Download or read book Carbon Nanofiber Reinforced Polymer Composites written by Ronald L. Poveda and published by Springer. This book was released on 2015-09-15 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an extensive review of literature on the properties of carbon nanofibers (CNF) reinforced polymer composites in conjunction with advances in the production and properties of CNFs. It further provides readers a view into the development of lightweight composites whose properties are tailored and enhanced with micro- and nano-reinforcement, along with results from data comparisons from several published investigations.

Download or read book Carbon Nanotubes and Carbon Nanofibers in Concrete Advantages and Potential Risks written by Andrzej Cwirzen and published by Elsevier. This book was released on 2021-07-10 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the application of carbon nanotubes and carbon nanofibers in traditional concretes based on Portland cement. Fundamental information is given related to the production technologies of carbon nanotubes and carbon nanofibers, as well as concretes and methods of incorporation. It also contains a section focusing on the possible negative effects of carbon nanotubes and carbon nanofibers on animals and humans. The book indicates benefits and possible problems related to the application of carbon nanotubes and carbon nanofibers in concrete. It is designed to be easy to access and digest for the reader, aiming to reach an audience, not only from academia, but also from the construction industry, materials producers, and contractors who might work with nanomaterials. Outlines the major properties and synthesis methods for carbon nanomaterials in concrete engineering; Explains the role of carbon nanotubes and nanofibers in creating high-performance concrete; Assesses the major challenges of integrating carbon nanomaterials into concrete manufacture on an industrial scale.

Download or read book Carbon Nanofibers written by Chang-Seop Lee and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into two sections. Section One covers the authors' work on the synthesis and characteristics of the various carbon nanofibers and microcoils using chemical vapor deposition and electrospun technologies. This section includes Chapters One through Four. Chapter One is an introductory chapter which presents synthesis, properties and analysis of carbon nanofibers and microcoils prepared by chemical vapor deposition and electrospun technologies. Chapter Two introduces information for approaching electrospun carbon nanofibers (ECNFs) with superior mechanical strength from aligned and stretched polyacrylonitrile (PAN) copolymer nanofibers possessing high degrees of morphological and structural perfection. Chapter Three investigates the in-situ and ex-situ processes for the formation of geometrically controlled carbon microcoils and the practical application of carbon microcoils to the various nano/micro electronic or mechanical devices. Chapter Four discusses the synthesis and various characterizations of carbon nanofibers synthesized by catalytic chemical vapor deposition of halogenated hydrocarbons. Section Two deals with the recent advances in materials synthesis and characterization of carbon nanofibers and their applications such as Li secondary batteries, supercapacitors and heavy metal remediation in ground and wastewater. This section includes chapter Five through Ten. Chapter Five presents preparation and characterization of carbon nanofibers (CNFs), CNFs-Si, and CNFs-(PC)Si composites synthesized by the Chemical Vapor Deposition (CVD) method using transition metal catalysts and applications to anode materials of Li secondary batteries. Chapter Six introduces a synthesis and characterization of carbon nanofibers and Si/carbon nanofiber composites based on Ni and Mo catalysts prepared for the anode material of Li secondary batteries. Chapter Seven discusses the electrophoretic deposition of Ni and Cu catalysts on C-fiber textiles for the growth of carbon nanofibers and coating of silica by the hydrolysis of tetraethyl orthosilicate on carbon nanofibers, and finally applications to the anode materials for Li secondary batteries. Chapter Eight presents synthesis and characterization of transition metal coated carbon nanofibers on Ni foam via CVD followed by a dipping method and electrochemical performance as anode materials for Li secondary batteries. Chapter Nine introduces a design of hierarchical porous carbon materials containing various metal oxides as an electrode material for high-performance supercapacitors. Chapter Ten discusses an innovative carbon nanofibrous composite material prepared by the electrospun method and its application for efficient heavy metal pollutant remediation in contaminated groundwater as well as in wastewater treatment.

Download or read book Carbon Nanofibers written by Madhuri Sharon and published by John Wiley & Sons. This book was released on 2021-03-16 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals and applications of Carbon Nanofiber (CNF). In the first section, the initial chapter on the fundamentals of CNF is by Professor Maheshwar Sharon, the recognized “Father of Carbon Nanotechnology in India”, which powerfully provides a succinct overview of CNFs. This is followed by a chapter on biogenics that have produced unique morphologies of CNF that makes them suitable to various applications. This is followed by a chapter that mainly focuses on nanocomposites, especially those involving nanocomposites of CNF. The role of nanocatalysts and composites in promoting and enhancing the synthesis and application of CNF is then covered, followed by an important chapter on the characterization of CNF. The second section of the book encompasses the various applications of CNF, such as its use as a possible superconductor to adsorb and store hydrogen, and as a microwave absorber. The application of CNF for environmental concerns is also detailed by assessing its usefulness in dye and heavy metal removal from polluted water. The applications that are addressed include lithium-ion battery, solar cell, antenna, cosmetics, usefulness in regenerative medicine, as well as various aspects of agrotechnology.

