Download or read book Biomaterials Artificial Organs and Tissue Engineering written by L Hench and published by Elsevier. This book was released on 2005-09-27 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining quality of life in an ageing population is one of the great challenges of the 21st Century. This book summarises how this challenge is being met by multi-disciplinary developments of specialty biomaterials, devices, artificial organs and in-vitro growth of human cells as tissue engineered constructs.Biomaterials, Artificial Organs and Tissue Engineering is intended for use as a textbook in a one semester course for upper level BS, MS and Meng students. The 25 chapters are organized in five parts: Part one provides an introduction to living and man-made materials for the non-specialist; Part two is an overview of clinical applications of various biomaterials and devices; Part three summarises the bioengineering principles, materials and designs used in artificial organs; Part four presents the concepts, cell techniques, scaffold materials and applications of tissue engineering; Part five provides an overview of the complex socio-economic factors involved in technology based healthcare, including regulatory controls, technology transfer processes and ethical issues. - Comprehensive introduction to living and man-made materials - Looks at clinical applications of various biomaterials and devices - Bioengineering principles, materials and designs used in artificial organs are summarised

Download or read book Cardiovascular Computing Methodologies and Clinical Applications written by Spyretta Golemati and published by Springer. This book was released on 2019-02-12 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the state-of-the-art in cardiovascular computing and highlights novel directions and challenges in this constantly evolving multidisciplinary field. The topics covered span a wide range of methods and clinical applications of cardiovascular computing, including advanced technologies for the acquisition and analysis of signals and images, cardiovascular informatics, and mathematical and computational modeling.

Download or read book Bioinspired Structures and Design written by Wole Soboyejo and published by Cambridge University Press. This book was released on 2020-09-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master simple to advanced biomaterials and structures with this essential text. Featuring topics ranging from bionanoengineered materials to bio-inspired structures for spacecraft and bio-inspired robots, and covering issues such as motility, sensing, control and morphology, this highly illustrated text walks the reader through key scientific and practical engineering principles, discussing properties, applications and design. Presenting case studies for the design of materials and structures at the nano, micro, meso and macro-scales, and written by some of the leading experts on the subject, this is the ideal introduction to this emerging field for students in engineering and science as well as researchers.

Download or read book Organ Manufacturing written by Xiaohong Wang and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first time that human organs, such as the heart, liver, kidney, stomach, uterus, skin, lung, pancreas and breast can be manufactured automatically and precisely for clinical transplantation, drug screening and metabolism model establishment. Headed by Professor Xiaohong Wang (also the founder and director) in the Center of Organ Manufacturing, Department of Mechanical Engineering, Tsinghua University, this group has focused on organ manufacturing for over ten years. A series of technical bottleneck problems, such as vascular and nerve system establishment in a construct, multiple cell types and material system incorporation, and stem cell sequential engagement, have been overcome one by one. Two technical approaches have been exploited extensively. One is multiple nozzle rapid prototyping (RP), additive manufacturing (AM), or three-dimension (3D) printing. The other is combined mold systems. More than 110 articles and 40 patents with a series of theories and practices have been published consequently. In the future, all the failed organs (including the brain) in the human body can be substituted easily like a small accessory part in a car. Everyone can get benefit from these techniques, which ultimately means that the lifespan of humans, therefore, can be greatly prolonged from this time point. This book examines the progress made in the field and the developments made by these researchers (and authors) in the field.

Download or read book Biomaterials for Artificial Organs written by Michael Lysaght and published by Elsevier. This book was released on 2010-12-20 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The worldwide demand for organ transplants far exceeds available donor organs. Consequently some patients die whilst waiting for a transplant. Synthetic alternatives are therefore imperative to improve the quality of, and in some cases, save people's lives. Advances in biomaterials have generated a range of materials and devices for use either outside the body or through implantation to replace or assist functions which may have been lost through disease or injury. Biomaterials for artificial organs reviews the latest developments in biomaterials and investigates how they can be used to improve the quality and efficiency of artificial organs.Part one discusses commodity biomaterials including membranes for oxygenators and plasmafilters, titanium and cobalt chromium alloys for hips and knees, polymeric joint-bearing surfaces for total joint replacements, biomaterials for pacemakers, defibrillators and neurostimulators and mechanical and bioprosthetic heart valves. Part two goes on to investigate advanced and next generation biomaterials including small intestinal submucosa and other decullarized matrix biomaterials for tissue repair, new ceramics and composites for joint replacement surgery, biomaterials for improving the blood and tissue compatibility of total artificial hearts (TAH) and ventricular assist devices (VAD), nanostructured biomaterials for artificial tissues and organs and matrices for tissue engineering and regenerative medicine.With its distinguished editors and international team of contributors Biomaterials for artificial organs is an invaluable resource to researchers, scientists and academics concerned with the advancement of artificial organs. - Reviews the latest developments in biomaterials and investigates how they can be used to improve the quality and efficiency of artificial organs - Discusses commodity biomaterials including membranes for oxygenators and cobalt chromium alloys for hips and knees and polymeric joint-bearing surfaces for total joint replacements - Further biomaterials utilised in pacemakers, defibrillators, neurostimulators and mechanical and bioprosthetic heart valve are also explored

