Download or read book Case Studies of Liquefaction and Lifeline Performance During Past Earthquakes written by Masanori Hamada and published by . This book was released on 1992 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Earthquake Engineering written by Ikuo Towhata and published by Springer Science & Business Media. This book was released on 2008-12-19 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new book examines the issues of earthquake geotechnical engineering in a comprehensive way. It summarizes the present knowledge on earthquake hazards and their causative mechanisms as well as a number of other relevant topics. Information obtained from earthquake damage investigation (such as ground motion, landslides, earth pressure, fault action, or liquefaction) as well as data from laboratory tests and field investigation is supplied, together with exercises/questions.
Download or read book Earthquake Engineering written by Alberto Bernal and published by CRC Press. This book was released on 1992-01-01 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The official proceedings of the 10th world conference on earthquake engineering in Madrid. Coverage includes damage in recent earthquakes, seismic risk and hazard, site effects, structural analysis and design, seismic codes and standards, urban planning, and expert system application.
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Research Accomplishments 1986 1994 written by National Center for Earthquake Engineering Research (U.S.) and published by . This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design and Performance written by T.G. Sitharam and published by Springer Nature. This book was released on 2021-03-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents select papers presented at the 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. The papers discuss advances in the fields of soil dynamics and geotechnical earthquake engineering. Some of the themes include seismic design of deep & shallow foundations, soil structure interaction under dynamic loading, marine structures, etc. A strong emphasis is placed on connecting academic research and field practice, with many examples, case studies, best practices, and discussions on performance based design. This volume will be of interest to researchers and practicing engineers alike.
Download or read book Earthquake Engineering and Disaster Mitigation written by Ravi S. Jakka and published by Springer Nature. This book was released on 2023-04-21 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been brought out in remembrance of Prof. DK Paul who has contributed immensely to the domain of Earthquake Engineering and Earthquake Disaster Mitigation. Prof. Paul was a leading authority in this field and has made significant contributions in Earthquake Resistant Analysis as well as Design of various special structures, which resulted in earthquake disaster reduction in India. This book comprises recent diverse topics on earthquake engineering and disaster mitigation. The chapters are of interest to readers, as the different chapters will elaborate popular topics on various aspects of earthquake engineering and disaster management. Substantial research work has been carried out in the domain of earthquake engineering for understanding the underlying phenomena as well as to attain relevance in mitigating disaster. Under overarching umbrella of earthquake engineering and technology, systematic categorization of various ongoing research details pertaining to earthquake engineering and disaster management has been introduced in this book. The chapters appended in this book not only comprise detailed understanding of the responses of soil and structure under the implications of seismic loading but also address some of the innovative ways to cater the implications of severe loading conditions. Further, this book also introduces specific case studies pertaining to various regions of India, which will aid the readers to attain a detailed idea about the seismic aspects of those regions in order to undergo further research. This also aids in mitigating potential hazards due to future earthquakes in terms of taking proper remedial measures. The appended chapters comprise in-depth knowledge about several aspects on earthquake engineering such as nonlinear seismic response of both superstructures and embedded structures, design spectrum, amplification prediction, simulation with the aid of stochastic approaches, seismic performance of structures as well as earthquake induced disasters. The aforementioned wide-ranging topics pertaining to earthquake engineering and disaster management aid in substantial development in futuristic research and employ innovative ways to cater the needs of mitigating disasters. All the chapters consist of proper illustrations and tables which makes it easy to comprehend the vital concepts for the readers as well as aids in implementing new aspects in the field in addition to classroom learning.
Download or read book Fire Following Earthquake written by Charles Scawthorn and published by ASCE Publications. This book was released on 2005-01-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Technical Council on Lifeline Earthquake Engineering of ASCE. This TCLEE Monograph covers the entire range of fire following earthquake (FFE) issues, from historical fires to 20th-century fires in Kobe, San Francisco, Oakland, Berkeley, and Northridge. FFE has the potential of causing catastrophic losses in the United States, Japan, Canada, New Zealand, and other seismically active countries with wood houses. This comprehensive book on FFE and urban conflagrations provides state-of-the-practice insight on unique issues, such as large diameter flex hose applications by fire and water departments. Topics include: History of past fires; Computer modeling of fire spread in the post-earthquake urban environment; Concurrent damage and fire impacts for water, power gas, communication and transportation systems; Examples of reliable water systems built or designed in San Francisco, Vancouver, Berkeley, and Kyoto; Use of large diameter (5 in.) and ultralarge diameter (12 in.) flex hose for fire fighting and water restoration; and Cost-effectiveness of various FFE mitigation strategies, with a detailed benefit-cost model. Water utility engineers, fire fighting professionals, and emergency response planners will benefit from reading this book.
