Download or read book Centrifuge Model Testing of Soils written by Mosaid M. Al-Hussaini and published by . This book was released on 1976 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.
Download or read book Centrifuge Modelling for Civil Engineers written by Gopal Madabhushi and published by CRC Press. This book was released on 2017-09-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.
Download or read book The Application of Geotechnical Centrifuge Model Test Data to Design written by R. S. Steedman and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2003-09-02 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.
Download or read book Constitutive and Centrifuge Modelling Two Extremes written by S. Springman and published by CRC Press. This book was released on 2002-01-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.
Download or read book Physical Models written by Bill Addis and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Download or read book The Application of Dynamic Geotechnical Centrifuge Model Test Data to Design written by R. S. S. Steedman and published by . This book was released on 1990 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.
Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2018-10-08 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.
Download or read book Cryospheric Systems written by Geological Society of London and published by Geological Society of London. This book was released on 2005 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the term periglacial by Lozinski in 1909 to describe the cold-climate conditions in the zone adjacent to, but beyond, the Pleistocene glaciers encouraged the separate development of geocryological and glaciological research. Geological and geomorphological processes at the interface between glaciers and permafrost have, as a result, been given less attention than they warrant, and the influence of one on the other has in many respects been neglected. This book includes a collection of papers that emphasize glacier-permafrost interactions. Papers consider permafrost and its influence on glacitectonic processes, glacial meltwater systems and ground-ice development in proglacial and ice-marginal environments. In addition, recent research findings are reported on paraglacial processes, permafrost evolution, rock glaciers, the formation of ice-wedge casts and periglacial slope evolution. It is hoped that this book will stimulate interest in the interface between glacial and periglacial systems, and encourage further collaborative research involving glaciologists and glacial geologists on the one hand, and geocryologists and permafrost scientists on the other.
Download or read book Interlaboratory Studies to Evaluate the Repeatability of Dynamic Centrifuge Model Tests written by K. Arulanandan and published by . This book was released on 1994 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the VELACS (VErification of Liquefaction Analysis Using Centrifuge Studies) Project, a series of dynamic centrifuge model tests were duplicated at different Universities (U.C. Davis, UC Berkeley, Caltech, Cambridge, Colorado, MIT, Princeton, and RPI) to assess the repeatability of the test results and to provide a data base for a Class A (before the event) type prediction of the test results. This paper will present the results obtained on different centrifuges, the evaluation of the repeatability of the results, and discussions on the usefulness of the results for the validation of constitutive models and numerical procedures. The experience and lessons learnt from this practice show that standardization of dynamic centrifuge modeling is very important in order to achieve repeatability of test results. The results presented here are based on the materials published in a Proceedings of the VELACS Symposium.
Download or read book The Influence of Variation of Centrifugal Acceleration and Model Container Size on Accuracy of Centrifuge Test written by X. Zeng and published by . This book was released on 2002 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifuge modeling has become a popular and powerful experimental tool in geotechnical engineering. The centrifugal acceleration, which is used to simulate the gravitational acceleration, varies within a model in both magnitude and direction. As a result, the stress field in a centrifuge model is different from that in the prototype being simulated. This paper presents the results of a numerical simulation of the effect of the variation in radial centrifugal acceleration on the stress distribution in a centrifuge model, and its impact on the accuracy of test results. The influence of the centrifuge radius and the size of a model container is investigated.
Download or read book Fundamentals of Discrete Element Methods for Rock Engineering Theory and Applications written by Lanru Jing and published by Elsevier. This book was released on 2007-07-18 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some fundamental concepts behind the basic theories and tools of discrete element methods (DEM), its historical development, and its wide scope of applications in geology, geophysics and rock engineering. Unlike almost all books available on the general subject of DEM, this book includes coverage of both explicit and implicit DEM approaches, namely the Distinct Element Methods and Discontinuous Deformation Analysis (DDA) for both rigid and deformable blocks and particle systems, and also the Discrete Fracture Network (DFN) approach for fluid flow and solute transport simulations. The latter is actually also a discrete approach of importance for rock mechanics and rock engineering. In addition, brief introductions to some alternative approaches are also provided, such as percolation theory and Cosserat micromechanics equivalence to particle systems, which often appear hand-in-hand with the DEM in the literature. Fundamentals of the particle mechanics approach using DEM for granular media is also presented. · Presents the fundamental concepts of the discrete models for fractured rocks, including constitutive models of rock fractures and rock masses for stress, deformation and fluid flow · Provides a comprehensive presentation on discrete element methods, including distinct elements, discontinuous deformation analysis, discrete fracture networks, particle mechanics and Cosserat representation of granular media · Features constitutive models of rock fractures and fracture system characterization methods detaiing their significant impacts on the performance and uncertainty of the DEM models
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Solid Liquid Filtration written by Barry A. Perlmutter and published by Butterworth-Heinemann. This book was released on 2015-02-06 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Guides in Chemical Engineering are a cluster of short texts that each provides a focused introductory view on a single subject. The full library spans the main topics in the chemical process industries that engineering professionals require a basic understanding of. They are ‘pocket publications’ that the professional engineer can easily carry with them or access electronically while working. Each text is highly practical and applied, and presents first principles for engineers who need to get up to speed in a new area fast. The focused facts provided in each guide will help you converse with experts in the field, attempt your own initial troubleshooting, check calculations, and solve rudimentary problems. Solid-Liquid Filtration covers the basic principles and mechanisms of filtration, filtration testing including filter aids and filter media, types of filtration systems, selection of filtration systems and typical operating and troubleshooting approaches. This guide also discusses general applications and tips for process filtration and can be utilized by process engineers as a framework for “idea-generation when analyzing filtration for an operating bottleneck issue or a new process development problem. Practical, short, concise information on the basics will help you get an answer or teach yourself a new topic quickly Supported by industry examples to help you solve a real world problem Single subject volumes provide key facts for professionals
Download or read book Specialty Session on Centrifuge Model Tests written by Asian Institute of Technology and published by . This book was released on 1986 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
