Download or read book Ceramic Filters for Hot Gas Filtration written by DeWayne Edward Howell (II.) and published by . This book was released on 1999 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Filters for Hot Gas Filtration written by D. E. Howell and published by . This book was released on 1995 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Filters for Removal of Particulates from Hot Gas Streams written by and published by . This book was released on 1992 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal is to demonstrate the performance of a new ceramic filter in removing particulate matter from hot gas streams produced in advanced coal conversion processes. The specific objectives are threefold: (1) Development of full size ceramic filters suitable for hot gas filtration; (2) Demonstration of ceramic filters in long term (ca. 1000 hrs) field trials; and (3) Development of full-scale hot gas filter system designs and costs. To date, field tests of the ceramic filter for particulate removal have been conducted at seven sites on a variety of gas streams and under a variety of test conditions. In general, the following performance characteristics have been observed: 1. Filtration face velocity (equivalent to an ''air to cloth ratio'') for flue gas tests is comparable to that for pulse jet bags operating at the same pressure drop. In hot gas tests, flow-pressure drop characteristics have been observed to be comparable to those for other ceramic filters. 2. Complete regeneration by a simple backpulse technique is achieved; i.e., no increase in clean filter resistance over repetitive cycles is observed. 3. No plugging of the filter passageways by badly caking particulates is observed. 4. Essentially complete particulate removal, including submicron particulate matter, is achieved.
Download or read book Hot Gas Particulate Filtration written by Stuart C. Mitchell and published by . This book was released on 1997 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alinoeddin Enda Boemi written by and published by . This book was released on 1925 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Hot Gas Filter with Integrated Failsafe System written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to integrate a failsafe system and to improve the cleaning intensity a new cleaning method was recently developed, the CPP (coupled pressure pulse) cleaning (Heidenreich et al. 2001). For the CPP method the cleaning system is directly coupled with the filter candles. One feature of this new technique is that the cleaning gas pressure exceeds the system pressure only by 0.05 to 0.1 MPa, whereas in case of conventional jet pulse systems two times the system pressure (at least 0.6 MPa) is standard. The key advantage of the coupled pressure pulse cleaning is that a safety filter for each filter candle can be integrated in the clean gas side of the filter. Thus, a candle failure is not longer a serious problem. The integrated safety filter enables the operation of the filter system also in case a filter candle breaks. This increases the availability of the filter and prevents an unscheduled costly shut-down of the system. In this paper the design of the ceramic filter wit h the failsafe system and the CPP cleaning will be described. The new developed safety filter elements, their pressure drop and their filtration and clogging behavior will be shown. Tests of single system components, of the whole filter system and first experiences of operating this system will be reported.
Download or read book Ceramic Hot gas Filter written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.
Download or read book Ceramic Filter Elements for High Pressure Temperature Gas Filtration written by E. K. Reinhardt and published by . This book was released on 1986 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Fibers for Filtering Dust from Hot Gases written by Leslie J. Kane and published by . This book was released on 1960 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluating Ceramic Filter Media on a Slipstream of Hot Flue Gas written by and published by . This book was released on 1994 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for more efficient systems for generating electric power from coal has led to a number of new technological developments, including such processes as pressurized fluidized-bed combustion (PFBC) and integrated gasification combined-cycle (IGCC) systems. To achieve maximum efficiency, a common and critical requirement for these technologies is a method for removing suspended particulate matter from the gas stream at high temperatures (above 1000 F) and high pressures (greater than 10 bar). The US Department of Energy's Morgantown Energy Technology Center (METC) is pursuing the development of such hot gas cleanup methods through an extensive program of fundamental and pilot studies in cooperation with utilities, supporting industries, and other research organizations. As a part of this program, Southern Research Institute (SRI) is carrying out a series of studies using a high-temperature sidestream device for performing long-duration tests on small specimens (patches) of filter materials on a process gas stream from an atmospheric-pressure fluidized-bed combuster. SRI developed an apparatus and a test plan to accomplish three of METC's objectives: (1) to determine the effects on ceramic filters of long-term filtration of particle-laden flue gases at high temperatures, (2) to compare the filtration performance of several kinds of filters, and (3) to simulate the Plant Tidd ash loading on filters so that results from these tests could be used to help select filters for use at the Tidd 10 MW pilot-scale facility. Preliminary results are discussed.
Download or read book Development of Metallic Filters for Hot Gas Cleanup in Pressurized Fluidized Bed Combustion Applications written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative alloys derived from the wide array of aerospace superalloys will be developed for hot gas filtration to improve on both ceramic filters and ''first-generation'' iron aluminide metallic filter materials. New high performance metallic filters should offer the benefits of non-brittle mechanical behavior at all temperatures, including ambient temperature, and improved resistance to thermal fatigue compared to ceramic filter elements, thus improving filter reliability. A new powder processing approach also will be established that results in lightweight metallic filters with high permeability and weldability for enhanced capability for filter system manufacturing.
Download or read book Experiences Using Rigid Ceramic Filter Elements for Hot Gas Dust Filtration written by Michael Durst and published by . This book was released on 1992 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process for Making Ceramic Hot Gas Filter written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.
Download or read book 3 D Woven Ceramic Composite Hot Gas Filter Development written by and published by . This book was released on 1998 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Westinghouse, with Techniweave as a major subcontractor, is conducting a three-phase program aimed at providing advanced candle filters for a 1997 pilot-scale demonstration in one of the two hot- gas filter systems at Southern Company Service's Wilsonville PSD Facility. The Base Program (Phases I and 11) goal is to develop and demonstrate the suitability of the Westinghouse/ Techniweave next- generation, composite, candle filter for use in Pressurized Fluidized- Bed Combustion (PFBC) and/or Integrated Gasification Combined-Cycle (IGCC) power generation systems. The Optional Task (Phase 111, Task 5) objective is to fabricate, inspect, and ship to Wilsonville 50 advanced candle filters for pilot-scale testing.
Download or read book Development of Ceramic Composite Hot gas Filters written by and published by . This book was released on 1995 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel type of hot-gas filter based on a ceramic fiber-reinforced ceramic matrix was developed and extended to fullsize, 60-mm OD by 1.5-meter-long, candle filters. A commercially viable process for producing the filters was developed, and the filters are undergoing testing and demonstration throughout the world for applications in pressurized fluidized-bed combustion (PFBC) and integrated gasification combined cycle (IGCC) plants. Development activities at Oak Ridge National Laboratory (ORNL) and at the 3M Company, and testing at the Westinghouse Science and Technology Center (STC) are presented. Demonstration tests at the Tidd PFBC are underway. Issues identified during the testing and demonstration phases of the development are discussed. Resolution of the issues and the status of commercialization of the filters are described.
Download or read book Development of Simulation System for Hot Gas Filtration by Ceramic Candle Filters on High Temperature and written by and published by . This book was released on 2002 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot gas filtration from industrial processes offers various advantages in terms of improvement of process efficiencies, heat recovery and protection of plant installation. Especially hot gas filtration is an essential technology for pressurized fluidized bed combustion (PFBC) and integrated gasification combined cycle (IGCC).
