Download or read book Catalytic Conversions of Synthesis Gas and Alcohols to Chemicals written by Richard G. Herman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the papers contained in this volume are based on pres entations made at the symposium on Catalytic Conversions of Synthesis Gas and Alcohols to Chemicals, which was held at the 17th Middle At lantic Regional Meeting of the American Chemical Society, April 6-8, 1983, in the setting of the Pocono Hershey Resort, White Haven, PA. I thank Dr. Ned D. Heindel, General Chairman, and Dr. Natalie Foster, Program Chairman, both of Lehigh University, for the invitation to organize the symposium. Financial support was received from Air Products and Chemicals, Inc. for the organization of the symposium, and acknowledgement is made to Air Products and Chemicals, Inc. and to the Donors of the Petroleum Research Fund, administered by the American Chemical Society, for partial support of the conduct of the symposium. The theme of this volume is the recent progress made in devel oping and understanding viable catalytic syntheses of chemicals di rectly from synthesis gas (CO + H2) or indirectly via alcohols. An aim of the symposium and of this volume is to provide a meaningful blend of applied and basic science and of the chemistry and engineer ing of processes that are, or hold promise to be, economically and industrially feasible. The topics demonstrate the increasing impor tance of synthesis gas as a versatile feedstock and emphasize the central role that alcohols, such as methanol, can playas chemical intermediates.
Download or read book Chemicals from Synthesis Gas written by R.A. Sheldon and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origins of the petrochemical industry can be traced back to the 1920s when simple organic chemicals such as ethanol and isopropanol were first prepared on an industrial scale from by-products (ethylene and propylene) of oil refining. This oil-based petrochemical industry, with lower olefms and aromatics as the key building blocks, rapidly developed into the enormous industry it is today. A multitude of products that are indispensible to modern day society, from plastics to pharmaceuticals, are derived from oil and natural gas-based hydro carbons. The industry had its heyday in the '50s and '60s when predictions of future growth rates tended to be exponential curves. However, two developments that took place in the early '70s disturbed this simplistic and optimistic view of the future. Firstly, the publication of the report for the Cub of Rome on the 'Limits to Growth' emphasized the finite nature of non-renewable fossil fuel resources. Secondly, the Oil Crisis of 1973 emphasized the vulnerability of an energy and chemicals industry that is based largely on a single raw material.
Download or read book Conversion of Carbon Dioxide into Hydrocarbons Vol 1 Catalysis written by Inamuddin and published by Springer Nature. This book was released on 2020-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the catalytic conversion of carbon dioxide into various hydrocarbons and other products using photochemical, electrochemical and thermo-chemical processes. Products include formate, formic acid, alcohols, lower and higher hydrocarbons, gases such as hydrogen, carbon monoxide and syngas.
Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2019-03-15 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are required for a variety of applications and researchers are increasingly challenged to find cost effective and environmentally benign catalysts to use. This volume looks at modern approaches to catalysis and reviews the extensive literature including direct methane conversion, nanocomposite catalysts for transformation of biofuels into syngas and hydrogen, and catalytic wet air oxidation technology for industrial wastewater treatment. Appealing broadly to researchers in academia and industry, it will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.
Download or read book Conversion of Carbon Dioxide into Hydrocarbons Vol 2 Technology written by Inamuddin and published by Springer Nature. This book was released on 2019-11-13 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents chemical and biological methods to convert carbon dioxide into various products such as methanol, ethanol, formic acid, formaldehyde, volatile organic compounds, syngas and polymers.
Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
Download or read book Preliminary Screening Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass Derived Syngas written by and published by DIANE Publishing. This book was released on with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gaseous Carbon Waste Streams Utilization written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-02-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.
