Download or read book Cell to Cell Mapping written by C.S. Hsu and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, I have been interested in global analysis of nonlinear systems. The original interest stemmed from the study of snap-through stability and jump phenomena in structures. For systems of this kind, where there exist multiple stable equilibrium states or periodic motions, it is important to examine the domains of attraction of these responses in the state space. It was through work in this direction that the cell-to-cell mapping methods were introduced. These methods have received considerable development in the last few years, and have also been applied to some concrete problems. The results look very encouraging and promising. However, up to now, the effort of developing these methods has been by a very small number of people. There was, therefore, a suggestion that the published material, scattered now in various journal articles, could perhaps be pulled together into book form, thus making it more readily available to the general audience in the field of nonlinear oscillations and nonlinear dynamical systems. Conceivably, this might facilitate getting more people interested in working on this topic. On the other hand, there is always a question as to whether a topic (a) holds enough promise for the future, and (b) has gained enough maturity to be put into book form. With regard to (a), only the future will tell. With regard to (b), I believe that, from the point of view of both foundation and methodology, the methods are far from mature.
Download or read book Cell Mapping Methods written by Jian-Qiao Sun and published by Springer. This book was released on 2018-06-20 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest algorithmic developments in the cell-mapping method for the global analysis of nonlinear dynamic systems, global solutions for multi-objective optimization problems, and global solutions for zeros of complex algebraic equations. It also discusses related engineering and scientific applications, including the nonlinear design of structures for better vibration resistance and reliability; multi-objective, structural-acoustic design for sound abatement; optimal multi-objective design of airfoils for better lift; and optimal multi-objective design of linear and nonlinear controls with or without time delay. The first book on the subject to include extensive Matlab and C++ codes, it presents various implementation algorithms of the cell-mapping method, enabling readers to understand how the method works and its programming aspects. A link to the codes on the Springer website will be provided to the readers.
Download or read book Advanced Concepts In Nuclear Energy Risk Assessment And Management written by Tunc Aldemir and published by World Scientific. This book was released on 2018-04-25 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 30 years, numerous concerns have been raised in the literature regarding the capability of static modeling approaches such as the event-tree (ET)/fault-tree (FT) methodology to adequately account for the impact of process/hardware/software/firmware/human interactions on nuclear power plant safety assessment, and methodologies to augment the ET/FT approach have been proposed. Often referred to as dynamic probabilistic risk/safety assessment (DPRA/DPSA) methodologies, which use a time-dependent phenomenological model of system evolution along with a model of its stochastic behavior to model for possible dependencies among failure events. The book contains a collection of papers that describe at existing plant level applicable DPRA/DPSA tools, as well as techniques that can be used to augment the ET/FT approach when needed.
Download or read book Fuzzy Control Systems written by Abraham Kandel and published by CRC Press. This book was released on 1993-09-27 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy Control Systems explores one of the most active areas of research involving fuzzy set theory. The contributors address basic issues concerning the analysis, design, and application of fuzzy control systems. Divided into three parts, the book first devotes itself to the general theory of fuzzy control systems. The second part deals with a variety of methodologies and algorithms used in the analysis and design of fuzzy controllers. The various paradigms include fuzzy reasoning models, fuzzy neural networks, fuzzy expert systems, and genetic algorithms. The final part considers current applications of fuzzy control systems. This book should be required reading for researchers, practitioners, and students interested in fuzzy control systems, artificial intelligence, and fuzzy sets and systems.
