Download or read book Deactivation and Regeneration of Zeolite Catalysts written by M. Guisnet and published by World Scientific. This book was released on 2011 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chemical processes, the progressive deactivation of solid catalysts is a major economic concern and mastering their stability has become as essential as controlling their activity and selectivity. For these reasons, there is a strong motivation to understand the mechanisms leading to any loss in activity and/or selectivity and to find out the efficient preventive measures and regenerative solutions that open the way towards cheaper and cleaner processes. This book covers in a comprehensive way both the fundamental and applied aspects of solid catalyst deactivation and encompasses the state-of-the-art in the field of reactions catalyzed by zeolites. This particular choice is justified by the widespread use of molecular sieves in refining, petrochemicals and organic chemicals synthesis processes, by the large variety in the nature of their active sites (acid, base, acid-base, redox, bifunctional) and especially by their peculiar features, in terms of crystallinity, structural order and textural properties, which make them ideal models for heterogeneous catalysis. The aim of this book is to be a critical review in the field of zeolite deactivation and regeneration, by collecting a series of contributions by experts in the field which describe the factors, explain the techniques to study the causes and suggest methods to prevent (or limit) catalyst deactivation. At the same time, an anthology of commercial processes and exemplar cases provides the reader with theoretical insights and practical hints on the deactivation mechanisms and draws attention to the key role played by the loss of activity on process design and industrial practice.
Download or read book Catalysts Deactivation Poisoning and Regeneration written by Luciana Lisi and published by MDPI. This book was released on 2019-10-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst lifetime represents one of the most crucial economic aspects in industrial catalytic processes, due to costly shutdowns, catalyst replacements, and proper disposal of spent materials. Not surprisingly, there is considerable motivation to understand and treat catalyst deactivation, poisoning, and regeneration, which causes this research topic to continue to grow. The complexity of catalyst poisoning obviously increases along with the increasing use of biomass/waste-derived/residual feedstocks and with requirements for cleaner and novel sustainable processes. This book collects 15 research papers providing insights into several scientific and technical aspects of catalyst poisoning and deactivation, proposing more tolerant catalyst formulations, and exploring possible regeneration strategies.
Download or read book Activation Deactivation and Poisoning of Catalysts written by John B. Butt and published by . This book was released on 1988 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deactivation and Poisoning of Catalysts written by J. Oudar and published by CRC Press. This book was released on 1985-07-02 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deactivation and Poisoning of Catalysts presents the most current research in the area of heterogeneous catalysis. It focuses on the chemically induced effects associated with bonded surface species that cause catalyst activity decline -- and in some cases a change in catalyst specificity. In addition, this volume examines poisoning of dispersed metal catalysts ... the thermodynamics of sulfur-metal and carbon-metal interactions ... model poisoning reactions on single crystals ... deactivation in petroleum refining and petrochemical processes ... coking of metal catalysts ... and more. The new approaches and solutions to catalyst deactivation and poisoning presented in this guide are invaluable to all heterogeneous catalysis specialists, including chemical and petroleum engineers, and surface, synthetic, physical, and industrial chemists. Book jacket.
Download or read book Basic Principles in Applied Catalysis written by Manfred Baerns and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of internationally recognized experts, this book addresses the most important types of catalytic reactions and catalysts as used in industrial practice. Both applied aspects and the essential scientific principles are described. The main topics can be summarized as follows: heterogeneous, homogeneous and biocatalysis, catalyst preparation and characterization, catalytic reaction engineering and kinetics, catalyst deactivation and industrial perspective.
Download or read book Deactivation And Regeneration Of Zeolite Catalysts written by Guisnet Michel and published by World Scientific Publishing Company. This book was released on 2011-02-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chemical processes, the progressive deactivation of solid catalysts is a major economic concern and mastering their stability has become as essential as controlling their activity and selectivity. For these reasons, there is a strong motivation to understand the mechanisms leading to any loss in activity and/or selectivity and to find out the efficient preventive measures and regenerative solutions that open the way towards cheaper and cleaner processes. This book covers the fundamental and applied aspects of solid catalyst deactivation in a comprehensive way and encompasses the state of the art in the field of reactions catalyzed by zeolites. This particular choice is justified by the widespread use of molecular sieves in refining, petrochemicals and organic chemicals synthesis processes, by the large variety in the nature of their active sites (acid, base, acid-base, redox, bifunctional) and especially by their peculiar features, in terms of crystallinity, structural order and textural properties, which make them ideal models for heterogeneous catalysis. The aim of this book is to be a critical review in the field of zeolite deactivation and regeneration by collecting contributions from experts in the field which describe the factors, explain the techniques to study the causes and suggest methods to prevent (or limit) catalyst deactivation. At the same time, a selection of commercial processes and exemplar cases provides the reader with theoretical insights and practical hints on the deactivation mechanisms and draws attention to the key role played by the loss of activity on process design and industrial practice./a
Download or read book Regeneration of Spent Catalyst and Impregnation of Catalyst by Supercritical Fluid written by Farid Gumerov and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A catalyst is a material of constant composition, which accelerates the rate of a chemical reaction by providing a suitable reaction pathway with the lowest activation energy. As the activation energy is lower, more reaction products are formed in the same period of time. Most catalytic reactions encountered in hydrocarbon processing are carried out with porous catalysts to provide a sufficient surface area for the metal dispersion and the ensuing reaction. These catalysts gradually lose their catalytic activity, usually through structural changes, poisoning, or the deposit of extraneous material. A catalyst which can no longer exhibit the necessary activity and/or is specificity required by the user is referred to as a "spent catalyst". Catalysts are critical to the chemical industry and are now used in most industrial chemical processes. Along with the rapid development and wide application of catalysis technology, the amounts of different spent catalysts are increased from year to year. The physical properties of spent catalysts, as well as their composition, are generally different from those of fresh catalysts. For example, spent hydrotreating catalysts contain metal sulfides and coke, and may have additional contaminants that were not present in the fresh catalyst. Catalyst regeneration involves the processing of spent catalysts in order to make them reusable. This is done by restoring the initial properties of spent catalysts and thus restoring their efficiency through a process called regeneration of catalysts. Traditional methods of vapor-air regeneration are energy-consuming and severely limit the number of regeneration cycles. Using supercritical fluid CO2-extraction process, according to some estimates, provides a two-fold energy savings and an increasing number of regeneration cycles possible. This book gathers a series of studies describing new methods for the regeneration of heterogeneous catalysts for important industrial chemical processes. In this book we propose new extraction techniques using supercritical fluid extraction (SFC), which seems to be one of the most promising as a green reaction medium. The feasibility of using supercritical fluid СО2 extraction process was investigated in particular for spent catalyst regeneration. The low regeneration temperature of supercritical carbon dioxide eliminates the risk of thermal deterioration of the catalyst (namely the collapse of the pores), prevents the reduction of the surface area and the sintering, and allows regeneration of catalysts with an activity close to that of fresh catalysts. The results of the implementation of the supercritical fluid СО2 extraction process with respect to samples of industrial deactivated catalysts are provided. A comparison of the characteristics of the regenerated catalyst samples by traditional approaches and the SC-CO2 extraction process is carried out. The possibility of using a supercritical fluid CO2 impregnation technique in the synthesis of a palladium catalyst is also studied.
Download or read book Activation Deactivation and Poisoning of Catalysts written by John Butt and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activation, Deactivation, and Poisoning of Catalysts deals with the circumstances and mechanisms underlying catalyst activation, deactivation, and poisoning. The emphasis is on the techniques for handling deactivating systems, not on results per se. Deactivation by fouling and sintering is given consideration. This book is organized into three sections and consists of 12 chapters. The first part is devoted to a systematic development of the manner in which catalysts are activated, deactivated, poisoned, and in some cases reactivated on a microscopic basis. The first chapter explains the concept of the active center as utilized in catalysis, along with catalyst regeneration, rejuvenation, and detoxification. In the second part, the reader is introduced to the problem of heat transfer as well as the transport of reactants and products in the interior of the particle coupled with chemical reaction therein. The macroscopic deactivation behavior of the catalyst particle is described in terms of fundamental kinetic deactivation phenomena and of parameters governing heat and mass transfer. The last part is primarily concerned with a collection of catalyst particles within the reactor, with emphasis on the global activity of the reactor. In the last chapter, a pragmatic approach is presented to predict the design and performance of chemical reactors containing a deactivating catalyst. This book is written for catalytic chemists, researchers, reactor designers, and students interested in catalyst activation, deactivation, and poisoning.
Download or read book Handbook of Commercial Catalysts written by Howard F. Rase and published by CRC Press. This book was released on 2016-04-05 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the advances in understanding the phenomena that occur on a catalyst surface, much of the successful catalyst development and use continues to be half science and half art. The art resides in the practical knowledge of experts in the development and use of commercial catalysts-it comes with experience. Now the background needed to nurture t
Download or read book Catalysts Deactivation Poisoning and Regeneration written by Luciana Lisi and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst lifetime represents one of the most crucial economic aspects in industrial catalytic processes, due to costly shutdowns, catalyst replacements, and proper disposal of spent materials. Not surprisingly, there is considerable motivation to understand and treat catalyst deactivation, poisoning, and regeneration, which causes this research topic to continue to grow. The complexity of catalyst poisoning obviously increases along with the increasing use of biomass/waste-derived/residual feedstocks and with requirements for cleaner and novel sustainable processes. This book collects 15 research papers providing insights into several scientific and technical aspects of catalyst poisoning and deactivation, proposing more tolerant catalyst formulations, and exploring possible regeneration strategies.