Download or read book The Changing Landscape of Hydrocarbon Feedstocks for Chemical Production written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-12-10 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: A decade ago, the U.S. chemical industry was in decline. Of the more than 40 chemical manufacturing plants being built worldwide in the mid-2000s with more than $1 billion in capitalization, none were under construction in the United States. Today, as a result of abundant domestic supplies of affordable natural gas and natural gas liquids resulting from the dramatic rise in shale gas production, the U.S. chemical industry has gone from the world's highest-cost producer in 2005 to among the lowest-cost producers today. The low cost and increased supply of natural gas and natural gas liquids provides an opportunity to discover and develop new catalysts and processes to enable the direct conversion of natural gas and natural gas liquids into value-added chemicals with a lower carbon footprint. The economic implications of developing advanced technologies to utilize and process natural gas and natural gas liquids for chemical production could be significant, as commodity, intermediate, and fine chemicals represent a higher-economic-value use of shale gas compared with its use as a fuel. To better understand the opportunities for catalysis research in an era of shifting feedstocks for chemical production and to identify the gaps in the current research portfolio, the National Academies of Sciences, Engineering, and Medicine conducted an interactive, multidisciplinary workshop in March 2016. The goal of this workshop was to identify advances in catalysis that can enable the United States to fully realize the potential of the shale gas revolution for the U.S. chemical industry and, as a result, to help target the efforts of U.S. researchers and funding agencies on those areas of science and technology development that are most critical to achieving these advances. This publication summarizes the presentations and discussions from the workshop.
Download or read book Industrial Chemicals Via C1 Processes written by Darryl R. Fahey and published by . This book was released on 1987 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fischer Tropsch Synthesis Catalysts and Catalysis written by Burtron H. Davis and published by CRC Press. This book was released on 2016-04-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a symposium held during the 248th American Chemical Society meeting that focused on use of the Fischer-Tropsch process in producing synthetic fuels. Its contents reflect the four dominant subjects of the meeting: catalyst preparation and activation, catalyst activity and reaction mechanisms, catalyst characterization and related reactions, and topics concerning commercializing the Fischer-Tropsch process. It covers recent developments related to renewable resources and green energy and provides a glimpse of the commercial potential of the Fischer-Tropsch process in synthetic fuel production.
Download or read book Thermochemical Conversion of Biomass to Liquid Fuels and Chemicals written by Mark Crocker and published by Royal Society of Chemistry. This book was released on 2010 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date overview on the conversion of thermochemical biomass to fuels and chemicals is written by experts in the field.
Download or read book Direct Natural Gas Conversion to Value Added Chemicals written by Jianli Hu and published by CRC Press. This book was released on 2020-09-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Natural Gas Conversion to Value-Added Chemicals comprehensively discusses all major aspects of natural gas conversion and introduces a broad spectrum of recent technological developments. Specifically, the book describes heterogeneous and homogeneous catalysis, microwave-assisted conversion, non-thermal plasma conversion, electrochemical conversion, and novel chemical looping conversion approaches. Provides an excellent benchmark resource for the industry and academics Appeals to experienced researchers as well as newcomers to the field, despite the variety of contributing authors and the complexity of the material covered Includes all aspects of direct natural gas conversion: fundamental chemistry, different routes of conversion, catalysts, catalyst deactivation, reaction engineering, novel conversion concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development Discusses new developments in natural gas conversion and future challenges and opportunities This book is as an excellent resource for advanced students, technology developers, and researchers in chemical engineering, industrial chemistry, and others interested in the conversion of natural gas.
Download or read book New and Future Developments in Catalysis written by M. Gupta and published by Elsevier Inc. Chapters. This book was released on 2013-07-17 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow. The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable. These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Download or read book Catalysis in Petrochemical Processes written by M.S. Matar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of petrochemicals started some years ago with the simple addition reaction of water to propylene for the production of isopropyl alcohol. Currently, the petrochemical industry has become a multi-billion dollar enterprise which encompasses a wide field of chemical products. Almost all the basic organic reactions such as hydrogenation, alkylation, substitution, polymerization, etc. are utilized for the production of these chemicals. It may not, however, have been possible to establish this huge industry without the use of different catalysts. In other words, the great advancements in the catalytic area have supported the vast developments in the petrochemical field. In this book, we have adopted the idea of discussing the petrochemical industry from the point of view of reactants' activities and susceptibilities toward different catalysts. The book is thus classified according to the reaction type. This will eriable students and other users of the book to base their understanding of the petrochemical field on the fundamental principles learned in chemistry. How ever, the first chapter is aimed at establishing some basic facts on the petro chemical industry and its major uses. It discusses, without going into details, the raw materials used, the intermediates and the downstream products. The next eight chapters discuss in some detail the main reactions and the catalysts used for the production of chemicals and polymers from petroleum. The last chapter is devoted to a discussion of some of the practical techniques used in the catalytic field.
