Download or read book Carbon Nanotubes Graphene and Related Nanostructures Volume 1407 written by Yoke Khin Yap and published by Materials Research Society. This book was released on 2012-07-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, graphene, and related nanostructures have attracted tremendous attentions for their unique structures and intriguing properties. These nanomaterials have been widely investigated, from theory, synthesis and characterization to applications in electronic devices, electron field emission displays, energy generation and storage, and biological and chemical sensors, etc. In addition, non-carbon nanostructures such as nanotubes and nanosheets of boron nitride (BN), boron-carbon nitride (BCN), have gained increasing interest. To facilitate scientific interaction among students and researchers on the latest advancement in this area, Symposium AA, "Carbon Nanotubes, Graphene and Related Nanostructures," was organized and held at the 2011 MRS Fall Meeting in Boston, Massachusetts. This was the largest symposium in the meeting and it emphasized all research aspects of carbon and non-carbon nanotubes and related nanostructures. This proceedings volume consists of peer-reviewed papers presented in the symposium, including invited and contributed presentations.
Download or read book Carbon Nanotubes Quantum Cylinders of Graphene written by and published by Elsevier. This book was released on 2008-09-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to mostly to nanotubes, unique synthetic nanoscale quantum systems whose physical properties are often singular (i.e. record-setting). Nanotubes can be formed from a myriad of atomic or molecular species, the only requirement apparently being that the host material or “wall fabric be configurable as a layered or sheet-like structure. Nanotubes with sp2-bonded atoms such as carbon, or boron together with nitrogen, are the champions of extreme mechanical strength, electrical response (either highly conducting or highly insulating), and thermal conductance. Carbon nanotubes can be easily produced by a variety of synthesis techniques, and for this reason they are the most studied nanotubes, both experimentally and theoretically. Boron nitride nanotubes are much more difficult to produce and only limited experimental characterization data exist. Indeed, for boron nitride nanotubes, theory is well ahead of experiment. For these reasons this volume deals largely with carbon nanotubes. Conceptually, the "building block" for a carbon nanotube is a single sheet of graphite, called graphene. Recently, it has become possible to experimentally isolate such single sheets (either on a substrate or suspended). This capability has in turn fueled many new theoretical and experimental studies of graphene itself. It is therefore fitting that this volume contains also a chapter devoted to graphene. - Comprehension- Overview- Highlights in the field
Download or read book Handbook Of Carbon Nano Materials Volumes 7 8 written by Karl M Kadish and published by World Scientific. This book was released on 2015-08-24 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh and eighth volumes of Handbook of Carbon Nano Materials focus on novel properties and applications of nanocarbons, viz., graphene, nanotube and fullerene. The books provide a comprehensive overview of the author's work, and significant discoveries and pioneering contributions from other groups. Specific applications cover latest developments in graphene synthesis, CVD of carbon nanomaterials, multifunctional carbon nanostructures, chemical manipulation, energy conversion and storage, nanotube micellar surface chemistry, and biosensor development. This is a highly useful book for graduate students, as well as beginning and senior researchers.
Download or read book Carbon Nanotubes written by Ado Jorio and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Carbon Nanotubes: Synthesis, Structure, Properties and Applications, this second volume focuses on those areas that have grown rapidly in the past few years. Contributing authors reflect the multidisciplinary nature of the book and are all leaders in their particular areas of research. Among the many topics they cover are graphene and other carbon-like and tube-like materials, which are likely to affect and influence developments in nanotubes within the next five years. Extensive use of illustrations enables you to better understand and visualize key concepts and processes.
Download or read book Understanding Carbon Nanotubes written by Annick Loiseau and published by Springer Science & Business Media. This book was released on 2006-07-07 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the foundations of carbon nanotube science, reviewing recent developments and prospects for practical application. Each chapter summarizes relevant concepts from physics, chemistry or materials science, followed by detailed reports on topics including polymorphism and mircostructure of carbon; synthesis and growth; structural analysis by electron microscopy; spectroscopic methods; electronic structure; transport; mechanical and surface properties of nanotubes and composites.
