Download or read book Ceramic Films and Coatings written by J. B. Wachtman and published by William Andrew. This book was released on 1993-12-31 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive overview of the major important areas of ceramic thin films and coatings. Twenty-one widely respected researchers survey the range of applications of ceramic films and coatings and the techniques used to prepare and characterize them. The book is directed toward potential users of the technology and will also provide a broad update for experts in the field. Ceramic films and coatings are active fields of research and widely used areas of technology. The relatively high hardness and inertness of ceramic materials make ceramic coatings of interest for protection of substrate materials against corrosion, oxidation and wear resistance. The electronic and optical properties of ceramics make these films and coatings important to many electronic and optical devices. The book presents a series of reviews of many of the most active and technically important areas of ceramic films and coatings. It is introduced by an overview of the uses and methods of preparation of ceramic films and coatings. Topics then surveyed include synthetic diamond thin films, high T(subscript c) superconducting films, sol-gel films, protective films for cutting tools, optical films, and electronic films. Also covered are recent advances in improving wear resistance by ion implantation, in providing corrosion resistance by enameling, and in providing thermal protection with plasma sprayed coatings. Major characterization techniques and their capabilities and limitations are also treated.
Download or read book Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2015-07-29 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films and Coatings: Toughening and Toughness Characterization captures the latest developments in the toughening of hard coatings and in the measurement of the toughness of thin films and coatings. Featuring chapters contributed by experts from Australia, China, Czech Republic, Poland, Singapore, Spain, and the United Kingdom, this book: Presents the current status of hard-yet-tough ceramic coatings Reviews various toughness evaluation methods for films and hard coatings Explores the toughness and toughening mechanisms of porous thin films and laser-treated surfaces Examines adhesions of the film/substrate interface and the characterization of coating adhesion strength Discusses nanoindentation determination of fracture toughness, resistance to cracking, and sliding contact fracture phenomena Toughening and toughness measurement (of films and coatings) are two related, yet separate, fields of great importance in today’s nanotechnology world. Thin Films and Coatings: Toughening and Toughness Characterization is a timely reference written in such a way that novices will find it a stepping stone to the field and veterans will find it a rich source of information for their research.
Download or read book Thin Films and Coatings written by B. M. Caruta and published by Nova Publishers. This book was released on 2005 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad field of thin film technology is based first of all on the film growth processes in general. The concepts of crystal structure and defects in crystalline thin films such as grain boundaries, dislocations and vacancies are examined. The general nature of film growth from atoms equilibrating with the service, through the initial stages of growth to film coalescence and zone models is also within the scope of this book as are evaporation, sputter deposition and chemical vapour deposition. Thin films are widely used in microelectronics, chemistry and a wide array of related fields. This book offers new research in this exploding field.
Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
Download or read book Ceramic Thick Films for MEMS and Microdevices written by Robert A. Dorey and published by William Andrew. This book was released on 2011-10-21 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MEMS (Micro Electro-Mechanical Systems) market returned to growth in 2010. The total MEMS market is worth about $6.5 billion, up more than 11 percent from last year and nearly as high as its historic peak in 2007. MEMS devices are used across sectors as diverse as automotive, aerospace, medical, industrial process control, instrumentation and telecommunications - forming the nerve center of products including airbag crash sensors, pressure sensors, biosensors and ink jet printer heads. Part of the MEMS cluster within the Micro & Nano Technologies Series, this book covers the fabrication techniques and applications of thick film piezoelectric micro electromechanical systems (MEMS). It includes examples of applications where the piezoelectric thick films have been used, illustrating how the fabrication process relates to the properties and performance of the resulting device. Other topics include: top-down and bottom-up fabrication of thick film MEMS, integration of thick films with other materials, effect of microstructure on properties, device performance, etc. Provides detailed guidance on the fabrication techniques and applications of thick film MEMS, for engineers and R&D groups Written by a single author, this book provides a clear, coherently written guide to this important emerging technology Covers materials, fabrication and applications in one book
Download or read book Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2019-10-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances In Smart Coatings And Thin Films For Future Industrial and Biomedical Engineering Applications discusses in detail, the recent trends in designing, fabricating and manufacturing of smart coatings and thin films for future high-tech. industrial applications related to transportation, aerospace and biomedical engineering. Chapters cover fundamental aspects and diverse approaches used to fabricate smart self-healing anti-corrosion coatings, shape-memory coatings, polymeric and nano-bio-ceramic cotings, bio-inspired and stimuli-responsive coatings for smart surfaces with antibacterial activkity and controlled wettability, and electrically conductive coatings and their emerging applications. With the emphasis on advanced methodologies and recent emerging applications of smart multifunctional coatings and thin films, this book is essential reading for materials scientists and rsearchers working in chemical sciences, advanced materials, sensors, pharmaceutical and biomedical engineering. - Discusses the most recent advances and innovations in smart multifunctional coatings and thin films in the transportation, aerospace and biomedical engineering industries - Highlights the synthesis methods, processing, testing and characterization of smart coatings and thin films - Reviews the current prospects and future trends within the industry
