Download or read book Cavitation Phenomena and Bubbles Dynamic in Turbomachinery written by Behzad Ranjbar and published by LAP Lambert Academic Publishing. This book was released on 2019-09-24 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation in centrifugal pumps is regarded as the main cause of deterioration of important parts of the pump, including impellers and volute. In order to examine this phenomenon, first a two-stage BB2 pump of the API design was experimentally investigated in terms of head and flow rate in single-phase flow and flow with cavitation, then the results were compared to those of the model created in the ANSYS CFX software environment. In addition, the Stepanov and Dixon theories were employed to optimize the fluid flow inlet conditions in the impeller. The main focus in the present study is on the concepts of cavitation in the pumps, the performance curves of the pumps, and the net positive suction head (NPSH) of the system. The ultimate objective in this project is to investigate the predictive curves of the system aiming to specify the cavitation initiation area.
Download or read book Cavitation and Bubble Dynamics written by Phoevos Koukouvinis and published by Elsevier. This book was released on 2021-09-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics: Fundamentals and Applications examines the latest advances in the field of cavitation and multiphase flows, including associated effects such as material erosion and spray instabilities. This book tackles the challenges of cavitation hindrance in the industrial world, while also drawing on interdisciplinary research to inform academic audiences on the latest advances in the fundamentals. Contributions to the book come from a wide range of specialists in areas including fuel systems, hydropower, marine engineering, multiphase flows and computational fluid mechanics, allowing readers to discover novel interdisciplinary experimentation techniques and research results. This book will be an essential tool for industry professionals and researchers working on applications where cavitation hindrance affects reliability, noise, and vibrations. Covers a wide range of cavitation and bubble dynamics phenomena, including shock wave emission, jetting, and luminescence Provides the latest advice about applications including cavitation tunnels, cavitation testing, flow designs to avoid cavitation in pumps and other hydromachinery, and flow lines Describes novel experimental techniques, such as x-ray imaging and new computational techniques
Download or read book Cavitation Instabilities and Rotordynamic Effects in Turbopumps and Hydroturbines written by Luca d'Agostino and published by Springer. This book was released on 2017-03-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a detailed approach to the physics, fluid dynamics, modeling, experimentation and numerical simulation of cavitation phenomena, with special emphasis on cavitation-induced instabilities and their implications on the design and operation of high performance turbopumps and hydraulic turbines. The first part covers the fundamentals (nucleation, dynamics, thermodynamic effects, erosion) and forms of cavitation (attached cavitation, cloud cavitation, supercavitation, vortex cavitation) relevant to hydraulic turbomachinery, illustrates modern experimental techniques for the characterization, visualization and analysis of cavitating flows, and introduces the main aspects of the hydrodynamic design and performance of axial inducers, centrifugal turbopumps and hydo-turbines. The second part focuses on the theoretical modeling, experimental analysis, and practical control of cavitation-induced fluid-dynamic and rotordynamic instabilities of hydraulic turbomachinery, with special emphasis on cavitating turbopumps (cavitation surge, rotating cavitation, higher order cavitation surge, rotordynamic whirl forces). Finally, the third part of the book illustrates the alternative approaches for the simulation of cavitating flows, with emphasis on both modeling and numerical aspects. Examples of applications to the simulation of unsteady cavitation in internal flows through hydraulic machinery are illustrated in detail.
Download or read book Cavitation and Bubble Dynamics written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2014 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics deals with fundamental physical processes of bubble dynamics and cavitation for graduate students and researchers.
Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.
Download or read book Cavitation of Hydraulic Machinery written by S. C. Li and published by World Scientific. This book was released on 2000 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the Hydraulic Machinery Book series deals with cavitation and its effects in turbines and pumps. After introducing cavitation and its relation with hydraulic machines, the invited contributors throughout the world review in detail relevant cavitation subjects from fundamental phenomena to various problems and solution measures in hydraulic machines. The authors are internationally recognized experts in their fields.