Download or read book Carbon Composites written by Deborah D.L. Chung and published by Butterworth-Heinemann. This book was released on 2016-11-08 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provides the reader with information on a wide range of carbon fiber composites, including polymer-matrix, metal-matrix, carbon-matrix, ceramic-matrix and cement-matrix composites. In contrast to other books on composites, this work emphasizes materials rather than mechanics. This emphasis reflects the key role of materials science and engineering in the development of composite materials. The applications focus of the book covers both the developing range of structural applications for carbon fiber composites, including military and civil aircraft, automobiles and construction, and non-structural applications, including electromagnetic shielding, sensing/monitoring, vibration damping, energy storage, energy generation, and deicing. In addition to these new application areas, new material in this updated edition includes coverage of cement-matrix composites, carbon nanofibers, carbon matrix precursors, fiber surface treatment, nanocarbons, and hierarchical composites. An ideal source of information for senior undergraduate students, graduate students, and professionals working with composite materials and carbon fibers, this book can be used both as a reference book and as a textbook. Introduces the entire spectrum of carbon fiber composites, including polymer-matrix, metal-matrix, carbon-matrix, ceramic-matrix and cement-matrix composites Systematically sets out the processing, properties, and applications of each type of material Emphasizes processing as the foundation of understanding, manufacturing, and designing with composite materials

Download or read book Carbon Nanofibers written by Madhuri Sharon and published by John Wiley & Sons. This book was released on 2021-02-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals and applications of Carbon Nanofiber (CNF). In the first section, the initial chapter on the fundamentals of CNF is by Professor Maheshwar Sharon, the recognized “Father of Carbon Nanotechnology in India”, which powerfully provides a succinct overview of CNFs. This is followed by a chapter on biogenics that have produced unique morphologies of CNF that makes them suitable to various applications. This is followed by a chapter that mainly focuses on nanocomposites, especially those involving nanocomposites of CNF. The role of nanocatalysts and composites in promoting and enhancing the synthesis and application of CNF is then covered, followed by an important chapter on the characterization of CNF. The second section of the book encompasses the various applications of CNF, such as its use as a possible superconductor to adsorb and store hydrogen, and as a microwave absorber. The application of CNF for environmental concerns is also detailed by assessing its usefulness in dye and heavy metal removal from polluted water. The applications that are addressed include lithium-ion battery, solar cell, antenna, cosmetics, usefulness in regenerative medicine, as well as various aspects of agrotechnology.

Download or read book Carbon Nanofibers written by Madhuri Sharon and published by John Wiley & Sons. This book was released on 2021-02-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals and applications of Carbon Nanofiber (CNF). In the first section, the initial chapter on the fundamentals of CNF is by Professor Maheshwar Sharon, the recognized “Father of Carbon Nanotechnology in India”, which powerfully provides a succinct overview of CNFs. This is followed by a chapter on biogenics that have produced unique morphologies of CNF that makes them suitable to various applications. This is followed by a chapter that mainly focuses on nanocomposites, especially those involving nanocomposites of CNF. The role of nanocatalysts and composites in promoting and enhancing the synthesis and application of CNF is then covered, followed by an important chapter on the characterization of CNF. The second section of the book encompasses the various applications of CNF, such as its use as a possible superconductor to adsorb and store hydrogen, and as a microwave absorber. The application of CNF for environmental concerns is also detailed by assessing its usefulness in dye and heavy metal removal from polluted water. The applications that are addressed include lithium-ion battery, solar cell, antenna, cosmetics, usefulness in regenerative medicine, as well as various aspects of agrotechnology.

Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.

Download or read book Carbon Nanotubes From Basic Research to Nanotechnology written by Valentin N. Popov and published by Springer Science & Business Media. This book was released on 2006-04-03 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises reviews on various topics of carbon nanotube research from specialists in the field, together with reports on on-going research. Both are intended to give a detailed picture of the remarkable properties of these one-dimensional nanostructures. Particular attention is paid to the synthesis, characterization, properties, and application of nanotubes. The book will be an indispensable introduction for the newcomers in the field as well as a valuable update for researchers in the field, for it contains the most recent developments.

Download or read book Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. In the past decades, although carbon nanotubes have undergone massive research, considering the success of silicon, it has, nonetheless, been difficult to appreciate the potential influence of carbon nanotubes in current technology. The main objective of this book is therefore to give a wide variety of possible applications of carbon nanotubes in many industries related to electron device technology. This should allow the user to better appreciate the potential of these innovating nanometer sized materials. Readers of this book should have a good background on electron devices and semiconductor device physics as this book presents excellent results on possible device applications of carbon nanotubes. This book begins with an analysis on fabrication techniques, followed by a study on current models, and it presents a significant amount of work on different devices and applications available to current technology.

Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.

Download or read book Springer Handbook of Nanomaterials written by Robert Vajtai and published by Springer Science & Business Media. This book was released on 2013-08-20 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Nanomaterials covers the description of materials which have dimension on the "nanoscale". The description of the nanomaterials in this Handbook follows the thorough but concise explanation of the synergy of structure, properties, processing and applications of the given material. The Handbook mainly describes materials in their solid phase; exceptions might be e.g. small sized liquid aerosols or gas bubbles in liquids. The materials are organized by their dimensionality. Zero dimensional structures collect clusters, nanoparticles and quantum dots, one dimensional are nanowires and nanotubes, while two dimensional are represented by thin films and surfaces. The chapters in these larger topics are written on a specific materials and dimensionality combination, e.g. ceramic nanowires. Chapters are authored by well-established and well-known scientists of the particular field. They have measurable part of publications and an important role in establishing new knowledge of the particular field.

Download or read book Water Treatment Using Engineered Carbon Nanotubes written by Mohammad Hadi Dehghani and published by Elsevier. This book was released on 2023-09-09 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Treatment Using Engineered Carbon Nanotubes provides complete and detailed information on carbon nanotubes for wastewater treatment, covering preparation, properties, and application. The book begins by introducing the cross-disciplinary fundamentals of pollutants, water treatment, and carbon-based nanomaterials, followed by chapters focusing on the adsorption mechanisms, properties, modelling, and preparation techniques for carbon nanotube-based materials in the context of wastewater treatment. The subsequent sections of the book focus on specific applications of carbon nanotubes in removal of pollutants and as catalysts of co-catalysts for water treatment. Finally, other novel applications, key challenges, and research trends are discussed. This is a valuable resource for researchers and advanced students across nanotechnology, materials science, environmental science, chemical engineering, chemistry, biotechnology, sustainability, and engineering, as well as scientists, engineers, and R&D professionals with an interest in advanced nanomaterials for water treatment and environmental protection. Explains the synthesis, functionalization, and properties of carbon nanotubes for water treatment Offers comprehensive coverage of a range of carbon nanotube-based materials and technologies Addresses key challenges, research trends, and future opportunities in this innovative field

Download or read book Carbon Nanotubes in Drug and Gene Delivery written by Mahdi Karimi and published by Morgan & Claypool Publishers. This book was released on 2017-10-31 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent important discoveries and developments in nanotechnology have had a remarkable and ever-increasing impact on many industries, especially materials science, pharmaceuticals, and biotechnology. Nanocarriers have been investigated for a wide variety of different medical applications. Some examples of these nanocarriers include polymersomes, liposomes, micelles and carbon-based nanomaterials. Within this book, the authors describe different features of carbon nanotubes (CNTs), survey the properties of both the multi-walled and single-walled varieties, and cover their applications in drug and gene delivery. In addition, the book explains the structure and properties of CNTs prepared by different method, and discussed their isolation and purification. The future of CNTs in the field of biomedical science will depend on minimizing their adverse effects by careful study of their structure and properties.

Download or read book Carbon Nanotubes written by Ann Rose Abraham and published by CRC Press. This book was released on 2022-10-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book discusses a selection of advanced topics on carbon nanotubes—their extraordinary properties, structure, design, fabrication, development, engineering, functionalization, carbon nanotube enabled nanocomposites, characterization, and, moreover, their utility in many applications. The volume highlights the amazing potential of advanced CNT composites in automotive, aeronautics, spacecrafts, transistors replacing Si electronics, energy, purification, hydrogen storage, tissue regeneration, electrochemical supercapacitors, sensing, biomedical applications, agriculture, energy, and technical applications. The book specifically discusses the applications of carbon nanotubes for a greener environment, as well as applications for biomedical uses, in drug delivery, and in display technology. It also explores the uses of CNTs in the energy and aerospace industries, such as for solar energy conversion, as a lubricant additive for enhancing energy efficiency, and more. Other chapters explore the potential of carbon nanotubes in hydrogen storage and carbon nanotube electronics.

Download or read book Handbook of Porous Carbon Materials written by Andrews Nirmala Grace and published by Springer Nature. This book was released on 2023-03-06 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook summarizes the current advancements and growth in sustainable carbonaceous porous materials for fabrication and revival of energy devices, fuel cells, sensors technology, solar cell technology, stealth technology in addition to biomedical applications. It also covers the potential applications of carbon materials in various fields such as chemical, engineering, biomedical and environmental sciences. It also confers the prospective utilization of 2D and 3D hierarchical porous carbon in different interdisciplinary engineering applications. The book discusses major challenges faced in the development of cost-effective future energy storage strategies and provides effective solutions for improvement in the performance of carbon-based materials. Given the content, this handbook will be useful for students, researchers and professionals working in the area of material chemistry and allied fields.