Download or read book Artificial Hearts written by Shelley McKellar and published by JHU Press. This book was released on 2018 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fighting heart disease with machines and devices-- Multiple approaches to building artificial hearts : technological optimism and political support in the early years -- Dispute and disappointment : heart transplantation and total artificial heart implant cases in the 1960s -- Technology and risk : nuclear-powered artificial hearts and medical device regulation -- Media spotlight : the Utah total artificial heart -- Clinical and commercial rewards : ventricular assist devices -- Securing a place : therapeutic clout and second-generation VADs -- Artificial hearts in the 21st century

Download or read book Tissue Engineering for Artificial Organs 2 Volume Set written by Anwarul Hasan and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the latest achievements, trends, and the current state of the art of this important and rapidly expanding field. Clearly and logically structured, the first part of the book explores the fundamentals of tissue engineering, providing a separate chapter on each of the basic topics, including biomaterials stem cells, biosensors and bioreactors. The second part then follows a more applied approach, discussing various applications of tissue engineering, such as the replacement or repairing of skins, cartilages, livers and blood vessels, to trachea, lungs and cardiac tissues, to musculoskeletal tissue engineering used for bones and ligaments as well as pancreas, kidney and neural tissue engineering for the brain. The book concludes with a look at future technological advances. An invaluable reading for entrants to the field in biomedical engineering as well as expert researchers and developers in industry.

Download or read book The Danger Within Us written by Jeanne Lenzer and published by Little, Brown. This book was released on 2017-12-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Did you know... Medical interventions have become the third leading cause of death in America. An estimated 10 percent of Americans are implanted with medical devices -- like pacemakers, artificial hips, cardiac stents, etc. The overwhelming majority of high-risk implanted devices have never undergone a single clinical trial. In The Danger Within Us, award-winning journalist Jeanne Lenzer brings these horrifying statistics to life through the story of one working class man who, after his "cure" nearly kills him, ends up in a battle for justice against the medical establishment. His crusade leads Lenzer on a journey through the dark underbelly of the medical device industry, a fascinating and disturbing world that hasn't been written about before. What Lenzer exposes will shock readers: rampant corruption, elaborate cover-ups, shameless profiteering, and astonishing lack of oversight, all of which leads to dangerous devices (from artificial hips to pacemakers) going to market and into our bodies. In the vein of America's Bitter Pill and A Civil Action, The Danger Within Us is a stirring call for reform and a must-read for anyone who cares about the future of American healthcare. "Before you get anything implanted in your body, read this book."-Shannon Brownlee, author of Overtreated

Download or read book Mechanical Circulatory Support in End Stage Heart Failure written by Andrea Montalto and published by Springer. This book was released on 2017-07-14 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a detailed practical guide to the use of ventricular assist devices and total artificial hearts to provide mechanical circulatory support (MCS) in patients with end-stage heart failure. It explains why MCS may be indicated, which patients require MCS, when and how to implant ventricular assist devices or a total artificial heart, and how to avoid potential complications of MCS. Management throughout the period of care is described, from preimplantation to follow-up, and both typical and atypical cases are discussed. The text features numerous helpful tips and tricks relating to surgical and nonsurgical management and is supported by a wealth of high-quality illustrations that document the preoperative evaluation and implantation techniques. Heart transplantation remains the gold standard for the treatment of patients suffering from end-stage heart failure, but the shortage of donors has led to an increase in the use of MCS. This book will assist all physicians, and especially cardiologists and anesthesiologists, who are involved in the care of these patients.

Download or read book Polymeric Materials and Artificial Organs written by Charles G. Gebelein and published by . This book was released on 1984 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Artificial Human Joints Organs written by Subrata Pal and published by Springer Science & Business Media. This book was released on 2013-08-31 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​Design of Artificial Human Joints & Organs is intended to present the basics of the normal systems and how, due to aging, diseases or trauma, body parts may need to be replaced with manmade materials. The movement of the body generates forces in various work situations and also internally at various joints, muscles and ligaments. It is essential to figure out the forces, moments, pressure etc to design replacements that manage these stresses without breaking down. The mechanical characterization of the hard and the soft tissues are presented systematically using the principles of solid mechanics. The viscoelastic properties of the tissue will also discussed. This text covers the design science and methodology from concept to blueprint to the final component being replaced. Each chapter will be a brief overview of various joint/organ replacement systems. Engineers working on artificial joints and organs, as well as students of Mechanical Engineering and Biomedical Engineering are the main intended audience, however, the pedagogy is simple enough for those who are learning the subject for the first time.

