Download or read book Catalytic Reduction in the Vapor Phase written by Frank B. Kitchel and published by . This book was released on 1941 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Catalytic Hydrogenation of the Condensation Products of Acetone written by Eugene Patrick Mullins and published by . This book was released on 1923 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Anilines written by Zvi Rappoport and published by John Wiley & Sons. This book was released on 2007-03-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aniline is the parent molecule of a vast family of aromatic amines. Since its discovery in 1826 it has become one of the hundred most important building blocks in chemistry. Aniline is used as an intermediate in many different fields of applications, such as isocyanates, rubber processing chemicals, dyes and pigments, agricultural chemicals and pharmaceuticals. The understanding of functional groups is key for the understanding of all organic chemistry. In the tradition of the Patai Series, this volume treats all aspects of this functional group. It contains chapters on the theoretical and computational foundations; on analytical and spectroscopical aspects with dedicated chapters on Mass Spectrometry, NMR, IR/UV, etc.; on reaction mechanisms; on applications in syntheses.
Download or read book Catalytic Transformations of Sustainable and Versatile Furanic Chemicals written by S. Saravanamurugan and published by CRC Press. This book was released on 2024-12-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diminishing confined fossil resources has spurred the scientific community to strive for alternative, sustainable resources, such as terrestrial biomass, which can potentially substitute fossil-based derivatives. Lignocellulosic biomass is deemed an indispensable carbon source for meeting industrial and social demands regarding energy/fuels and chemicals. Over the past decade, significant advances have been shown in developing a broad spectrum of high-value chemicals and functional materials derived from biomass-based substrates. In connection with this, furanic chemicals, such as 5-hydroxymethylfurfural (HMF) and furfural, have recently received considerable attention due to their potential applications. Catalytic Transformations of Sustainable and Versatile Furanic Chemicals aims to explicitly display the latest technical developments on designing functional catalysts, optimizing process and reaction parameters, and improving the stability of the employed materials on the transformation of HMF and furfural to a wide range of value-added chemicals via oxidation, reduction, hydrodeoxygenation, and reductive amination processes. Features: Highlighting the importance and significance of HMF and furfural. Evaluating the transformations of HMF and furfural with various catalytic processes. Designing robust and efficient catalytic systems. Understanding the stability of catalytic materials. Understanding the characteristic features of the catalytic materials. This book aims to target not only researchers focusing on biomass valorization from academic to industrial sectors but also graduate students interested in pursuing their higher education in biochemicals (especially furanic compounds), covering various aspects in organic synthesis routes, preparation of inorganic materials and physico-chemical properties, for both chemists and chemical engineers.
Download or read book Catalytic Hydrogenation over Platinum Metals written by Paul Rylander and published by Elsevier. This book was released on 2012-12-02 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Hydrogenation over Platinum Metals focuses on catalytic hydrogenation as an effective process in attaining controlled transformations of organic compounds. Composed of contributions of various authors, the book first provides information on catalysts, equipment, and conditions. Catalyst stability and reuse; types of catalyst; platinum metals; and synergism are covered. The text proceeds with discussions on hydrogenation reactors. Topics include atmospheric pressure reactors; low pressure reactors; microreactors; and high pressure reactors. The book also covers hydrogenation of carbon-carbon unsaturation. Catalytic metal; modified catalyst systems; stereochemistry; diacetylenes; and hydrogenolysis are discussed. The text also looks at the hydrogenation of aromatics, nitrogen and carbonyl compounds, and hydrogenolysis. Numerical representations and analysis, diagrams, and reactions of compounds when exposed to different laboratory conditions are considered. The selection is a great source of data for readers interested in studying the process of catalytic hydrogenation.
Download or read book Catalytic Hydrogenation in Organic Syntheses written by Rylander and published by Elsevier. This book was released on 2012-12-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Hydrogenation in Organic Syntheses focuses on the process of catalytic hydrogenation in organic synthesis. This book gives the reader easy access to catalytic history, to show what can be done and how to do it. A variety of working generalities and common sense guides are given as aids in selecting catalytic metal, catalyst support, concentration of metal and catalyst, solvent, and reaction conditions. All manner of hydrogenation catalysts are considered and mechanisms of hydrogenation are presented at a level that is useful to the synthetic organic chemist. This volume is comprised of 15 chapters and begins with an overview of catalytic hydrogenation and heterogeneous hydrogenation catalysts, along with hydrogenation reactors and reaction conditions. The discussion then shifts to the hydrogenation of compounds such as acetylenes, olefins, aldehydes, ketones, nitriles, oximes, acids, esters, lactones, anhydrides, and nitro compounds as well as carbocyclic aromatics and heterocyclic compounds. The reader is also introduced to reductive alkylation, catalytic dehydrohalogenation, and hydrogenolysis of small rings. A chapter on miscellaneous hydrogenolyses concludes the book. This book will be of interest to organic chemists working in the field of catalytic hydrogenation.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1997 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world
Download or read book Bulletin written by United States. Bureau of Mines and published by . This book was released on 1950 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety in the Mining Industry written by Daniel Harrington and published by . This book was released on 1950 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin written by and published by . This book was released on 1950 with total page 1782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Bibliography of Pressure Hydrogenation written by Joseph L. Wiley and published by . This book was released on 1950 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Biofuels Production Optimization and Applications written by Mejdi Jeguirim and published by Elsevier. This book was released on 2023-09-08 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Biofuels Production, Optimization and Applications discusses the optimization of chemical, biochemical, thermochemical and hydrothermal processes for biofuels. With a strong focus on applications, the book bridges the gap between technological developments and prospects of commercialization. Initial chapters review efficient hydrolysis and biofuel and bio-alcohol production before reviewing key processes such as biomass gasification, syngas conversion to biofuel, and pyrolysis techniques. Several biofuel applications are presented, including those within the transport industry as well as domestic and industrial boilers. The book then finishes with a review of the circular economy, biofuel policies and ethical considerations. This will act as a systematic reference on the range of biomass conversion processes and technologies in biofuels production. It is an essential read for students, researchers and engineers interested in renewable energy, biotechnology, biofuels production and chemical engineering. - Provides recent advances in the processes and technologies currently used for biofuel production - Addresses the technology transfer of integrated biofuel upgrading and production at large scale - Highlights policy and economics of biofuel production, biofuel value chains, and how to accomplish cost-competitive results and sustainable development - Examines recent development in engines and boiler technologies for the eco-friendly applications of these biofuels in the industry and transport sectors
Download or read book Kirk Othmer Encyclopedia of Chemical Technology Volume 2 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2004-01-27 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. Set begins publication in March 2004 Over 1000 articles in 27 volumes More than 600 new or updated articles Reviews from the previous edition: "The most indispensable reference in the English language on all aspects of chemical technology...the best reference of its kind". —Chemical Engineering News, 1992 "Overall, ECT is well written and cleanly edited, and no library claiming to be a useful resource for chemical engineering professionals should be without it." —Nicholas Basta, Chemical Engineering, December 1992
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanoscience was pioneered in the 1980s with the groundbreaking research on clusters, which later led to the discovery of fullerenes. Handbook of Nanophysics: Clusters and Fullerenes focuses on the fundamental physics of these nanoscale materials and structures. Each peer-reviewed chapter contains a broad-based introduction and enhances
