Download or read book Fundamentals of Ceramic Powder Processing and Synthesis written by Terry A. Ring and published by Elsevier. This book was released on 1996-04-30 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic powder synthesis and processing are two of the most important technologies in chemical engineering and the ceramics-related area of materials science. This book covers both the processing and the synthesis ofceramic powders in great depth and is indeed the only up-to-date, comprehensive source on the subject available.The application of modern scientific and engineering methods to the field of ceramic powder synthesis has resulted in much greater control of properties. Fundamentals of Ceramic Powder Processing and Synthesis presents examples of these modern methods as they apply to ceramic powders. The book is organized to describe the natural and synthetic raw materials that comprise contemporary ceramics. It covers the three reactant processes used in synthetic ceramic powder synthesis: solid, liquid, andgas.Ceramic powder processing, as a field of materials processing, is undergoing rapid expansion. The present volume is intended as a complete and useful source on this subject of great current interest. It provides comprehensive coverage from a strong chemistry and chemical engineering perspective and is especially applicable to materials scientists, chemical engineers, and applied chemists.Key Features* The most complete and updated reference source on the subject* Comprehensive coverage from a stron chemical engineering and chemistry perspective* Emphasis on both natural and synthetic raw materials in ceramic powder synthesis* Information on reaction kinetics* Superior, more comprehensive coverage than that in existing texts* Sample problems and exercises* Problems at the end of each chapter which supplement the material

Download or read book Ceramic Processing written by Mohamed Rahaman and published by CRC Press. This book was released on 2006-08-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Chemical Processing of Ceramics written by Burtrand Lee and published by CRC Press. This book was released on 2005-07-15 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many believe that the silicon/information age is heading to the Age of Biology and that the next frontier in ceramics will most likely require molecular level or nanoscale control. What, then, is the role of ceramics in the age of biology? As we change from an energy-rich society to an energy-declining society, how can ceramic materials appease the

Download or read book Organic Additives and Ceramic Processing written by Daniel J. Shanefield and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.

Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Science of Ceramic Chemical Processing written by Larry L. Hench and published by Wiley-Interscience. This book was released on 1986 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of producing ceramic, glass, and composite materials using chemistry-based processing methods. Synthesizes the most up-to-date research. Includes new areas of computer aided processing, molecular calculations of ceramic processing reactions, and chemical control of surface films. Contributions from over 115 experts in the field. Index.

Download or read book Ceramic Fabrication Technology written by Roy W. Rice and published by CRC Press. This book was released on 2002-11-08 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between textbook science and real-world engineering and operational applications, this reference presents comprehensive and easy-to-follow summaries and evaluations of fabrication techniques for ceramic and ceramic composite specimens and components. The author addresses both conventional and alternative powder-based fabrication, chemical vapor deposition, melt processing, and reaction processing. Topics include the preparation of ceramic powders, plastic forming, colloidal processing, the use of additives to aid densification, hot pressing, the fabrication of filaments for reinforcement, rapid prototyping, and gaseous impurities.

Download or read book Nanocrystalline Ceramics written by Markus Winterer and published by Springer Science & Business Media. This book was released on 2002-08-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystalline materials is the name given to three-dimensional ultrafine, polycrystalline microstructures. These microstructures give rise to chemical and physical size effects which are of increasing scientific and technological interest. This book describes the development of a chemical vapor synthesis method for the production of nanocrystalline ceramic powders. The development of the microstructure during sintering is studied and the influence of the synthesis parameters on the structure and properties of the nanocrystalline ceramics from the atomic to the microstructural level is investigated. The emerging unified view, from powder synthesis and ceramic processing to structural characterization and determination of properties, provides a detailed understanding of nanocrystalline materials and enables a precise control of the quality of the final products.

Download or read book Science of Sintering written by H. Palmour III and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, SCIENCE OF SINTERING: NEW DIRECTIONS FOR MATERIALS PROCESSING AND MICROSTRUCTURAL CONTROL, contains the edited Proceedings of the Seventh World Round Table Conference on Sintering, held in Herceg-Novi, Yugoslavia, Aug. 28 - Sept. 1, 1989. It was organized by the International Institute for the Science of Sintering (IISS), headquartered in Belgrade, Yugoslavia. Every fourth year since 1969, the Institute has organized such a Round Table Conference on Sintering; each has taken place at some selected location within Yugoslavia. A separate series of IISS Topical Sintering Symposia (Summer Schools) have also been held at four year intervals, but they have been offset by about two years, so they occur between the main Conferences. As a rule, the Topical Sintering Symposia have been devoted to more specific topics and they also take place in different countries. The aim of these Conferences and their related "Summer Schools" has been to bring together scientists from all over the world who work in various fields of science and technology concerned with sintering and sintered materials. A total of seven IISS Conferences have been held over the period 1969-1989, and they have been supplemented by the four Topical Sintering Symposia held in Yugoslavia, Poland, India and Japan (in 1975, 1979, 1983 and 1987, respectively). This most recent five day Conference addressed the fundamental scientific background as well as the technological state-of-the-art pertinent to science of sintering and high technology sintered materials.