Download or read book 3D Printing in Medicine and Surgery written by Daniel J. Thomas and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to engineer specific tissue types, experiments and methods, medical approaches and the challenges that lie ahead for future research. The book is an indispensable reference guide to the various methods used by current medical practitioners working at the forefront of 3D printing applications in medicine. - Provides a detailed introduction and narrative on how 3-D printing can be used towards developing future medicine-based therapies - Covers up-to-date methods across a range of application areas for the first time in book form - Presents the only book on all current areas of 3D printing in medicine that is catered to a medical rather than engineering audience

Download or read book Clinical Engineering Handbook written by Joseph F. Dyro and published by Academic Press. This book was released on 2004-08-27 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the biomedical engineering field expands throughout the world, clinical engineers play an ever more important role as the translator between the worlds of the medical, engineering, and business professionals. They influence procedure and policy at research facilities, universities and private and government agencies including the Food and Drug Administration and the World Health Organization. Clinical engineers were key players in calming the hysteria over electrical safety in the 1970s and Y2K at the turn of the century and continue to work for medical safety. This title brings together all the important aspects of Clinical Engineering. It provides the reader with prospects for the future of clinical engineering as well as guidelines and standards for best practice around the world.

Download or read book 3D Printing Applications in Cardiovascular Medicine written by James K Min and published by Academic Press. This book was released on 2018-07-04 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing Applications in Cardiovascular Medicine addresses the rapidly growing field of additive fabrication within the medical field, in particular, focusing on cardiovascular medicine. To date, 3D printing of hearts and vascular systems has been largely reserved to anatomic reconstruction with no additional functionalities. However, 3D printing allows for functional, physiologic and bio-engineering of products to enhance diagnosis and treatment of cardiovascular disease. This book contains the state-of-the-art technologies and studies that demonstrate the utility of 3D printing for these purposes. - Addresses the novel technology and cardiac and vascular application of 3D printing - Features case studies and tips for applying 3D technology into clinical practice - Includes an accompanying website that provides 3D examples from cardiovascular clinicians, imagers, computer science and engineering experts

Download or read book Myocardial Tissue Engineering written by Aldo R. Boccaccini and published by Springer Science & Business Media. This book was released on 2011-08-29 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Myocardial tissue engineering (MTE), a concept that intends to prolong patients’ life after cardiac damage by supporting or restoring heart function, is continuously improving. Common MTE strategies include an engineered ‘vehicle’, which may be a porous scaffold or a dense substrate or patch, made of either natural or synthetic polymeric materials. The function of the substrate is to aid transportation of cells into the diseased region of the heart and support their integration. This book, which contains chapters written by leading experts in MTE, gives a complete analysis of the area and presents the latest advances in the field. The chapters cover all relevant aspects of MTE strategies, including cell sources, specific TE techniques and biomaterials used. Many different cell types have been suggested for cell therapy in the framework of MTE, including autologous bone marrow-derived or cardiac progenitors, as well as embryonic or induced pluripotent stem cells, each having their particular advantages and disadvantages. The book covers a complete range of biomaterials, examining different aspects of their application in MTE, such as biocompatibility with cardiac cells, mechanical capability and compatibility with the mechanical properties of the native myocardium as well as degradation behaviour in vivo and in vitro. Although a great deal of research is being carried out in the field, this book also addresses many questions that still remain unanswered and highlights those areas in which further research efforts are required. The book will also give an insight into clinical trials and possible novel cell sources for cell therapy in MTE.

Download or read book Animals and Medicine written by Jack Botting and published by Open Book Publishers. This book was released on 2015-05-04 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Animals and Medicine: The Contribution of Animal Experiments to the Control of Disease offers a detailed, scholarly historical review of the critical role animal experiments have played in advancing medical knowledge. Laboratory animals have been essential to this progress, and the knowledge gained has saved countless lives—both human and animal. Unfortunately, those opposed to using animals in research have often employed doctored evidence to suggest that the practice has impeded medical progress. This volume presents the articles Jack Botting wrote for the Research Defence Society News from 1991 to 1996, papers which provided scientists with the information needed to rebut such claims. Collected, they can now reach a wider readership interested in understanding the part of animal experiments in the history of medicine—from the discovery of key vaccines to the advancement of research on a range of diseases, among them hypertension, kidney failure and cancer.This book is essential reading for anyone curious about the role of animal experimentation in the history of science from the nineteenth century to the present.

Download or read book True Valor written by Don B. Olsen and published by . This book was released on 2015-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: "On December 2, 1982, the fully mechanical Jarvik-7 heart was placed inside Barney Clark, culminating years of painstaking research and making medical history by successfully pumping Clark's blood for 112 days. True Valor takes an in-depth look at this significant event by telling the story of the doctors and researchers involved, of Barney Clark, and of the evolution of the artificial heart before and after Clark's transplant. Author Don Olsen is well positioned to tell this story, having worked on the artificial heart project under Dr. William Kolff, the man who designed the Jarvik-7. His narrative conveys the concerns and emotions of those who were part of Clark's story while offering the insights of one who knows that research does not happen overnight but takes time, resources, and the efforts of many people. Olsen's account shares the human sides of this story along with the embedded politics and technical details of medical research in clear, readable language"--Provided by publisher.