Download or read book Advances in Geotechnical Earthquake Engineering written by Abbas Moustafa and published by BoD – Books on Demand. This book was released on 2012-02-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds lights on recent advances in Geotechnical Earthquake Engineering with special emphasis on soil liquefaction, soil-structure interaction, seismic safety of dams and underground monuments, mitigation strategies against landslide and fire whirlwind resulting from earthquakes and vibration of a layered rotating plant and Bryan's effect. The book contains sixteen chapters covering several interesting research topics written by researchers and experts from several countries. The research reported in this book is useful to graduate students and researchers working in the fields of structural and earthquake engineering. The book will also be of considerable help to civil engineers working on construction and repair of engineering structures, such as buildings, roads, dams and monuments.
Download or read book Seismic Behaviour of Ground and Geotechnical Structures Special Volume of TC 4 written by Pedro S. Seco e Pinto and published by CRC Press. This book was released on 2021-05-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers from the Special Technical Session on Earthquake Geotechnical Engineering, this volume includes coverage of: zonation maps; liquefaction; side effects; ground motions; slope instability; seismic behaviour of slopes; dikes and dams; and warning systems.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-10-22 with total page 5946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Innovative Earthquake Soil Dynamics written by Takaji Kokusho and published by CRC Press. This book was released on 2017-07-28 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Earthquake Soil Dynamics deals with soil dynamics in earthquake engineering and includes almost all aspects of soil behavior. Both generally accepted basic knowledge as well as advanced and innovative views are accommodated. Major topics are (i) seismic site amplification, (ii) liquefaction and (iii) earthquake-induced slope failure. Associated with the above, basic theories and knowledge on wave propagation/attenuation, soil properties, laboratory tests, numerical analyses, and model tests are addressed in the first part of the book. A great number of earthquake observations in surface soil deposits as well as case histories with new findings are addressed in the later chapters, together with associated laboratory test data. Most of the research results originate from Japan, which is rich in earthquake records and case histories, although mostly isolated from the outside world because of the language barrier. Another important feature characterizing this book is an energy perspective in addition to the force-equilibrium perspective, because it is the author’s strong belief that energy is a very relevant index in determining seismic failures, particularly of soils and soil structures. Innovative Earthquake Soil Dynamics is written for international readers, graduate students, researchers, and practicing engineers, interested in this field.
Download or read book U S Geological Survey Open file Report written by and published by . This book was released on 1993 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Engineering Handbook written by Charles Scawthorn and published by CRC Press. This book was released on 2002-09-27 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are nearly unique among natural phenomena - they affect virtually everything within a region, from massive buildings and bridges, down to the furnishings within a home. Successful earthquake engineering therefore requires a broad background in subjects, ranging from the geologic causes and effects of earthquakes to understanding the imp
Download or read book Engineering for Earthquake Disaster Mitigation written by Masanori Hamada and published by Springer. This book was released on 2014-06-04 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake and tsunami disasters have been increasing rapidly and globally in the last quarter-century. The purpose of this book is to provide essential knowledge and information on the mitigation of earthquakes and tsunamis for graduate students, young researchers, and geotechnical engineers. It begins by presenting recent cases of earthquakes that have occurred in the world, referring to tsunamis and soil liquefaction and how to cope with such disasters. The final chapter proposes strategies for disaster mitigation against in Japan earthquakes and tsunamis in the future.
Download or read book Fundamentals of Seismic Loading on Structures written by Tapan K. Sen and published by John Wiley & Sons. This book was released on 2009-04-29 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide to the basic essentials of earthquake engineering with a focus on seismic loading and structural design. Benefiting from the author’s extensive career in structural and earthquake engineering, dynamic analysis and lecturing, it is written from an industry perspective at a level suitable for graduate students. Fundamentals of Seismic Loading on Structures is organised into four major sections: introduction to earthquakes and related engineering problems, analysis, seismic loading, and design concepts. From a practical perspective, reviews linear and non-linear behaviour, introduces concepts of uniform hazard spectra, discusses loading provisions in design codes and examines soil-structure interaction issues, allowing the reader to quickly identify and implement information in a working environment. Discusses probabilistic methods that are widely employed in the assessment of seismic hazard, illustrating the use of Monte Carlo simulation with a number of worked examples. Summarises the latest developments in the field such as performance-based seismic engineering and advances in liquefaction research. “There are many books on earthquake engineering, but few are of direct use to the practising structural designer. This one, however, offers a new perspective, putting emphasis on the practical aspects of quantifying seismic loading, and explaining the importance of geotechnical effects during a major seismic event in readily understandable terms. The author has succeeded in marrying important seismological considerations with structural engineering practice, and this long-awaited book will find ready acceptance in the profession.” Professor Patrick J. Dowling CBE, DL, DSc, FIStructE, Hon MRIA, FIAE, FREng, FRS Chairman, British Association for the Advancement of Science Emeritus Professor and Retired Vice Chancellor, University of Surrey
Download or read book Design of Pile Foundations in Liquefiable Soils written by Gopal Madabhushi and published by World Scientific. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis.The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice.