Download or read book Carbon Nanotube and Graphene Nanoribbon Interconnects written by Debaprasad Das and published by CRC Press. This book was released on 2017-12-19 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Alternative to Copper-Based Interconnect Technology With an increase in demand for more circuit components on a single chip, there is a growing need for nanoelectronic devices and their interconnects (a physical connecting medium made of thin metal films between several electrical nodes in a semiconducting chip that transmit signals from one point to another without any distortion). Carbon Nanotube and Graphene Nanoribbon Interconnects explores two new important carbon nanomaterials, carbon nanotube (CNT) and graphene nanoribbon (GNR), and compares them with that of copper-based interconnects. These nanomaterials show almost 1,000 times more current-carrying capacity and significantly higher mean free path than copper. Due to their remarkable properties, CNT and GNR could soon replace traditional copper interconnects. Dedicated to proving their benefits, this book covers the basic theory of CNT and GNR, and provides a comprehensive analysis of the CNT- and GNR-based VLSI interconnects at nanometric dimensions. Explore the Potential Applications of CNT and Graphene for VLSI Circuits The book starts off with a brief introduction of carbon nanomaterials, discusses the latest research, and details the modeling and analysis of CNT and GNR interconnects. It also describes the electrical, thermal, and mechanical properties, and structural behavior of these materials. In addition, it chronicles the progression of these fundamental properties, explores possible engineering applications and growth technologies, and considers applications for CNT and GNR apart from their use in VLSI circuits. Comprising eight chapters this text: Covers the basics of carbon nanotube and graphene nanoribbon Discusses the growth and characterization of carbon nanotube and graphene nanoribbon Presents the modeling of CNT and GNR as future VLSI interconnects Examines the applicability of CNT and GNR in terms of several analysis works Addresses the timing and frequency response of the CNT and GNR interconnects Explores the signal integrity analysis for CNT and GNR interconnects Models and analyzes the applicability of CNT and GNR as power interconnects Considers the future scope of CNT and GNR Beneficial to VLSI designers working in this area, Carbon Nanotube and Graphene Nanoribbon Interconnects provides a complete understanding of carbon-based materials and interconnect technology, and equips the reader with sufficient knowledge about the future scope of research and development for this emerging topic.
Download or read book Nano Interconnect Materials and Models for Next Generation Integrated Circuit Design written by Sandip Bhattacharya and published by CRC Press. This book was released on 2023-12-22 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggressive scaling of device and interconnect dimensions has resulted in many low dimensional issues in the nanometer regime. This book deals with various new generation interconnect materials and interconnect modeling and highlights the significance of novel nano interconnect materials for 3D integrated circuit design. It provides information about advanced nanomaterials like carbon nanotube (CNT) and graphene nanoribbon (GNR) for the realization of interconnects, interconnect models, and crosstalk noise analysis. Features: Focusses on materials and nanomaterials utilization in next generation interconnects based on Carbon nanotubes (CNT) and Graphene nanoribbons (GNR). Helps readers realize interconnects, interconnect models, and crosstalk noise analysis. Describes Hybrid CNT and GNR based interconnects. Presents the details of power supply voltage drop analysis in CNT and GNR interconnects. Overviews pertinent RF performance and stability analysis. This book is aimed at graduate students and researchers in electrical and materials engineering, nano/microelectronics.
Download or read book Carbon Nanotube Based VLSI Interconnects written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2014-11-01 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brief primarily focuses on the performance analysis of CNT based interconnects in current research scenario. Different CNT structures are modeled on the basis of transmission line theory. Performance comparison for different CNT structures illustrates that CNTs are more promising than Cu or other materials used in global VLSI interconnects. The brief is organized into five chapters which mainly discuss: (1) an overview of current research scenario and basics of interconnects; (2) unique crystal structures and the basics of physical properties of CNTs, and the production, purification and applications of CNTs; (3) a brief technical review, the geometry and equivalent RLC parameters for different single and bundled CNT structures; (4) a comparative analysis of crosstalk and delay for different single and bundled CNT structures; and (5) various unique mixed CNT bundle structures and their equivalent electrical models.
Download or read book Nano Interconnects written by Afreen Khursheed and published by CRC Press. This book was released on 2021-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively covers on-chip interconnect dimension and application of carbon nanomaterials for modeling VLSI interconnect and buffer circuits. It provides analysis of ultra-low power high speed nano-interconnects based on different facets such as material modeling, circuit modeling and the adoption of repeater insertion strategies and measurement techniques. It covers important topics including on-chip interconnects, interconnect modeling, electrical impedance modeling of on-chip interconnects, modeling of repeater buffer and variability analysis. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. Aimed at senior undergraduate and graduate students in the field of electrical engineering, electronics and communications engineering for courses on Advanced VLSI Interconnects/Advanced VLSI Design/VLSI Interconnects/VLSI Design Automation and Techniques, this book: Provides comprehensive coverage of fundamental concepts related to nanotube transistors and interconnects. Discusses properties and performance of practical nanotube devices and related applications. Covers physical and electrical phenomena of carbon nanotubes, as well as applications enabled by this nanotechnology. Discusses the structure, properties, and characteristics of graphene-based on-chip interconnect. Examines interconnect power and interconnect delay issues arising due to downscaling of device size.