Download or read book Thin Films and Coatings in Biology written by Soroush Nazarpour and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of materials is routinely exposed to various environmental influences. Surface modification presents a technological challenge for material scientists, physicists, and engineers, particularly when those surfaces are subjected to function within human body environment. This book provides a comprehensive coverage of the major issues and topics dealing with interaction of soft living matter with the surface of implants. Fundamental scientific concepts are embedded through experimental data and a broad range of case studies. First chapters cover the basics on biocompatibility of many different thin films of metals, alloys, ceramics, hydrogels, and polymers, following with case studies dealing with orthopedic and dental coatings. Next, a novel and low-cost coating deposition technique capable of production of several types of nanostructures is introduced through simple calculations and several illustrations. Moreover, chapter 6 and 7 present important topics on surface treatment of polymers, which is a subject that has seen many developments over the past decade. The last chapters target mainly the applications of coatings in biology such as in bio-sensing, neuroscience, and cancer detection. With several illustrations, micrographs, and case studies along with suitable references in each chapter, this book will be essential for graduate students and researchers in the multidisciplinary field of bio-coatings.
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2007-10-23 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, integrated text. Building on a foundation of crystal structures, phase equilibria, defects and the mechanical properties of ceramic materials, students are shown how these materials are processed for a broad diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text. The text concludes with discussions of ceramics in biology and medicine, ceramics as gemstones and the role of ceramics in the interplay between industry and the environment. Extensively illustrated, the text also includes questions for the student and recommendations for additional reading. KEY FEATURES: Combines the treatment of bioceramics, furnaces, glass, optics, pores, gemstones, and point defects in a single text Provides abundant examples and illustrations relating theory to practical applications Suitable for advanced undergraduate and graduate teaching and as a reference for researchers in materials science Written by established and successful teachers and authors with experience in both research and industry
Download or read book The Mechanics and Reliability of Films Multilayers and Coatings written by Matthew R. Begley and published by Cambridge University Press. This book was released on 2017-03-24 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of applications ranging from microelectronics to turbines for propulsion and power generation rely on films, coatings, and multilayers to improve performance. As such, the ability to predict coating failure - such as delamination (debonding), mud-cracking, blistering, crack kinking, and the like - is critical to component design and development. This work compiles and organizes decades of research that established the theoretical foundation for predicting such failure mechanisms, and clearly outlines the methodology needed to predict performance. Detailed coverage of cracking in multilayers is provided, with an emphasis on the role of differences in thermoelastic properties between the layers. The comprehensive theoretical foundation of the book is complemented by easy-to-use analysis codes designed to empower novices with the tools needed to simulate cracking; these codes enable not only precise quantitative reproduction of results presented graphically in the literature, but also the generation of new results for more complex multilayered systems.
Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.
Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments Volume 32 Issue 3 written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.
Download or read book Advanced Ceramic and Metallic Coating and Thin Film Materials for Energy and Environmental Applications written by Jing Zhang and published by Springer. This book was released on 2017-07-16 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent developments, perspectives on future research, and pertinent data from academia, industry, and government research laboratory to discuss fundamental mechanisms as well as processing and applications of advanced metallic and ceramic thin film and coating materials for energy and environmental applications. It is a platform to disseminate the latest research progress related to processing, characterization, and modelling. The authors address both thermal barrier and environmental coatings; magnetic and thermoelectric materials; and solar cell and solid oxide fuel cell materials. It is appropriate supplementary reading for students and primary reading for researchers in materials science and engineering.
Download or read book Chemical Solution Synthesis for Materials Design and Thin Film Device Applications written by Soumen Das and published by Elsevier. This book was released on 2021-01-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. - Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications - Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques - Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing
Download or read book Modern Technologies for Creating the Thin film Systems and Coatings written by Nikolay Nikitenkov and published by BoD – Books on Demand. This book was released on 2017-03-08 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of the thin film and coating technologies (TFCT) made possible the technological revolution in electronics and through it the revolution in IT and communications in the end of the twentieth century. Now, TFCT penetrated in many sectors of human life and industry: biology and medicine; nuclear, fusion, and hydrogen energy; protection against corrosion and hydrogen embrittlement; jet engine; space materials science; and many others. Currently, TFCT along with nanotechnologies is the most promising for the development of almost all industries. The 20 chapters of this book present the achievements of thin-film technology in many areas mentioned above but more than any other in medicine and biology and energy saving and energy efficiency.
