Download or read book Pile groups under cyclic lateral loading written by Christoph Niemann and published by BoD – Books on Demand. This book was released on 2020-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.

Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.

Download or read book Proceedings Fifteenth Annual Meeting of the Society of Engineering Science Inc December 4 5 6 1978 at Gainesville written by Society of Engineering Science and published by . This book was released on 1978 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Download or read book Design of Piles Under Cyclic Loading written by Alain Puech and published by John Wiley & Sons. This book was released on 2017-11-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.

Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.

Download or read book Analysis and Design of Pile Foundations written by Joseph Ray Meyer and published by . This book was released on 1984 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t

Download or read book Cyclic Behaviour of Soils and Liquefaction Phenomena written by Th. Triantafyllidis and published by CRC Press. This book was released on 2004-07-01 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference brought together specialists in cyclic soil behaviour in order to discuss important results and new ideas in the field, and to share expertise in design of various problems involving cyclic or dynamic behaviour of soils. This book covers a variety of topics: * Theory and analysis, including constitutive relations of soil under cyclic loading, post-seismic stability analysis of soil/structure, dynamic stability of structures, liquefaction analysis of marine structures due to cyclic loading, and more * Cyclic and dynamic laboratory and model testing, centrifuge testing and in-situ testing. * Numerical analysis, including computer methods * Design of industrial applications and marine structures, installation methods of piles, vibrocompaction, densification of ballast in railway structures, case studies of earthquakes and post-liquefaction observations.

Download or read book Mechanics of Materials and Interfaces written by Chandrakant S. Desai and published by CRC Press. This book was released on 2000-12-20 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disturbed state concept (DSC) is a unified, constitutive modelling approach for engineering materials that allows for elastic, plastic, and creep strains, microcracking and fracturing, stiffening or healing, all within a single, hierarchical framework. Its capabilities go well beyond other available material models yet lead to significant simpl

Download or read book Journal of the Geotechnical Engineering Division written by American Society of Civil Engineers. Geotechnical Engineering Division and published by . This book was released on 1981 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pile Foundation Analysis and Design written by H. G. Poulos and published by Krieger Publishing Company. This book was released on 1990-01-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Modelling in Geotechnics Two Volume Set written by Sarah Springman and published by CRC Press. This book was released on 2010-06-17 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions.Topics presented at the conference:Soil - Structure - Interaction;

Download or read book Earthquake Engineering and Soil Dynamics written by and published by . This book was released on 1978 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings Offshore Technology Conference written by and published by . This book was released on 1995 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Modelling in Geotechnics Two Volume Set written by C.W.W. Ng and published by CRC Press. This book was released on 2006-07-20 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent source of reference on the current practice of physical modelling in geotechnics and environmental engineering. Volume One concentrates on physical modelling facilities and experimental techniques, soil characterisation, slopes, dams, liquefaction, ground improvement and reinforcement, offshore foundations and anchors, and pipelines. V