Download or read book Handbook Of Carbon Nano Materials Volumes 5 6 written by Karl M Kadish and published by World Scientific. This book was released on 2014-01-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth and sixth volumes of the Handbook of Carbon Nano Materials focus on fundamental properties and key applications of graphene. Graphene, the thinnest known material made of a single atom thick sheet of carbon atoms arranged hexagonally, offers great opportunities for application development in nanotechnology. This handbook covers fundamental properties, characterization, chemical manipulation, and applications of graphene. Specific applications cover latest developments in chemical manipulation, thermodynamic characterization, energy conversion and storage, and biosensor development.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Graphene and Carbon Nanotubes written by Ermin Malic and published by John Wiley & Sons. This book was released on 2013-04-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: A first on ultrafast phenomena in carbon nanostructures like graphene, the most promising candidate for revolutionizing information technology and communication The book introduces the reader into the ultrafast nanoworld of graphene and carbon nanotubes, including their microscopic tracks and unique optical finger prints. The author reviews the recent progress in this field by combining theoretical and experimental achievements. He offers a clear theoretical foundation by presenting transparently derived equations. Recent experimental breakthroughs are reviewed. By combining both theory and experiment as well as main results and detailed theoretical derivations, the book turns into an inevitable source for a wider audience from graduate students to researchers in physics, materials science, and electrical engineering who work on optoelectronic devices, renewable energies, or in the semiconductor industry.
Download or read book Proceedings of 22nd International Conference on Graphene Carbon Nanotubes and Nanostructures 2018 written by ConferenceSeries and published by ConferenceSeries. This book was released on 2018-09-11 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: September 17-18, 2018 Berlin, Germany Key Topics : Graphene Modification and Functionalization, Graphene Synthesis, Applications of Carbon in Energy, Graphene and 2D Materials based Nanocomposites, Emerging Trends in the field of Graphene Nano, Carbon nanotubes and graphene, Semiconductor Materials and Nanostructures, Graphene-like 2D materials, Graphene nano In Energy and Storage, Carbon nano chips and nanostructures,
Download or read book Handbook Of Carbon Nanomaterials Volumes 9 10 written by R Bruce Weisman and published by World Scientific. This book was released on 2019-01-22 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a tribute to the career of Prof. Mildred Dresselhaus. It focuses on the optical properties and spectroscopy of single-wall carbon nanotubes. It contains chapters on diverse experimental and theoretical aspects of the field, written by internationally recognized experts. The volume serves as an important resource for researchers and students interested in carbon nanotubes.
Download or read book Trends in Nanoscale Mechanics written by Vasyl Harik and published by Springer. This book was released on 2014-08-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of the state-of-the-art reviews written by the leading researchers in the areas of nanoscale mechanics, molecular dynamics, nanoscale modeling of nanocomposites and mechanics of carbon nanotubes. No other book provides reviews of recent discoveries such as a nanoscale analog of the Pauli’s principle, i.e., effect of the spatial exclusion of electrons or the SEE effect, a new Registry Matrix Analysis for the nanoscale interfacial sliding and new data on the effective viscosity of interfacial electrons in nanoscale stiction at the interfaces. This volume is also an exceptional resource on the well tested nanoscale modeling of carbon nanotubes and nanocomposites, new nanoscale effects, unique evaluations of the effective thickness of carbon nanotubes under different loads, new data on which size of carbon nanotubes is safer and many other topics. Extensive bibliography concerning all these topics is included along with the lucid short reviews. Numerous illustrations are provided for molecular dynamic simulations, fascinating nanoscale phenomena and remarkable new effects. It is of interest to a wide range of researchers and students.
Download or read book Graphene Carbon Nanotube Hybrids for Energy and Environmental Applications written by Wei Fan and published by Springer. This book was released on 2016-11-09 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various carbon nanomaterials and their unique properties, and offers a detailed introduction to graphene–carbon nanotube (CNT) hybrids. It demonstrates strategies for the hybridization of CNTs with graphene, which fully utilize the synergistic effect between graphene and CNTs. It also presents a wide range of applications of graphene–CNT hybrids as novel materials for energy storage and environmental remediation. Further, it discusses the preparation, structures and properties of graphene–CNT hybrids, providing interesting examples of three types of graphene–CNT hybrids with different nanostructures. This book is of interest to a wide readership in various fields of materials science and engineering.