Download or read book Cavitation and Bubble Dynamics written by Russell Duffy and published by Createspace Independent Publishing Platform. This book was released on 2017-11-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics deals with the fundamental physical processes of bubble dynamics and the phenomenon of cavitation. It is ideal for graduate students and research engineers and scientists, and a basic knowledge of fluid flow and heat transfer is assumed. The analytical methods presented are developed from basic principles. The book begins with a chapter on nucleation and describes both the theory and observations in flowing and non-flowing systems. Three chapters provide a systematic treatment of the dynamics and growth, collapse, or oscillation of individual bubbles in otherwise quiescent fluids. The following chapters summarize the motion of bubbles in liquids, describe some of the phenomena that occur in homogeneous bubbly flows, with emphasis on cloud cavitation, and summarize some of the experimental observations of cavitating flows. The last chapter provides a review of free streamline methods used to treat separated cavity flows with large attached cavities.
Download or read book Fluid Dynamics and Heat Transfer of Turbomachinery written by Budugur Lakshminarayana and published by John Wiley & Sons. This book was released on 1995-12-15 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past three decades, information in the aerospace and mechanical engineering fields in general and turbomachinery in particular has grown at an exponential rate. Fluid Dynamics and Heat Transfer of Turbomachinery is the first book, in one complete volume, to bring together the modern approaches and advances in the field, providing the most up-to-date, unified treatment available on basic principles, physical aspects of the aerothermal field, analysis, performance, theory, and computation of turbomachinery flow and heat transfer. Presenting a unified approach to turbomachinery fluid dynamics and aerothermodynamics, the book concentrates on the fluid dynamic aspects of flows and thermodynamic considerations rather than on those related to materials, structure, or mechanical aspects. It covers the latest material and all types of turbomachinery used in modern-day aircraft, automotive, marine, spacecraft, power, and industrial applications; and there is an entire chapter devoted to modern approaches on computation of turbomachinery flow. An additional chapter on turbine cooling and heat transfer is unique for a turbomachinery book. The author has undertaken a systematic approach, through more than three hundred illustrations, in developing the knowledge base. He uses analysis and data correlation in his discussion of most recent developments in this area, drawn from over nine hundred references and from research projects carried out by various organizations in the United States and abroad. This book is extremely useful for anyone involved in the analysis, design, and testing of turbomachinery. For students, it can be used as a two-semester course of senior undergraduate or graduate study: the first semester dealing with the basic principles and analysis of turbomachinery, the second exploring three-dimensional viscid flows, computation, and heat transfer. Many sections are quite general and applicable to other areas in fluid dynamics and heat transfer. The book can also be used as a self-study guide to those who want to acquire this knowledge. The ordered, meticulous, and unified approach of Fluid Dynamics and Heat Transfer of Turbomachinery should make the specialization of turbomachinery in aerospace and mechanical engineering much more accessible to students and professionals alike, in universities, industry, and government. Turbomachinery theory, performance, and analysis made accessible with a new, unified approach For the first time in nearly three decades, here is a completely up-to-date and unified approach to turbomachinery fluid dynamics and aerothermodynamics. Combining the latest advances, methods, and approaches in the field, Fluid Dynamics and Heat Transfer of Turbomachinery features: The most comprehensive and complete coverage of the fluid dynamics and aerothermodynamics of turbomachinery to date A spotlight on the fluid dynamic aspects of flows and the thermodynamic considerations for turbomachinery (rather than the structural or material aspects) A detailed, step-by-step presentation of the analytical and computational models involved, which allows the reader to easily construct a flowchart from which to operate Critical reviews of all the existing analytical and numerical models, highlighting the advantages and drawbacks of each Comprehensive coverage of turbine cooling and heat transfer, a unique feature for a book on turbomachinery An appendix of basic computation techniques, numerous tables, and listings of common terminology, abbreviations, and nomenclature Broad in scope, yet concise, and drawing on the author's teaching experience and research projects for government and industry, Fluid Dynamics and Heat Transfer of Turbomachinery explains and simplifies an increasingly complex field. It is an invaluable resource for undergraduate and graduate students in aerospace and mechanical engineering specializing in turbomachinery, for research and design engineers, and for all professionals who are—or wish to be—at the cutting edge of this technology.
Download or read book Fluid Dynamics of Cavitation and Cavitating Turbopumps written by Luca d'Agostino and published by Springer Science & Business Media. This book was released on 2008-04-20 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the fluid dynamics of cavitation with special reference to high power density turbopumps, where it represents the major source of performance and life degradation. While covering the more fundamental aspects of cavitation and the main kinds of cavitating flows, there is focus on the hydrodynamics and instabilities of cavitating turbopumps. The book also illustrates the alternative approaches for modeling and engineering simulation of cavitating flows.
Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book Cavitation and Associated Phenomena written by Dmitry A. Biryukov and published by CRC Press. This book was released on 2022-04-28 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation is a dangerous process which destroys objects in a fluid. Scientific description of this multifaceted phenomenon is based on almost every area of physics, and many interesting effects are connected with cavitation. The most intriguing of them is sonoluminescence – the light emitted from a cavitating fluid. This book presents a full-scale description of cavitation: from the basic thermodynamic principles to special phenomena associated with this complex process, from the dynamics of a single gas cavity to the catastrophic macroscopic manifestations, from the domestic observations to the nuances of X-ray spectroscopic research.
Download or read book Fluid Mechanics Acoustics and Design of Turbomachinery written by B. Lakshminarayana and published by . This book was released on 1974 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Vortices written by Sheldon Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Vortices is a comprehensive, up-to-date, research-level overview covering all salient flows in which fluid vortices play a significant role. The various chapters have been written by specialists from North America, Europe and Asia, making for unsurpassed depth and breadth of coverage. Topics addressed include fundamental vortex flows (mixing layer vortices, vortex rings, wake vortices, vortex stability, etc.), industrial and environmental vortex flows (aero-propulsion system vortices, vortex-structure interaction, atmospheric vortices, computational methods with vortices, etc.), and multiphase vortex flows (free-surface effects, vortex cavitation, and bubble and particle interactions with vortices). The book can also be recommended as an advanced graduate-level supplementary textbook. The first nine chapters of the book are suitable for a one-term course; chapters 10--19 form the basis for a second one-term course.
Download or read book Cavitation and Multiphase Flow Phenomena written by Frederick G. Hammitt and published by McGraw-Hill Companies. This book was released on 1980 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cavity Dynamics and Splashing Mechanism in Droplets written by Zhaohao Li and published by Springer. This book was released on 2024-04-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief explores the pivotal realm of droplet cavitation, a subject of great significance for enhancing fuel atomization and improving various industrial processes. The authors employ high-speed photography experiments, analyze bubble dynamics equations, and utilize numerical simulations to explore the dynamic behavior of cavitation bubbles and droplets. The book analyzes the entire lifecycle of cavitation bubbles, their interactions with different liquid droplets, and the key parameters governing their oscillation and collapse and sheds light on the collapse mechanisms and shock wave propagation influenced by liquid droplets. Additionally, it investigates the dynamics of droplet spattering by categorizing spatter patterns under diverse conditions, discusses the critical stability of droplet surfaces, and reveals the mechanisms by which cavitation bubble collapses induce droplet breakage. Taking vapor bubbles and diesel droplets as examples, the dynamic characteristics of specific droplets containing bubbles are also analyzed. This book offers an in-depth understanding of these phenomena with practical implications for a wide range of industrial applications and is a useful tool for researchers and engineers working in the fields of fluid dynamics, combustion engineering, and atomization processes.
Download or read book What We Learned from Cavitation Bubbles in Microgravity written by Mohamed Farhat and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present chapter is about the Flash and Splash project, which is dedicated to the study of bubble dynamics in microgravity. The story of this project started in 2004 with a simple curiosity on how a cavitation bubble may behave within a water drop and evolved into an outstanding, internationally renowned science project as well as a wonderful human adventure. So far, we have participated in nine European Space Agency (ESA) parabolic flight campaigns (PFC) and made a significant progress in understanding the cavitation phenomenon. First, we investigated the dynamics of a cavitation bubble within a water drop and learned how the collapse may lead to the formation of a double jet. We discovered the formation of secondary cavitation due to the confinement of shockwaves within the drop. We used this result to propose a new path for erosion due to a high-speed impact of water drops on a solid surface. Then, we addressed the effect of gravity on bubble dynamics and came up with a unified framework to explain and predict key phenomena, such as microjets, shockwaves and luminescence. Parabolic flights gave us the unique opportunity to modulate the gravity-induced pressure gradient, which is crucial for the fate of a collapsing bubble.
Download or read book Cavitation written by Yves Lecoffre and published by Routledge. This book was released on 2021-10-08 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text deals with the concept that cavitation is the main limitation to the performance of hydraulic components. Topics covered include the vaporization of liquids due to high velocities or pressure fluctuations, and the effects of cavitation on the performances of rotary machinery. One chapter is devoted to cavitation noise which concerns many users, including surface ships and submarines, and the author finishes with some examples of the use of cavitation and subject-specific measuring techniques.