Download or read book Carbon Nanotubes for Interconnects written by Aida Todri-Sanial and published by Springer. This book was released on 2016-07-09 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference on the use of carbon nanotubes (CNTs) as interconnect material for horizontal, on-chip and 3D interconnects. The authors demonstrate the uses of bundles of CNTs, as innovative conducting material to fabricate interconnect through-silicon vias (TSVs), in order to improve the performance, reliability and integration of 3D integrated circuits (ICs). This book will be first to provide a coherent overview of exploiting carbon nanotubes for 3D interconnects covering aspects from processing, modeling, simulation, characterization and applications. Coverage also includes a thorough presentation of the application of CNTs as horizontal on-chip interconnects which can potentially revolutionize the nanoelectronics industry. This book is a must-read for anyone interested in the state-of-the-art on exploiting carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Download or read book Design and Crosstalk Analysis in Carbon Nanotube Interconnects written by P. Uma Sathyakam and published by Springer Nature. This book was released on 2020-10-31 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference on carbon nanotubes for interconnect applications. It presents the recent advances in modelling and challenges of carbon nanotube (CNT)-based VLSI interconnects. Starting with a background of carbon nanotubes and interconnects, this book details various aspects of CNT interconnect models, the design metrics of CNT interconnects, crosstalk analysis of recently proposed CNT interconnect structures, and geometries. Various topics covered include the use of semiconducting CNTs around metallic CNTs, CNT interconnects with air gaps, use of emerging ultra low-k materials and their integration with CNT interconnects, and geometry-based crosstalk reduction techniques. This book will be useful for researchers and design engineers working on carbon nanotubes for interconnects for both 2D and 3D integrated circuits.
Download or read book Carbon Nanotube and Graphene Device Physics written by H.-S. Philip Wong and published by Cambridge University Press. This book was released on 2011 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first introductory textbook to explain the properties and performance of practical nanotube devices and related applications.
Download or read book Recent Advances in Graphene Nanophotonics written by Shobhit K. Patel and published by Springer Nature. This book was released on 2023-05-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are growing advantages to the use of graphene-based nanophotonics in communication, sensing, security, safety, spectroscopy, manufacturing, biomedicine, agriculture, imaging, and other fields. These advantages, as well as the numerous challenges associated with this technology and proposed solutions to these challenges, are summarized in this book. The key objective of the book is to serve as a single-source reference for the rapidly expanding application aspects of the technology of graphene-based nanophotonics, as well as the number of modules required for their successful implementation. This book seeks to give readers a comprehensive understanding of several elements of graphene-based nanophotonics, such as emerging application areas, the design and modelling of sensors, absorbers, optical fiber, encoders, etc. A complete view of the progress and breakthroughs in novel materials for sensing, detecting and encoding technology is presented. The book also emphasizes the consequences of THz signals on human health, as well as the environmental components of THz. This book will be of tremendous value for those with an interest in electronic engineering, particularly those keeping an eye on this emerging technology.
Download or read book Nano Interconnect Materials and Models for Next Generation Integrated Circuit Design written by Sandip Bhattacharya and published by CRC Press. This book was released on 2023-12-22 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusses on materials and nanomaterials utilization in next generation interconnects based on carbon nanotubes (CNT) and graphene nanoribbons (GNR) Helps readers realize interconnects, interconnect models, and crosstalk noise analysis Describes hybrid CNT and GNR based interconnects Presents the details of power supply voltage drop analysis in CNT and GNR interconnects Overviews pertinent RF performance and stability analysis
Download or read book Introduction to Microelectronics to Nanoelectronics written by Manoj Kumar Majumder and published by CRC Press. This book was released on 2020-11-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on micro- and nanoelectronics design and technology, this book provides thorough analysis and demonstration, starting from semiconductor devices to VLSI fabrication, designing (analog and digital), on-chip interconnect modeling culminating with emerging non-silicon/ nano devices. It gives detailed description of both theoretical as well as industry standard HSPICE, Verilog, Cadence simulation based real-time modeling approach with focus on fabrication of bulk and nano-devices. Each chapter of this proposed title starts with a brief introduction of the presented topic and ends with a summary indicating the futuristic aspect including practice questions. Aimed at researchers and senior undergraduate/graduate students in electrical and electronics engineering, microelectronics, nanoelectronics and nanotechnology, this book: Provides broad and comprehensive coverage from Microelectronics to Nanoelectronics including design in analog and digital electronics. Includes HDL, and VLSI design going into the nanoelectronics arena. Discusses devices, circuit analysis, design methodology, and real-time simulation based on industry standard HSPICE tool. Explores emerging devices such as FinFETs, Tunnel FETs (TFETs) and CNTFETs including their circuit co-designing. Covers real time illustration using industry standard Verilog, Cadence and Synopsys simulations.