Download or read book Handbook of Carbon Nano Materials written by Francis D'Souza and published by World Scientific. This book was released on 2011 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Functionalization of graphene / Nikolaos Karousis, Solon Economopoulos and Nikos Tagmatarchis -- 2. Advanced carbon materials for electrochemical energy conversion and storage / Junbo Hou [und weitere] -- 3. Carbon nanomaterial-based molecular architectures for light energy conversion / Taku Hasobe -- 4. Electrochemistry of carbon nanostructures: from pristine materials to functional devices / Matteo Iurlo [und weitere] -- 5. Fullerene-based self-assembled morphological materials / Yanfei Shen, Junko Aimi and Takashi Nakanishi -- 6. Hybrids involving fullerenes and carbon nanotubes / Maria Vizuete [und weitere] -- 7. Semiconductor carbon nanotube optics / Lisa J. Nogaj, Libai Huang and Todd D. Krauss -- 8. Near-field optics of SWNTs and FRET in their nanoscale complexes / Tetyana Ignatova, Andrei M. Nemilentsau and Slava V. Rotkin -- 9. Understanding the role of the metal catalyst in carbon nanotube growth: towards chiral-selective growth of single-walled carbon nanotubes / Wei-Hung Chiang and R. Mohan Sankaran -- 10. Stability computations for fullerenes and metallofullerenes / Zdenek Slanina [und weitere]
Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites and nanocomposites are used in cases where long durability and strength of components are required; i.e., where high stress levels, erosion processes and multiphase environments are present, including the parts under collision and impact, the parts under rotating motion and erosion (like excavation drills in oil and gas wells). The first volume of this book aims to provide a guide for fabrication of new nanocomposites mainly based on carbon nanotubes and graphene. The main topics of this volume are: Application of Nano-powders for Formation of Metal Matrix of Composites, Conjugated Polymer Nanocomposites, Biopolymer Nanocomposites, Dental Nanocomposites, Graphene-based Nanocomposites for Electrochemical Energy Storage, Polymer/Filler Composites for Optical Diffuse Reflectors, Synthesis and Applications of LDH-Based Nanocomposites, Rubber—CNT Nanocomposites, Nanocomposite Fibers with Carbon Nanotubes, Fabrications of Graphene Based Nanocomposites for Electrochemical Sensing of Drug Molecules, Recent Advances in Graphene Metal Oxide Based Nanocomposites.
Download or read book Carbon Nanomaterials written by Rakesh Behari Mathur and published by CRC Press. This book was released on 2016-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of nanostructures has become, in recent years, a theme common to many disciplines, in which scientists and engineers manipulate matter at the atomic and molecular level in order to obtain materials and systems with significantly improved properties. Carbon nanomaterials have a unique place in nanoscience owing to their exceptional thermal, electrical, chemical, and mechanical properties, finding application in areas as diverse as super strong composite materials, energy storage and conversion, supercapacitors, smart sensors, targeted drug delivery, paints, and nanoelectronics. This book is the first to cover a broad spectrum of carbon nanomaterials, namely carbon nanofibers, vapor-grown carbon fibers, different forms of amorphous nanocarbons besides carbon nanotubes, fullerenes, graphene, graphene nanoribbons, graphene quantum dots, etc. in a single volume.
Download or read book Handbook of Graphene Volume 3 written by Mei Zhang and published by John Wiley & Sons. This book was released on 2019-06-11 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume in a series of handbooks on graphene research and applications Graphene is a valuable nanomaterial used in technology. This handbook is focused on Graphene-Like 2D Materials. The Handbook of Graphene, Volume 3 covers topics that include planar graphene superlattices; magnetic and optical properties of graphene materials with porous defects; and nanoelectronic application of graphyne and its structural derivatives.
Download or read book A Primer on the Geometry of Carbon Nanotubes and Their Modifications written by Sadegh Imani Yengejeh and published by Springer. This book was released on 2015-01-12 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a comprehensive system for categorizing carbon nanotubes and their modifications in terms of nano sheets, nanotubes, microscopic and atomic modifications. In addition, the material and geometric properties of these nano-configurations are addressed. Lastly, it introduces a number of common software packages for geometry generation and several commercial finite element programs.
