Download or read book Carburizing written by Geoffrey Parrish and published by ASM International. This book was released on 1999-01-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on his training in metallurgy and experience in a large British gear manufacturing company, Parrish reviews the microstructural features of metal products that have been carbon case-hardened, and the influence of those features on the more important material properties. He is not concerned with the carbonizing process at all. He primarily addresses students of engineering and ferrous metallurgy, but also stress and design engineers who might want to understand more fully the specifications of the materials they are considering for their designs. He wrote the eight articles to summarize the field's literature of the early 1970s for his own convenience, but at invitation, published them as a series in the Heat Treatment of Metals during 1967-77, and collected them for a first edition of the volume in 1980. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Carburizing and Carbonitriding written by and published by . This book was released on 1977 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of heat treatment of steels written by Romesh C. Sharma and published by New Age International. This book was released on 2003 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Treatment Of Steels As An Art To Improve Their Service Performance Has Been Practised Ever Since It Started To Be Used As Tools And Weapons.However, The Scientific Basis Of Heat Treatment Of Steels Became More Apparent Only In The First Half Of This Century And Still Some Gaps Remain In Its Complete Understanding.Earlier Books On Heat Treatment Of Steels Mainly Emphasised The Art And The Empirically Arrived Principles Of Heat Treatment. In The Last Few Decades, Our Understanding Of Phase Transformations And Mechanical Behaviour Of Steels, And Consequently Of Heat Treatment Of Steels, Has Considerably Increased.In This Book On Principles Of Heat Treatment Of Steels The Emphasis Is On The Scientific Principles Behind The Various Heat Treatment Processes Of Steels. Though It Is Expected That The Reader Has Sufficient Background In Phase Transformations And Mechanical Behaviour Of Materials, First Few Chapters Review These Topics With Specific Reference To Steels. Basic Principles Of Various Heat Treatment Processes Of Steels Including Surface Hardening Processes, Are Then Covered In Sufficient Detail To Give A Good Overall Understanding Of These Processes. The Detail Engineering Aspects Are, However, Omitted. These Are Easily Available In Various Handbooks On Heat Treatment. The Book Also Covers Heat Treatment Of Tool Steels And Cast Irons.The Book Has Been Well Written And Can Be Used A Textbook On Heat Treatment For Undergraduate Students. It Is Also A Good Reference Book For Teachers And Researchers In This Area And Engineers In The Industry.
Download or read book Thermochemical Surface Engineering of Steels Improving Materials Performance written by Eric J. Mittemeijer and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world s leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing. There are also chapters on low temperature techniques as well as boriding, sheradizing, aluminizing, chromizing, thermo-reactive deposition and diffusion. Reviews the fundamentals of surface treatments and current performance of improved materialsCovers nitriding, nitrocarburizing and carburizing of iron and iron carbon alloysExamines how different thermochemical surface engineering methods can help against corrosion"
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book Encyclopedia of Tribology written by Q. Jane Wang and published by Springer. This book was released on 2013-09-26 with total page 4139 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY – the study of friction, wear and lubrication – impacts almost every aspect of our daily lives. The Springer Encyclopedia of Tribology is an authoritative and comprehensive reference covering all major aspects of the science and engineering of tribology that are relevant to researchers across all engineering industries and related scientific disciplines. This is the first major reference that brings together the science, engineering and technological aspects of tribology of this breadth and scope in a single work. Developed and written by leading experts in the field, the Springer Encyclopedia of Tribology covers the fundamentals as well as advanced applications across material types, different length and time scales, and encompassing various engineering applications and technologies. Exciting new areas such as nanotribology, tribochemistry and biotribology have also been included. As a six-volume set, the Springer Encyclopedia of Tribology comprises 1630 entries written by authoritative experts in each subject area, under the guidance of an international panel of key researchers from academia, national laboratories and industry. With alphabetically-arranged entries, concept diagrams and cross-linking features, this comprehensive work provides easy access to essential information for both researchers and practicing engineers in the fields of engineering (aerospace, automotive, biomedical, chemical, electrical, and mechanical) as well as materials science, physics, and chemistry.
Download or read book Surface Hardening of Steels written by Joseph R. Davis and published by ASM International. This book was released on 2002-01-01 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A practical selection guide to help engineers and technicians choose the mot efficient surface hardening techniques that offer consistent and repeatable results. Emphasis is placed on characteristics such as processing temperature, case/coating thickness, bond strength, and hardness level obtained. The advantages and limitations of the various thermochemical, thermal and coating/surface modification technologies are compared
Download or read book Case Hardening of Steel written by Howard E. Boyer and published by . This book was released on 1987 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Treatment of Gears written by A. K. Rakhit and published by ASM International. This book was released on 2000 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Rakhit wants other engineers to avoid the considerable trouble he had understanding the art of gear heat treatment when he first embarked on a career in gear design and manufacturing. He explains how heat treating and gears made of some kinds of steel gives the gears high geometric accuracy, but can also distort them and raise the cost of manufacturing, so a gear engineer needs to excel in manufacturing, lubrication, life and failure analysis, and machine design as well as design. He presents a case history of each successful gear heat treatment process that provide information on the quality of gear that can be expected with the proper control of material and processes. Annotation copyrighted by Book News Inc., Portland, OR
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Practical Heat Treating written by Jon L. Dossett and published by ASM International. This book was released on 2006-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is heat treatment? This book describes heat treating technology in clear, concise, and nontheoretical language. It is an excellent introduction and guide for design and manufacturing engineers, technicians, students, and others who need to understand why heat treatment is specified and how different processes are used to obtain desired properties. The new Second Edition has been extensively updated and revised by Jon. L. Dossett, who has more than forty years of experience in theat treating operations and management. The update adds important information about new processes and process control techniques that have been developed or refined in recent years. Helpfull appendices have been added on decarburization of steels, boost/diffues cycles for carburizing, and process verification.
Download or read book Practical Nitriding and Ferritic Nitrocarburizing written by David Pye and published by ASM International. This book was released on 2003 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PRACTICAL HEAT TREATING written by JON L. DOSSETT and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel and Its Heat Treatment written by Karl-Erik Thelning and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.
