waste from the Melton Valley Storage Tanks. The CsRD was the first large-scale use of state-of-the-art sorbents being developed by private industry for the selective removal of cesium and other radionuclides from liquid wastes stored across the DOE complex. The crystalline silicotitanate sorbent used in the demonstration was chosen because of its effectiveness in laboratory tests using bench-scale columns. The demonstration showed that the cesium could be removed from the supernate and concentrated on a small-volume, solid waste form that would meet the waste acceptance criteria for the Nevada Test Site. During this project, the CsRD system processed> 115,000 L (30,000 gal) of radioactive supernate with minimal operational problems. Sluicing, drying, and remote transportation of the sorbent, which could not be done on a bench scale, were successfully demonstrated. The system was then decontaminated to the extent that it could be contact maintained with the use of localized shielding only. By utilizing a modular, transportable design and placement within existing facilities, the system can be transferred to different sites for reuse. The initial unit has now been removed from the process building and is presently being reinstalled for use in baseline operations at ORNL.
Download or read book Cesium Removal Using Crystalline Silicotitanate Innovative Technology Summary Report written by and published by . This book was released on 1999 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately 100 million gallons of radioactive waste is stored in underground storage tanks at the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation, and Savannah River Site (SRS). Most of the radioactivity comes from 137Cs, which emits high-activity gamma radiation. The Cesium Removal System is a modular, transportable, ion-exchange system configured as a compact processing unit. Liquid tank waste flows through columns packed with solid material, called a sorbent, that selectively adsorbs cesium and allows the other materials to pass through. The sorbent is crystalline silicotitanate (CST), an engineered material with a high capacity for sorbing cesium from alkaline wastes. The Cesium Removal System was demonstrated at Oak Ridge using Melton Valley Storage Tank (MVST) waste for feed. Demonstration operations began in September 1996 and were completed during June 1997. Prior to the demonstration, a number of ion-exchange materials were evaluated at Oak Ridge with MVST waste. Also, three ion-exchange materials and three waste types were tested at Hanford. These bench-scale tests were conducted in a hot cell. Hanford's results showed that 300 times less sorbent was used by selecting Ionsiv IE-911 over organic ion-exchange resins for cesium removal. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues and lessons learned.
Download or read book The Office of Environmental Management Technical Reports A Bibliography written by and published by DIANE Publishing. This book was released on 2001 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Environmental Management's (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1994 through June 30, 1995. This information is divided into the following categories: Focus Areas, Cross-Cutting Programs, and Support Programs. In addition, a category for general information is included. EM's Office of Science and Technology sponsors this bibliography.
Download or read book Engineering Separations Unit Operations for Nuclear Processing written by Reid Peterson and published by CRC Press. This book was released on 2019-11-15 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Separations Unit Operations for Nuclear Processing provides insight into the fundamentals of separations in nuclear materials processing not covered in typical texts. This book integrates fuel cycle and waste processing into a single, coherent approach, demonstrating that the principles from one field can and should be applied to the other. It provides historical perspectives on nuclear materials processing, current assessment and challenges, and how past challenges were overcome. It also provides understanding of the engineering principles associated with handling nuclear materials. This book is aimed at researchers, graduate students, and professionals in the fields of chemical engineering, mechanical engineering, nuclear engineering, and materials engineering.
Download or read book Ijj n m be sifr t hat talm d written by Ezra Zion Melamed and published by . This book was released on 1986 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Alternatives Report for the Cesium Removal Demonstration written by and published by . This book was released on 1995 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cesium Removal Demonstration (CRD) project will use liquid low-level waste (LLLW) stored in the Oak Ridge National Laboratory Melton Valley Storage Tanks to demonstrate cesium removal from sodium nitrate-based supernates. This report presents the results of a conceptual design study to scope the alternatives for conducting the demonstration at ORNL. Factors considered included (1) sorbent alternatives, (2) facility alternatives, (3) process alternatives, (4) process disposal alternatives, and (5) relative cost comparisons. Recommendations included (1) that design of the CRD system move forward based on information obtained to date from tests with Savannah River Resin, (2) that the CRD system be designed so it could use crystalline silicotitanates (CST) if an engineered form of CST becomes available prior to the CRD, (3) that the system be designed without the capability for resin regeneration, (4) that the LLLW solidification facility be used for the demonstration (5) that vitrification of the loaded resins from the CRD be demonstrated at the Savannah River Site, and (6) that permanent disposal of the loaded and/or vitrified resin at the Nevada Test Site be pursued.