Download or read book Ceramic Powder Preparation A Handbook written by Dibyendu Ganguli and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3. 1 Techniques of Comminution 35 3. 2 Solid-Solid Reactions 42 3. 2. 1 Mixing and Calcination 42 3. 2. 2 Modem Techniques 45 3. 3 Solution Techniques 46 3. 3. 1 Precipitation and Co-precipitation 46 Forced Hydrolysis 3. 3. 2 49 3. 3. 3 Hydrotbennal Synthesis 51 The Sol-Gel Process 3. 3. 4 53 3. 3. 5 Hydrolysis of Metal-Organics 56 The Emulsion Process 3. 3. 6 56 Solvent Vaporization 3. 4 59 3. 4. 1 Simple Evaporation 59 3. 4. 2 Spray Drying 60 3. 4. 3 Spray Pyrolysis 64 3. 4. 4 Freeze Drying 66 3. 5 Vapour-Phase Techniques 68 3. 5. 1 Vaporization-Condensation 68 3. 5. 2 Vapour-Vapour Reaction 68 3. 5. 3 Vapour-Liquid Reaction 70 3. 5. 4 Vapour-Solid Reaction 71 3. 6 Precursor Decomposition 72 3. 6. 1 Salt Decomposition 72 3. 6. 2 Polymer Pyrolysis 73 4. Synthetic Powders : Options in Preparation 75 4. 0 Introduction 75 4. 1 Single and Multiple Oxide Powders 75 4. 1. 1 Aluminium Oxide 75 4. 1. 2 Zirconium Oxide 85 4. 1. 3 Titanium Oxide 96 4. 1. 4 Magnesium Oxide 99 4. 1. 5 Silicon Dioxide 101 4. 1. 6 Rare Earth Oxides 105 Yttrium Oxide 105 Cerium Oxide 106 4. 1. 7 Zinc Oxide 107 [vi] 4. 1. 8 Mullite 110 4. 1. 9 Magnesium Aluminate Spinel 114 4. 1.

Download or read book Ceramic Processing written by R.A. Terpstra and published by Springer Science & Business Media. This book was released on 1995-07-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.

Download or read book Materials Processing written by Lorraine F. Francis and published by Elsevier. This book was released on 2024-04-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing: A Unified Approach to Processing of Metals, Ceramics and Polymers, Second Edition is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. This fully updated edition includes expanded coverage on additive manufacturing, as well as adding a new section on machining. The organization has been modified and a greater emphasis has been placed on the fundamentals of processing and manufacturing methods. This book can be utilized by upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. - Includes comprehensive coverage on the fundamental concepts of materials processing - Provides coverage of metals, ceramics, and polymers in one text - Presents examples of both standard and newer additive manufacturing methods throughout - Gives students an overview on the methods that they will likely encounter in their careers

Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.

Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.

Download or read book Materials Chemistry of Ceramics written by Junichi Hojo and published by Springer Nature. This book was released on 2019-11-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides fundamental knowledge of ceramics science and technology in a compact volume. Based on inorganic chemistry, it is intended as a reader for graduate students and young researchers beginning work in ceramics. The importance of the book is that it provides a scientific understanding of structure, properties, and processing from the chemical aspect, leading to creation of future ceramics. Ceramics have high hardness, strength, thermal and chemical stability, as well as various electromagnetic functions. To take full advantage of ceramics, their use has been advanced to engineering and electronic ceramics. Most ceramics have been fabricated by powder processing, and new technologies have also evolved such as CVD and sol-gel methods: new ceramics aimed at new functions of highly pure oxides and artificial nitrides, carbides, and borides; fine ceramics focused on precise control of composition and microstructure; and design of unique morphology, such as nanoparticles, nanofibers, nanosheets, mesoporous materials, and hybrids. Materials are composed of atoms and molecules. They are assembled into crystals and are amorphous, leading to 3-D micro/nano structures. In addition to the topics described above, this book shows the importance of chemistry for materials design at the nanometer scale, and that chemistry develops new fields of environment, energy, informatics, biomaterials, and other areas.

Download or read book Ceramic Materials written by Dolores Eliche Quesada and published by BoD – Books on Demand. This book was released on 2019-03-20 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific and technological development has led to the formulation of tailor-made materials, which have given rise to materials with new structural and industrial applications. This book aims to analyze the synthesis, characterization, and applications of ceramic materials. This includes an introduction to traditional and advanced ceramics, the use of traditional ceramic materials as ideal candidates for absorbing wastes, and the synthesis and characterization of advanced ceramics as nanoceramics, ytria ceramics, and electronic ceramics.