Download or read book Caenorhabditis Elegans written by and published by Academic Press. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expansion Microscopy for Cell Biology written by and published by Academic Press. This book was released on 2021-01-19 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expansion Microscopy for Cell Biology, Volume 161 in the Methods in Cell Biology series, compiles recent developments in expansion microscopy techniques (Pro-ExM, U-ExM, Ex-STED, X10, Ex-dSTORM, etc.) and their applications in cell biology, ranging from mitosis, centrioles or nuclear pore complex to plant cell, bacteria, Drosophila or neurons. Chapters in this new release include Protein-retention Expansion Microscopy: Improved Sub-cellular Imaging Resolution through Physical Specimen Expansion, Ultrastructure Expansion Microscopy (U-ExM), Expansion STED microscopy (ExSTED), Simple multi-color super-resolution by X10 microscopy, Expansion microscopy imaging of various neuronal structures, Mapping the neuronal cytoskeleton using expansion microscopy, Mechanical expansion microscopy, and much more. - Provides the authority and expertise of leading contributors from an international board of authors - Represents the latest release in the Methods in Cell Biology series - Includes the latest information on Expansion Microscopy for Cell Biology
Download or read book Nonlinear Dynamics and Stochastic Mechanics written by Wolfgang Kliemann and published by CRC Press. This book was released on 2018-05-04 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering systems have played a crucial role in stimulating many of the modern developments in nonlinear and stochastic dynamics. After 20 years of rapid progress in these areas, this book provides an overview of the current state of nonlinear modeling and analysis for mechanical and structural systems. This volume is a coherent compendium written by leading experts from the United States, Canada, Western and Eastern Europe, and Australia. The 22 articles describe the background, recent developments, applications, and future directions in bifurcation theory, chaos, perturbation methods, stochastic stability, stochastic flows, random vibrations, reliability, disordered systems, earthquake engineering, and numerics. The book gives readers a sophisticated toolbox that will allow them to tackle modeling problems in mechanical systems that use stochastic and nonlinear dynamics ideas. An extensive bibliography and index ensure this volume will remain a reference standard for years to come.
Download or read book Proceedings of the 2nd International Conference on Mechanical System Dynamics written by Xiaoting Rui and published by Springer Nature. This book was released on with total page 4383 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Biology of the Cell written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EVOLVE A Bridge between Probability Set Oriented Numerics and Evolutionary Computation II written by Oliver Schütze and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of papers from the EVOLVE 2012 held in Mexico City, Mexico. The aim of the EVOLVE is to build a bridge between probability, set oriented numerics and evolutionary computing, as to identify new common and challenging research aspects. The conference is also intended to foster a growing interest for robust and efficient methods with a sound theoretical background. EVOLVE is intended to unify theory-inspired methods and cutting-edge techniques ensuring performance guarantee factors. By gathering researchers with different backgrounds, a unified view and vocabulary can emerge where the theoretical advancements may echo in different domains. Summarizing, the EVOLVE focuses on challenging aspects arising at the passage from theory to new paradigms and aims to provide a unified view while raising questions related to reliability, performance guarantees and modeling. The papers of the EVOLVE 2012 make a contribution to this goal.
Download or read book Global Nonlinear Dynamics for Engineering Design and System Safety written by Stefano Lenci and published by Springer. This book was released on 2018-09-24 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book which exploits concepts and tools of global nonlinear dynamics for bridging the gap between theoretical and practical stability of systems/structures, and for possibly enhancing the engineering design in macro-, micro- and nano-mechanics. Addressed topics include complementing theoretical and practical stability to achieve load carrying capacity; dynamical integrity for analyzing global dynamics, for interpreting/predicting experimental behavior, for getting hints towards engineering design; techniques for control of chaos; response of uncontrolled and controlled system/models in applied mechanics and structural dynamics by also considerung the effect of system imperfections; from relatively simple systems to multidimensional models representative of real world applications; potential and expected impact of global dynamics for engineering design.
Download or read book EVOLVE A Bridge between Probability Set Oriented Numerics and Evolutionary Computation IV written by Michael Emmerich and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical and computational methods are nowadays used in a wide range of contexts in complex systems research, biology, physics, and engineering. Over the last decades different methodological schools have emerged with emphasis on different aspects of computation, such as nature-inspired algorithms, set oriented numerics, probabilistic systems and Monte Carlo methods. Due to the use of different terminologies and emphasis on different aspects of algorithmic performance there is a strong need for a more integrated view and opportunities for cross-fertilization across particular disciplines. These proceedings feature 20 original publications from distinguished authors in the cross-section of computational sciences, such as machine learning algorithms and probabilistic models, complex networks and fitness landscape analysis, set oriented numerics and cell mapping, evolutionary multiobjective optimization, diversity-oriented search, and the foundations of genetic programming algorithms. By presenting cutting edge results with a strong focus on foundations and integration aspects this work presents a stepping stone towards efficient, reliable, and well-analyzed methods for complex systems management and analysis.