Download or read book Proceedings of the International Conference on Decommissioning and Decontamination and on Nuclear and Hazardous Waste Management written by and published by . This book was released on 1998 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Demonstration of Proposed Commercial Cesium Removal Technology written by and published by . This book was released on 1997 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the work done in support of the development of technology for the continuous removal and concentration of radioactive cesium in supernatant from Melton Valley Storage Tanks (MVSTs) at the ORNL site. The primary objective was to test candidate absorbers and ion exchangers under continuous-flow conditions using actual supernatant from the MVSTs. An experimental system contained in a hot-cell facility was constructed to test the materials in columns or modules using the same batch of supernatant to allow comparison on an equal basis. Resorcinol/formaldehyde (RF) resin was evaluated at three flow rates with 50% breakthrough ranges of 35 to 50 column volumes (CV) and also through a series of five loading/elution/regeneration cycles. The results reported here include the cesium loading breakthrough curves, elution curves (when applicable), and operational problems and observations for each material. The comparative evaluations should provide critical data for the selection of the sorbent for the ORNL Cesium Removal Demonstration project. These results will be used to help determine the design parameters for demonstration-scale systems. Such parameters include rates of cesium removal, quantity of resin or sorbent to be used, and elution and regeneration requirements, if applicable.
Download or read book Thermal and Chemical Stability of Crystalline Silicotitanate Sorbent written by and published by . This book was released on 2000 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Savannah River Site (SRS) is evaluating technologies for removing radioactive cesium (137Cs) from the supernate solutions stored in the high-level waste tanks at the site. Crystalline silicotitanate sorbent (IONSIV IE-911,{reg_sign} UOP LLC, Des Plaines, IL), which is very effective at removing cesium from high-salt solution, is one of three technologies currently being tested. Because of the extremely high inventory of 137Cs expected for the large columns of crystalline silicotitanate (CST) that would be used for treating the SRS supernate, any loss of flow or cooling to the columns could result in high temperatures from radiolytic heating. Also, even for normal operation, the CST would be exposed to the supernates for up to a year before being removed. Small-scale tests using simulant solutions were used to determine the long-term stability of the CST to the solutions at various temperatures. In the tests performed in this study, the cesium capacity of the CST decreased significantly (76%) as the temperature of the simulant and CST during loading was increased from 23 to 80 C. CST exposed to recirculating SRS average simulant solution at room temperature in a column test showed a slow decrease in cesium loading capacity (measured at 23 C), with a drop of 30% for CST from the top of the bed and 13% for CST from the bottom of the bed after a 12-month period of exposure. A similar column test using a high-pH salt solution did not show any change in the cesium capacity of the CST. An increase was noted in pressure drop through the column using average simulant, but no change was observed for the column using high-pH salt solution.
Download or read book Performance of Crystalline Silicotitanates for Cesium Removal from Hanford Tank Waste Simulants written by and published by . This book was released on 1994 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new class of inorganic ion exchangers, called crystalline silicotitanates (CSTs), has been prepared at Sandia National Laboratories and Texas A & M University. CSTs have been determined to have high selectivity for the adsorption of Cs and Sr, and several other radionuclides from highly alkaline, high-sodium supernate solutions such as those found at Westinghouse Hanford (WHC). Continuous flow, ion-exchange columns are expected to be used to remove Cs and other radionuclides from the Hanford tank supernate. The proposed application for the CST would be Cs removal from highly alkaline salt solutions in a single pass process with interim storage of the Cs loaded CST until the glass vitrification plant is operational. This paper presents test results which address material requirements relevant for Hanford radwaste processing. This paper also discusses the integrated experimental and modeling approach being developed to establish the performance of the CST materials for the range of solution compositions and processing conditions which are expected to occur. The status on the commercialization of the CST material is also discussed.
