Download or read book Catalyst Immobilization Techniques for Continuous Flow Synthesis written by Kevin David Nagy and published by . This book was released on 2011 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic processes are ubiquitous in both research and industrial settings. As continuous flow processes continue to gain traction in research labs and fine and pharmaceutical chemical processes, new opportunities exist for implementing previously difficult catalytic transformations. The major goal of this thesis is to expand and evaluate techniques for immobilized catalyst systems relevant to continuous flow. Fundamental studies in characterizing mixing, dispersion, and residence time distributions in small scale continuous flow systems are also presented. Given the numerous benefits associated with studying chemical processes at small length scales, microfluidic devices are the tool of choice for most studies in this thesis. Thermomorphic solvents offer the potential for homogeneous catalytic processes with biphasic catalyst recovery and recycle. A major limitation of these processes is the number of synthetically useful thermomorphic solvent combinations demonstrated in literature. A screening program using the modified UNIFAC (Dortmund) activity coefficient model to evaluate phase splitting behavior has been developed to predict thermomorphic behavior. Calculation of 861 binary solvent combinations results in 43 potential thermomorphic and 44 biphasic solvent combinations. Extension of the program to ternary solvents resulted in a new class of ternary solvents that display thermomorphic behavior with tunable critical solution temperatures. Evaluation of thermomorphic processes as a general method is presented. Traditional catalyst immobilization techniques rely on covalent grafting and are well suited to continuous flow processing due to the strong interactions of the catalyst to the support. Fluorous physisorption, which relies on interactions between a fluorous support and a fluorous-tagged catalyst, is characterized and presented as an immobilization technique for flow chemistry. The use of a fluorous-tagged Co(III)-salen catalyst to effect the ring opening of epoxyhexane with water is presented. Application of the platform to the ring closing metathesis of N, Ndiallyltosylamide using a fluorous-tagged Hoveyda-Grubbs metathesis catalyst results in significantly accelerated loss of activity over time compared to the salen catalyst. Use of continuous flow selective adsorption reactors to enhance catalytic processes is presented. Continuous feeds of a homogeneous catalyst into a sorbent where the catalyst displays an affinity for the sorbent results in accumulation of the catalyst in the packed bed. The net effect is an enhancement in turnover frequency and turnover number relative to homogeneous flow. Application of this platform to a Lewis acid catalyzed Diels-Alder reaction results in an order of magnitude improvement in turnover frequency compared to batch and homogeneous flow.
Download or read book Catalyst Immobilization written by Maurizio Benaglia and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource on techniques and applications for immobilizing catalysts Catalyst Immobilization: Methods and Applications covers catalyst immobilization topics including technologies, materials, characterization, chemical activity, and recyclability. The book also presents innovative applications for supported catalysts, such as flow chemistry and machine-assisted organic synthesis. Written by an international panel of expert contributors, this book outlines the general principles of catalyst immobilization and explores different types of supports employed in catalyst heterogenization. The book?s chapters examine the immobilization of chiral organocatalysts, reactions in flow reactors, 3D printed devices for catalytic systems, and more. Catalyst Immobilization offers a modern vision and a broad and critical view of this exciting field. This important book: -Offers a guide to supported and therefore recyclable catalysts, which is one of the most important tools for developing a highly sustainable chemistry -Presents various immobilization techniques and applications -Explores new trends, such as 3D printed devices for catalytic systems -Contains information from a leading international team of authors Written for catalytic chemists, organic chemists, process engineers, biochemists, surface chemists, materials scientists, analytical chemists, Catalyst Immobilization: Methods and Applications presents the latest developments and includes a review of the innovative trends such as flow chemistry, reactions in microreactors, and beyond.
Download or read book Immobilized Catalysts written by Andreas Kirschning and published by Springer Science & Business Media. This book was released on 2004-11-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: R. Haag, S. Roller: Polymeric Supports for the Immobilisation of Catalysts .- J. Horn, F. Michalek, C.C. Tzschucke, W. Bannwarth: Non-Covalently Solid-Phase Bound Catalysts for Organic Synthesis .- Y. Uozumi: Recent Progress in Polymeric Palladium Catalysts for Organic Synthesis .- D.E. Bergbreiter, J. Li: Applications of Catalysts on Soluble Supports .- B. Desai, C.O. Kappe: Microwave-Assisted Synthesis Involving Immobilized Catalysts .- A. Kirschning, G. Jas: Applications of Immobilized Catalysts in Continuous Flow Processes .- N. End, K.-U. Schöning: Immobilized Catalysts in Industrial Research and Application .- N. End, K.-U. Schöning: Immobilized Biocatalysts in Industrial Research and Production
Download or read book Continuous flow Synthesis of Fine Chemicals and Pharmaceutical Compounds Over Intelligent Organocatalysts with Bifunctional Reactivity written by Abdo Alslam Ali Abdo Alslam Alwakwak and published by . This book was released on 2020 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Many biological systems that utilize organic active sites to catalyze reactions under mild conditions invoke cooperative catalytic pathways, whereby two or more active sites work together to activate the reactant(s). The use of cooperative (bifunctional) catalysts and continuous flow chemistry (a reaction within the narrow channels of a micro- or microfluidic reactor) are commonplace in sustainable chemical transformation and attract a great deal of interest with respect to economic and environmentally-sustainable production of fine chemicals, pharmaceuticals, and agrochemicals, water treatment, as well as upgrading of biomass feedstocks. Although, some methods have been developed for immobilization of bifunctional catalysts for cooperative interactions within microfluidic reactors, the catalyst stability is still hampered by linker/support decomposition and active species leaching from the support/reactor to the product stream which are a major challenge for successful transferring batch chemistries to continuous flow reactions. The overall goal of this research was to overcome the catalyst leaching and product contamination problems by covalently bonding homogeneous organocatalysts on polymeric hollow fiber surfaces as a new, low-cost technique to create and engineer composite hollow fibers that can be used as a heterogeneous catalyst and continuous-flow microfluidic reactor. Specifically, this work developed a method for immobilization of bi- and tri-functional organocatalysts on porous polyamide-imide hollow fibers (PAIHFs) and demonstrated their application as heterogeneous catalysts and continuous-flow microfluidic reactors for chemical transformation"--Abstract, page iv.
Download or read book Multistep Continuous Flow Synthesis of Fine Chemicals with Heterogeneous Catalysts written by Yuki Saito and published by Springer. This book was released on 2022-12-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of two kinds of continuous-flow transformation using heterogeneous catalysts, and explains how they can be applied in the multistep synthesis of active pharmaceutical ingredients. It demonstrates and proves that fine chemicals can be synthesized under continuous-flow conditions using heterogeneous catalysis alone. Importantly, the book also proposes a general concept and strategy for achieving multistep flow synthesis and developing heterogeneous catalysts, and shows that commercially available anion exchange resin can be used as a water-tolerant strong base catalyst for various types of continuous-flow aldol-type reaction. Reviewing the state of the art in heterogeneous catalysis in flow chemistry – a “hot topic” and rapidly developing area of organic synthesis – the book will provide readers with a deeper understanding of fine chemical flow synthesis and its future prospects.
Download or read book Flow Chemistry Applications written by Ferenc Darvas and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-11-18 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Flow Chemistry fills the gap in graduate education by covering chemistry and reaction principles along with current practice, including examples of relevant commercial reaction, separation, automation, and analytical equipment. The Editors of Flow Chemistry are commended for having taken the initiative to bring together experts from the field to provide a comprehensive treatment of fundamental and practical considerations underlying flow chemistry. It promises to become a useful study text and as well as reference for the graduate students and practitioners of flow chemistry." Professor Klavs Jensen Massachusetts Institute of Technology, USA Broader theoretical insight in driving a chemical reaction automatically opens the window towards new technologies particularly to flow chemistry. This emerging concept promotes the transformation of present day's organic processes into a more rapid continuous set of synthesis operations, more compatible with the envisioned sustainable world. These two volumes Fundamentals and Applications provide both the theoretical foundation as well as the practical aspects.
Download or read book Recoverable and Recyclable Catalysts written by Maurizio Benaglia and published by John Wiley & Sons. This book was released on 2009-08-31 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recoverable and Recyclable Catalysts There is continued pressure on chemical and pharmaceutical industries to reduce chemical waste and improve the selectivity and efficiency of synthetic processes. The need to implement green chemistry principles is a driving force towards the development of recoverable and recyclable catalysts. The design and synthesis of recoverable catalysts is a highly challenging interdisciplinary field combining chemistry, materials science engineering with economic and environmental objectives. Drawing on international research and highlighting recent developments, this book serves as a practical guide for both experts and newcomers to the field. Topics covered include: An introduction to the principles of catalyst recovery and recycling Catalysts on insoluble and soluble support materials Thermomorphic catalysts, self-supported catalysts and perfluorous catalytic systems The development of reusable organic catalysts Continuous flow and membrane reactors Each chapter combines principles with practical information on the synthesis of catalysts and strategies for catalyst recovery. The book concludes with a comparison of different catalytic systems, using case studies to illustrate the key features of each approach. Recoverable and Recyclable Catalysts is a valuable reference source for academic researchers and professionals from a range of pharmaceutical and chemical industries, particularly those working in catalysis, organic synthesis and sustainable chemistry.
Download or read book Microreactors in Organic Synthesis and Catalysis written by Thomas Wirth and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop reference is the first book on this emerging and rapid developing field with a focus on synthesis and catalysis. As such, it covers all aspects from academia and industry in a clearly structured way. Leading experts provide the background information as an initial aid for newcomers to the field, while chapters on different reaction types and industrial applications make this an equally vital resource for specialists.
Download or read book Biocatalysis for Practitioners written by Gonzalo de Gonzalo and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book originates from the interdisciplinary research cooperation between academia and industry. In three distinct parts, latest results from basic research on stable enzymes are explained and brought into context with possible industrial applications. Downstream processing technology as well as biocatalytic and biotechnological production processes from global players display the enormous potential of biocatalysts. Application of "extreme" reaction conditions (i.e. unconventional, such as high temperature, pressure, and pH value) - biocatalysts are normally used within a well defined process window - leads to novel synthetic effects. Both novel enzyme systems and the synthetic routes in which they can be applied are made accessible to the reader. In addition, the complementary innovative process technology under unconventional conditions is highlighted by latest examples from biotech industry.
Download or read book Polymeric Chiral Catalyst Design and Chiral Polymer Synthesis written by Shinichi Itsuno and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews chiral polymer synthesis and its application to asymmetric catalysis. It features the design and use of polymer-immobilized catalysts and methods for their design and synthesis. Chapters cover peptide-catalyzed and enantioselective synthesis, optically-active polymers, and continuous flow processes. It collects recent advances in an important field of polymer and organic chemistry, with leading researchers explaining applications in academic and industry R & D.
Download or read book Organometallic Flow Chemistry written by Timothy Noël and published by Springer. This book was released on 2016-04-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Organometallic Chemistry presents critical overviews of research results in organometallic chemistry. As our understanding of organometallic structure, properties and mechanisms increases, new ways are opened for the design of organometallic compounds and reactions tailored to the needs of such diverse areas as organic synthesis, medical research, biology and materials science. Thus the scope of coverage includes a broad range of topics of pure and applied organometallic chemistry, where new breakthroughs are being achieved that are of significance to a larger scientific audience. The individual volumes of Topics in Organometallic Chemistry are thematic. Review articles are generally invited by the volume editors. All chapters from Topics in Organometallic Chemistry are published OnlineFirst with an individual DOI. In references, Topics in Organometallic Chemistry is abbreviated as Top Organomet Chem and cited as a journal
Download or read book Multistep Continuous Flow Synthesis of Fine Chemicals with Heterogeneous Catalysts written by Yuki Saito and published by Springer Nature. This book was released on 2022-11-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of two kinds of continuous-flow transformation using heterogeneous catalysts, and explains how they can be applied in the multistep synthesis of active pharmaceutical ingredients. It demonstrates and proves that fine chemicals can be synthesized under continuous-flow conditions using heterogeneous catalysis alone. Importantly, the book also proposes a general concept and strategy for achieving multistep flow synthesis and developing heterogeneous catalysts, and shows that commercially available anion exchange resin can be used as a water-tolerant strong base catalyst for various types of continuous-flow aldol-type reaction. Reviewing the state of the art in heterogeneous catalysis in flow chemistry – a “hot topic” and rapidly developing area of organic synthesis – the book will provide readers with a deeper understanding of fine chemical flow synthesis and its future prospects.
Download or read book Modern Biocatalysis written by Gavin Williams and published by Royal Society of Chemistry. This book was released on 2018-05-31 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synergy between synthetic biology and biocatalysis is emerging as an important trend for future sustainable processes. This book reviews all modern and novel techniques successfully implemented in biocatalysis, in an effort to provide better performing enzymatic systems and novel biosynthetic routes to (non-)natural products. This includes the use of molecular techniques in protein design and engineering, construction of artificial metabolic pathways, and application of computational methods for enzyme discovery and design. Stress is placed on current ‘hot’ topics in biocatalysis, where recent advances in research are defining new grounds in enzyme-catalyzed processes. With contributions from leading academics around the world, this book makes a ground-breaking contribution to this progressive field and is essential reading for graduates and researchers investigating (bio)catalysis, enzyme engineering, chemical biology, and synthetic biology.
Download or read book Biocatalysis written by Gonzalo de Gonzalo and published by Royal Society of Chemistry. This book was released on 2017-11-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implementing biocatalytic strategies in an industrial setting at a commercial scale is a challenging task, necessitating a balance between industrial need against economic viability. With invited contributions from small and large-scale chemical and pharmaceutical companies, this book bridges the gap between academia and industry. Contributors discuss current processes, types of biocatalysts and improvements, industrial motivation and key aspects to economically succeed. With its focus on industry related issues, this book will be a useful tool for future research by both practitioners and academics.
Download or read book Novel Process Windows written by Volker Hessel and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of novel process windows, focusing on cost improvements, safety, energy and eco-efficiency throughout each step of the process. The first part presents the new reactor and process-related technologies, introducing the potential and benefit analysis. The core of the book details scenarios for unusual parameter sets and the new holistic and systemic approach to processing, while the final part analyses the implications for green and cost-efficient processing. With its practical approach, this is invaluable reading for those working in the pharmaceutical, fine chemicals, fuels and oils industries.
Download or read book Immobilized Enzymes Research and Development written by Ichirō Chibata and published by Halsted Press. This book was released on 1978 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Visible Light Photocatalysis in Organic Chemistry written by Corey R.J. Stephenson and published by John Wiley & Sons. This book was released on 2018-05-29 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the need for a ready reference that reflects the vast developments in this field, this book presents everything from fundamentals, applications, various reaction types, and technical applications. Edited by rising stars in the scientific community, the text focuses solely on visible light photocatalysis in the context of organic chemistry. This primarily entails photoinduced electron transfer and energy transfer chemistry sensitized by polypyridyl complexes, yet also includes the use of organic dyes and heterogeneous catalysts. A valuable resource to the synthetic organic community, polymer and medicinal chemists, as well as industry professionals.