Download or read book Crosstalk in Modern On Chip Interconnects written by B.K. Kaushik and published by Springer. This book was released on 2016-04-06 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides accurate FDTD models for on-chip interconnects, covering most recent advancements in materials and design. Furthermore, depending on the geometry and physical configurations, different electrical equivalent models for CNT and GNR based interconnects are presented. Based on the electrical equivalent models the performance comparison among the Cu, CNT and GNR-based interconnects are also discussed in the book. The proposed models are validated with the HSPICE simulations. The book introduces the current research scenario in the modeling of on-chip interconnects. It presents the structure, properties, and characteristics of graphene based on-chip interconnects and the FDTD modeling of Cu based on-chip interconnects. The model considers the non-linear effects of CMOS driver as well as the transmission line effects of interconnect line that includes coupling capacitance and mutual inductance effects. In a more realistic manner, the proposed model includes the effect of width-dependent MFP of the MLGNR while taking into account the edge roughness.
Download or read book Graphene Carbon Nanotube Hybrids for Energy and Environmental Applications written by Wei Fan and published by Springer. This book was released on 2016-11-09 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various carbon nanomaterials and their unique properties, and offers a detailed introduction to graphene–carbon nanotube (CNT) hybrids. It demonstrates strategies for the hybridization of CNTs with graphene, which fully utilize the synergistic effect between graphene and CNTs. It also presents a wide range of applications of graphene–CNT hybrids as novel materials for energy storage and environmental remediation. Further, it discusses the preparation, structures and properties of graphene–CNT hybrids, providing interesting examples of three types of graphene–CNT hybrids with different nanostructures. This book is of interest to a wide readership in various fields of materials science and engineering.
Download or read book Through Silicon Vias written by Brajesh Kumar Kaushik and published by CRC Press. This book was released on 2016-11-30 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in semiconductor technology offer vertical interconnect access (via) that extend through silicon, popularly known as through silicon via (TSV). This book provides a comprehensive review of the theory behind TSVs while covering most recent advancements in materials, models and designs. Furthermore, depending on the geometry and physical configurations, different electrical equivalent models for Cu, carbon nanotube (CNT) and graphene nanoribbon (GNR) based TSVs are presented. Based on the electrical equivalent models the performance comparison among the Cu, CNT and GNR based TSVs are also discussed.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Nanocarbon Electronics written by Changjian Zhou and published by CRC Press. This book was released on 2020-12-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of research on applications of carbon nanotubes (CNTs) and graphene to electronic devices. As nanocarbons in general, and CNTs and graphene in particular, are becoming increasingly recognized as the most promising materials for future generations of electronic devices, including transistors, sensors, and interconnects, a knowledge gap still exists between the basic science of nanocarbons and their feasibility for cost-effective product manufacturing. The book highlights some of the issues surrounding this missing link by providing a detailed review of the nanostructure and electronic properties, materials, and device fabrication and of the structure–property–application relationships.
Download or read book Graphene Nanoelectronics written by Raghu Murali and published by Springer Science & Business Media. This book was released on 2012-03-13 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how will graphene can be used as a replacement for Silicon technology “ and the potential benefits of using graphene in a wide variety of electronic applications. Graphene has emerged as a potential candidate to replace traditional CMOS for a number of electronic applications; this book presents the latest advances in graphene nanoelectronics and details its use in alternative channel materials, on-chip interconnects, heat spreaders, RF transistors, NEMS, and sensors. The book also provides details on the various methods to grow graphene, including epitaxial, CVD, and chemical methods. With the growing interest in this material, this book serves as a spring-board for anyone trying to start working on this topic. The book is also suitable to experts who wish to update themselves with the latest findings in the field.
Download or read book Nanopackaging written by James E. Morris and published by Springer. This book was released on 2018-09-22 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of nanoscale electronics and systems packaging, and covers nanoscale structures, nanoelectronics packaging, nanowire applications in packaging, and offers a roadmap for future trends. Composite materials are studied for high-k dielectrics, resistors and inductors, electrically conductive adhesives, conductive "inks," underfill fillers, and solder enhancement. The book is intended for industrial and academic researchers, industrial electronics packaging engineers who need to keep abreast of progress in their field, and others with interests in nanotechnology. It surveys the application of nanotechnologies to electronics packaging, as represented by current research across the field.