Download or read book Industrial Catalytic Processes for Fine and Specialty Chemicals written by Sunil S Joshi and published by Elsevier. This book was released on 2016-04-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Catalytic Processes for Fine and Specialty Chemicals provides a comprehensive methodology and state-of-the art toolbox for industrial catalysis. The book begins by introducing the reader to the interesting, challenging, and important field of catalysis and catalytic processes. The fundamentals of catalysis and catalytic processes are fully covered before delving into the important industrial applications of catalysis and catalytic processes, with an emphasis on green and sustainable technologies. Several case studies illustrate new and sustainable ways of designing catalysts and catalytic processes. The intended audience of the book includes researchers in academia and industry, as well as chemical engineers, process development chemists, and technologists working in chemical industries and industrial research laboratories. - Discusses the fundamentals of catalytic processes, catalyst preparation and characterization, and reaction engineering - Outlines the homogeneous catalytic processes as they apply to specialty chemicals - Introduces industrial catalysis and catalytic processes for fine chemicals - Includes a number of case studies to demonstrate the various processes and methods for designing green catalysts
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Hydroprocessing Catalysts And Processes The Challenges For Biofuels Production written by Bo Zhang and published by World Scientific. This book was released on 2018-04-09 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for hydroprocessing catalysts has shown an increasing trend, because of their applications in refining of petroleum and biofuels, in order to comply with strict environmental regulations controlling emissions from transportation vehicles.Transport fuel is dominated by fossil fuels with carbon emission intensive production methods. If we are to move away from these sources, the alternative is to produce liquid fuels from agricultural stocks — crops, crop waste, forestry waste or algae. Converting these feedstocks into high quality fuels is a considerable challenge.By describing the current status in processing agricultural feedstock into high quality liquid transport fuels, the authors set out the means to develop better chemistry and catalysis for the necessary conversion processes. This book offers an intriguing insight into the mechanisms and protocols involved in new hydroprocessing catalysts and processes, and covers the methods for upgrading these liquids to modern transport vehicles suitable for operation in modern gasoline and diesel engines.It provides an introduction to the mechanism of hydroprocessing reactions, application of different metals in hydroprocessing, the effect of catalyst supports, applications in refining new feedstock, renewable fuels standards, the management of spent hydroprocessing catalysts, and hydrogen production.Hydroprocessing Catalysts and Processes will prove useful for both researchers in academe and industry concerned with future fuels development and treatment to produce current and future liquid transport fuels.
Download or read book Fundamentals of Industrial Catalytic Processes written by Calvin H. Bartholomew and published by . This book was released on 2006-01-01 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Catalysis and Industrial Catalytic Processes written by Robert J. Farrauto and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces major catalytic processes including products from the petroleum, chemical, environmental and alternative energy industries Provides an easy to read description of the fundamentals of catalysis and some of the major catalytic industrial processes used today Offers a rationale for process designs based on kinetics and thermodynamics Alternative energy topics include the hydrogen economy, fuels cells, bio catalytic (enzymes) production of ethanol fuel from corn and biodiesel from vegetable oils Problem sets of included with answers available to faculty who use the book Review: "In less than 300 pages, it serves as an excellent introduction to these subjects whether for advanced students or those seeking to learn more about these subjects on their own time...Particularly useful are the succinct summaries throughout the book...excellent detail in the table of contents, a detailed index, key references at the end of each chapter, and challenging classroom questions..." (GlobalCatalysis.com, May 2016)
Download or read book Deactivation of Catalysts written by Ronald Hughes and published by . This book was released on 1984 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis by Ceria and Related Materials written by Alessandro Trovarelli and published by World Scientific. This book was released on 2013 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows the 2002 edition of Catalysis by Ceria and Related Materials, which was the first book entirely devoted to ceria and its catalytic properties. In the ten years since the first edition a massive amount of work has been carried out in the field, and ceria has gained a prominent position in catalysis as one of the most valuable material for several applications. This second edition covers fundamental and applied aspects of the latest advances in ceria-based materials with a special focus on structural, redox and catalytic features. Special emphasis is given to nano-engineered and nano-shaped systems which are a key factor in the predictive and rational design of ceria with novel properties.In addition, the book presents recent advances in emerging and traditional large-scale applications of ceria in catalysis, such as the treatment of emissions from mobile sources (including diesel and gasoline engines). The primary readership includes catalysis and material science researchers from academy and industry and postdoctorate and graduate students in chemistry, chemical engineering and physics.