Download or read book Global Analysis of Nonlinear Dynamics written by Jian-Qiao Sun and published by Springer Science & Business Media. This book was released on 2012-05-01 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Analysis of Nonlinear Dynamics collects chapters on recent developments in global analysis of non-linear dynamical systems with a particular emphasis on cell mapping methods developed by Professor C.S. Hsu of the University of California, Berkeley. This collection of contributions prepared by a diverse group of internationally recognized researchers is intended to stimulate interests in global analysis of complex and high-dimensional nonlinear dynamical systems, whose global properties are largely unexplored at this time.
Download or read book Bifurcation and Chaos in Complex Systems written by and published by Elsevier. This book was released on 2006-06-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the recent achievements on bifurcation studies of nonlinear dynamical systems. The contributing authors of the book are all distinguished researchers in this interesting subject area. The first two chapters deal with the fundamental theoretical issues of bifurcation analysis in smooth and non-smooth dynamical systems. The cell mapping methods are presented for global bifurcations in stochastic and deterministic, nonlinear dynamical systems in the third chapter. The fourth chapter studies bifurcations and chaos in time-varying, parametrically excited nonlinear dynamical systems. The fifth chapter presents bifurcation analyses of modal interactions in distributed, nonlinear, dynamical systems of circular thin von Karman plates. The theories, methods and results presented in this book are of great interest to scientists and engineers in a wide range of disciplines. This book can be adopted as references for mathematicians, scientists, engineers and graduate students conducting research in nonlinear dynamical systems.· New Views for Difficult Problems· Novel Ideas and Concepts · Hilbert's 16th Problem· Normal Forms in Polynomial Hamiltonian Systems · Grazing Flow in Non-smooth Dynamical Systems· Stochastic and Fuzzy Nonlinear Dynamical Systems· Fuzzy Bifurcation· Parametrical, Nonlinear Systems· Mode Interactions in nonlinear dynamical systems
Download or read book Recent Advances in Structural Engineering written by and published by Universities Press. This book was released on 2005-02 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains state-of-the-art review articles on specific research areas in the civil engineering discipline-the areas include geotechnical engineering, hydraulics and water resources engineering, and structural engineering. The articles are written by invited authors who are currently active at the international level in their respective research fields.
Download or read book Surface Mining Second Edition written by Bruce A. Kennedy and published by SME. This book was released on 1990 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SME classic is both a reference book for the working engineer and a textbook for the mining student. This hardcover edition gives a brief history of surface mining and a general overview of the state of surface mining today--topics range from production and productivity to technological developments and trends in equipment. This extremely useful text takes the approach that exploration and mining geologists must be expert in a number of fields, including basic finance and economics, logistics, and pragmatic prospecting. Readers will find material on all these topics and more. The book's nine chapters include: Introduction, Exploration and Geology Techniques, Ore Reserve Estimation, Feasibility Studies and Project Financing, Planning and Design of Surface Mines, Mine Operations, Mine Capital and Operating Costs, Management and Organization, and Case Studies. The book is fully indexed.
Download or read book Bioinspired Legged Locomotion written by Maziar Ahmad Sharbafi and published by Butterworth-Heinemann. This book was released on 2017-11-21 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioinspired Legged Locomotion: Models, Concepts, Control and Applications explores the universe of legged robots, bringing in perspectives from engineering, biology, motion science, and medicine to provide a comprehensive overview of the field. With comprehensive coverage, each chapter brings outlines, and an abstract, introduction, new developments, and a summary. Beginning with bio-inspired locomotion concepts, the book's editors present a thorough review of current literature that is followed by a more detailed view of bouncing, swinging, and balancing, the three fundamental sub functions of locomotion. This part is closed with a presentation of conceptual models for locomotion. Next, the book explores bio-inspired body design, discussing the concepts of motion control, stability, efficiency, and robustness. The morphology of legged robots follows this discussion, including biped and quadruped designs. Finally, a section on high-level control and applications discusses neuromuscular models, closing the book with examples of applications and discussions of performance, efficiency, and robustness. At the end, the editors share their perspective on the future directions of each area, presenting state-of-the-art knowledge on the subject using a structured and consistent approach that will help researchers in both academia and industry formulate a better understanding of bioinspired legged robotic locomotion and quickly apply the concepts in research or products. - Presents state-of-the-art control approaches with biological relevance - Provides a thorough understanding of the principles of organization of biological locomotion - Teaches the organization of complex systems based on low-dimensional motion concepts/control - Acts as a guideline reference for future robots/assistive devices with legged architecture - Includes a selective bibliography on the most relevant published articles