Download or read book Test Procedures and Instructions for Hanford Tank Waste Supernatant Cesium Removal written by and published by . This book was released on 1996 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test using Hanford Double-Shell Slurry Feed supernatant liquor from tank 251-AW-101 in a bench-scale column. Cesium sorbents to be tested include resorcinol-formaldehyde resin and crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-022, Hanford Tank Waste Supernatant Cesium Removal Test Plan.
Download or read book Vitrification of Cesium loaded Crystalline Silicotitanate CST in the Shielded Cells Melter written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Through the Tanks Focus Area, the Savannah River Technology Center (SRTC) and the Oak Ridge National Laboratory participated in a joint project in which supernate waste from the Melton Valley Storage Tanks at Oak Ridge was treated by passage through a crystalline silicotitanate (CST) ion exchange column. CST was designed to sorb Cs- 137, Sr-90 and several other radionuclides from highly alkaline solutions containing large quantities of sodium. 2 After demonstrating the effectiveness of CST as an ion exchange medium, ORNL shipped some of the loaded sorbent to SRTC where it was mixed with glass formers and processed in a joule-heated melter within the SRTC Shielded Cells. This report details the results of the melter run, along with the preparations that were required to complete the campaign.
Download or read book Test Procedures and Instructions for Single Shell Tank Saltcake Cesium Removal with Crystalline Silicotitanate written by and published by . This book was released on 1997 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test, using Hanford Single Shell Tank Saltcake from tanks 24 t -BY- I 10, 24 1 -U- 108, 24 1 -U- 109, 24 1 -A- I 0 1, and 24 t - S-102, in a bench-scale column. The cesium sorbent to be tested is crystalline siticotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-024, Hanford Single Shell Tank Saltcake Cesium Removal Test Plan.
Download or read book Proceedings of the International Conference on Decommissioning and Decontamination and on Nuclear and Hazardous Waste Management written by American Nuclear Society and published by . This book was released on 1998 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book COMPARISONS OF CRYSTALLINE SILICOTITANATE AND RESORCINOL FORMALDEHYDE MEDIA FOR CESIUM REMOVAL BY IN TANK COLUMN PROCESSING written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical and thermal performance of crystalline silicotitanate (CST) and resorcinol-formaldehyde (RF) ion exchange media were predicted for column configurations designed for installation in high level waste tanks and intended for cesium removal from radioactive waste supernates. Modeling predictions for the processing of a known Savannah River Site tank waste composition were generated. In a two column configuration under presumed nominal operating conditions (432 gallon packed bed, 10 gpm liquid flow, 25 C, 45 nCi/g average breakthrough limit) with lead/lag column rotation between processing cycles, approximately two cycles were predicted to treat 1,000,000 gallons of radioactive waste with CST as compared to three cycles predicted for RF. However, this processing mode was shown to be highly unfavorable for RF due to the fact that the lead column is unnecessarily exposed to large radiation doses during movement of the cesium mass transfer zone into the lag column. Thermal modeling calculations indicated that maximum temperatures within stagnant, packed CST and RF columns containing the highest anticipated cesium loading and no active cooling will reach 128 and 78 C, respectively, within 6 days. Active cooling maintains the cesium-saturated CST and RF columns below 88 and 41 C, respectively, under stagnant flow conditions.
Download or read book Test Procedures and Instructions for Hanford Complexant Concentrate Supernatant Cesium Removal Using CST written by and published by . This book was released on 1997 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test, using Hanford Complexant Concentrate supernatant liquor from tank 241-AN-107, in a bench-scale column. The cesium sorbent to be tested is crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-023, Hanford Complexant Concentrate Supernatant Cesium Removal Test Plan.
