Download or read book Catalytically Activated Diesel Particulate Traps written by B. Engler and published by . This book was released on 1986 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Particulate Filter Technology written by Timothy V Johnson and published by SAE International. This book was released on 2007-03-28 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, the complexity of the Diesel Particulate Filter (DPF) system has hindered its commercial success. Stringent regulations of diesel emissions has lead to advancements in this technology, therefore mainstreaming the use of DPFs in light- and heavy-duty diesel filtration applications. This book covers the latest and most important research in DPF systems, focusing mainly on the advancements of the years 2002-2006. Editor Timothy V. Johnson selected the top 29 SAE papers covering the most significant research in this technology.
Download or read book Revolutionary Systems for Catalytic Combustion and Diesel Catalytic Particulate Traps written by James Edward Miller and published by . This book was released on 2004 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a summary of an LDRD project completed for the development of materials and structures conducive to advancing the state of the art for catalyst supports and diesel particulate traps. An ancillary development for bio-medical bone scaffolding was also realized. Traditionally, a low-pressure drop catalyst support, such as a ceramic honeycomb monolith, is used for catalytic reactions that require high flow rates of gases at high-temperatures. A drawback to the traditional honeycomb monoliths under these operating conditions is poor mass transfer to the catalyst surface in the straight-through channels. ''Robocasting'' is a unique process developed at Sandia National Laboratories that can be used to manufacture ceramic monoliths with alternative 3-dimensional geometries, providing tortuous pathways to increase mass transfer while maintaining low-pressure drops. These alternative 3-dimensional geometries may also provide a foundation for the development of self-regenerating supports capable of trapping and combusting soot particles from a diesel engine exhaust stream. This report describes the structures developed and characterizes the improved catalytic performance that can result. The results show that, relative to honeycomb monolith supports, considerable improvement in mass transfer efficiency is observed for robocast samples synthesized using an FCC-like geometry of alternating rods. Also, there is clearly a trade-off between enhanced mass transfer and increased pressure drop, which can be optimized depending on the particular demands of a given application. Practical applications include the combustion of natural gas for power generation, production of syngas, and hydrogen reforming reactions. The robocast lattice structures also show practicality for diesel particulate trapping. Preliminary results for trapping efficiency are reported as well as the development of electrically resistive lattices that can regenerate the structure by combusting the trapped soot. During this project an ancillary bio-medical application was discovered for lattices of hydroxyapatite. These structures show promise as bone scaffolds for the reparation of damaged bone. A case study depicting the manufacture of a customized device that fits into a damaged mandible is described.
Download or read book Catalysis and Automotive Pollution Control III written by A. Frennet and published by Elsevier. This book was released on 1995-11-02 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings are based on the third of a series of symposia devoted to the use of catalysis for the depollution of exhaust gases of motor vehicles. Although catalysts have been used for this purpose for some thirty years, the subject is still very topical because of its economic impact. The increasing number of submitted, accepted and published papers amply attests to this fact.
Download or read book Catalysis and Automotive Pollution Control II written by A. Crucq and published by Elsevier. This book was released on 1991-11-20 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the second symposium on Catalysis and Automotive Pollution Control. CAPoC 2 was a great success from the point of view of its scientific interest, as evidenced by the content of this book, and also from the high participation, some 260 scientists. About two-thirds of the contributors came from the industrial world, mainly the car and oil industries and catalyst manufacturers. This is ample proof that exhaust catalysis remains a major topic of interest. The first part of the book is a general introduction to the problem of automotive pollution. The second, strictly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Regenerating Catalytic Particulate Traps for Heavy duty Diesel Engines written by William J. Bandy (III.) and published by . This book was released on 1992 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Catalytic Air Pollution Control written by Ronald M. Heck and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Air Pollution Control: Commercial Technology is the primary source for commercial catalytic air pollution control technology, offering engineers a comprehensive account of all modern catalytic technology. This Third Edition covers all the new advances in technology in automotive catalyst control technology, diesel engine catalyst control technology, small engine catalyst control technology, and alternate sustainable fuels for auto and diesel.
Download or read book Diesel Particulate Emissions Landmark Research 1994 2001 written by John H Johnson and published by SAE International. This book was released on 2002-02-20 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for manufacturers to meet U.S. Environmental Protection Agency (EPA) mobile source diesel emissions standards for on-highway light duty and heavy duty vehicles has been the driving force for the control of diesel particulate and NOx emissions reductions. Diesel Particulate Emissions: Landmark Research 1994-2001 contains the latest research and development findings that will help guide engineers to achieve low particulate emissions from future engines. Based on extensive SAE literature from the past seven years, the 45 papers in this book have been selected from the SAE Transactions Journals.
Download or read book Combined Filtration and Catalytic Combustion of Diesel Particulate written by E. Cauda and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Diesel Fuels written by Daniel J Holt and published by SAE International. This book was released on 2004-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
Download or read book Diesel Particulate Removal Via Catalytic Wall flow Traps written by Emanuele Cauda and published by . This book was released on 2005 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Thermal and Catalytic Diesel Particulate Trap Regeneration written by V. D. Rao and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automobiles and Pollution written by Paul Degobert and published by Editions OPHRYS. This book was released on with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the impact automobile emissions have on air pollution, focusing on the share of pollution that can accurately be attributed to the use of vehicles. Presents general information on atmospheric pollution and its regulation in Europe, then discusses its impact on health and the environment, the chemistry and mechanisms of automobile pollution, the influence of fuel properties, post-combustion treatments, and economic challenges to alleviating the problem. Translated and enlarged from Automobile et pollution published by Editions Technip in Paris in 1992. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Thermal and Catalytic Regeneration of Diesel Particulate Traps written by W. R. Wade and published by . This book was released on 1983 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Engine Technology written by Richard Van Basshuysen and published by SAE International. This book was released on 2007-09-28 with total page 1071 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part dictionary, part encyclopedia, Modern Engine Technology from A to Z will serve as your comprehensive reference guide for many years to come. Keywords throughout the text are in alphabetical order and highlighted in blue to make them easier to find, followed, where relevant, by subentries extending to as many as four sublevels. Full-color illustrations provide additional visual explanation to the reader. This book features: approximately 4,500 keywords, with detailed cross-references more than 1,700 illustrations, some in full color in-depth contributions from nearly 100 experts from industry and science engine development, both theory and practice
