Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Solutions for CO2 Conversion written by Tomas Ramirez Reina and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide that offers a review of the current technologies that tackle CO2 emissions The race to reduce CO2 emissions continues to be an urgent global challenge. "Engineering Solutions for CO2 Conversion" offers a thorough guide to the most current technologies designed to mitigate CO2 emissions ranging from CO2 capture to CO2 utilization approaches. With contributions from an international panel representing a wide range of expertise, this book contains a multidisciplinary toolkit that covers the myriad aspects of CO2 conversion strategies. Comprehensive in scope, it explores the chemical, physical, engineering and economical facets of CO2 conversion. "Engineering Solutions for CO2 Conversion" explores a broad range of topics including linking CFD and process simulations, membranes technologies for efficient CO2 capture-conversion, biogas sweetening technologies, plasma-assisted conversion of CO2, and much more. This important resource: * Addresses a pressing concern of global environmental damage, caused by the greenhouse gases emissions from fossil fuels * Contains a review of the most current developments on the various aspects of CO2 capture and utilization strategies * Incldues information on chemical, physical, engineering and economical facets of CO2 capture and utilization * Offers in-depth insight into materials design, processing characterization, and computer modeling with respect to CO2 capture and conversion Written for catalytic chemists, electrochemists, process engineers, chemical engineers, chemists in industry, photochemists, environmental chemists, theoretical chemists, environmental officers, "Engineering Solutions for CO2 Conversion" provides the most current and expert information on the many aspects and challenges of CO2 conversion.

Download or read book Surface Science written by Russel F. Howe and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface science has existed as a recognized discipline for more than 20 years. During this period, the subject has expanded in two important ways. On the one hand, the techniques available for studying surfaces, both experimental and theoretical, have grown in number and in sophistication. On the other hand, surface science has been applied to an increasing number of areas of technology, such as catalysis, semicon ductor processing, new materials development, corrosion prevention, adhesion and tribology. . There is, however, no sharp division between fundamental and applied surface science. New techniques can immediately be applied to technologically important problems. Improvements in understanding of fundamental phenomena such as epi taxial growth of one metal on another, or the bonding of hydrocarbons to metal sur faces, to name just two examples, have direct consequences for technology. Surface science has also become very much an interdisciplinary subject; physics, chemistry, materials science, chemical and electronical engineering all draw upon and contribute to surface science. The intimate relationship between principles and applications of surface science forms the theme of this proceedings volume. The contributions were all presented as invited lectures at an Australian-German Workshop on Surface Science held at Coogee Beach, Sydney, Australia, in December 1991. The contributors, all active surface scientists in their respective countries, were asked to highlight recent develop ments in their own areas of activity involving new techniques, advances in funda mental understanding or new applications in technology.

Download or read book Metal Support and Metal Additive Effects in Catalysis written by B. Imelik and published by Elsevier. This book was released on 2000-04-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Support and Metal-Additive Effects in Catalysis, Volume 11, documents the proceedings of an international symposium organized by the Institut de Recherches sur la Catalyse - CNRS – Villeurbanne and sponsored by the Centre National de la Recherche Scientifique, Ecully (Lyon), September 14-16, 1982. This volume contains 40 manuscripts that cover a wide range of topics. Among these are studies of metal-support interactions involving Pt/Al2O3, Pt/TiO2,Fe/TiO2, Pt/MgO, Rh /Al2O3, and Pt/CeO2 catalysts. There are also separate chapters dealing with ethane, n-butane, and cyclohexane hydrogenolysis; skeletal isomerization of methylpentanes; the catalytic activity and selectivity of noble metals; CO hydrogenation over supported on SiO2, Al2O3, Ti O2,and Zr O2 nickel catalysts; and the role of promoters in Pd catalysts for methanol synthesis. Subsequent chapters cover the poisoning of platinum and nickel by sulfur; C6H6 and CO chemisorption on Pt78Ni22 (111) single crystal alloy; the surface composition of industrial ammonia synthesis catalysts; and the role of alkalis and electronegative promoters on Fe and Ni catalysts.

Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by Wiley-VCH. This book was released on 2022-02-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.

Download or read book Advances in Fischer Tropsch Synthesis Catalysts and Catalysis written by B. H. Davis and published by CRC Press. This book was released on 2009-11-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rising oil costs have stimulated significant interest in the Fischer-Tropsch synthesis (FTS) as a method for producing a synthetic petroleum substitute. Drawn from the proceedings at a symposium held during the 236th meeting of the American Chemical Society in Philadelphia in August 2008, Advances in Fischer-Tropsch Synthesis, Catalysts, and Cataly

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Air Pollution Abstracts written by and published by . This book was released on 1971 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Energy from Natural and Synthetic Gas written by Yatish T. Shah and published by CRC Press. This book was released on 2017-03-16 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial development of energy from renewables and nuclear is critical to long-term industry and environmental goals. However, it will take time for them to economically compete with existing fossil fuel energy resources and their infrastructures. Gas fuels play an important role during and beyond this transition away from fossil fuel dominance to a balanced approach to fossil, nuclear, and renewable energies. Chemical Energy from Natural and Synthetic Gas illustrates this point by examining the many roles of natural and synthetic gas in the energy and fuel industry, addressing it as both a "transition" and "end game" fuel. The book describes various types of gaseous fuels and how are they are recovered, purified, and converted to liquid fuels and electricity generation and used for other static and mobile applications. It emphasizes methane, syngas, and hydrogen as fuels, although other volatile hydrocarbons are considered. It also covers storage and transportation infrastructure for natural gas and hydrogen and methods and processes for cleaning and reforming synthetic gas. The book also deals applications, such as the use of natural gas in power production in power plants, engines, turbines, and vehicle needs. Presents a unified and collective look at gas in the energy and fuel industry, addressing it as both a "transition" and "end game" fuel. Emphasizes methane, syngas, and hydrogen as fuels. Covers gas storage and transport infrastructure. Discusses thermal gasification, gas reforming, processing, purification and upgrading. Describes biogas and bio-hydrogen production. Deals with the use of natural gas in power production in power plants, engines, turbines, and vehicle needs.

Download or read book Thermochemical Processing of Biomass written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive examination of the large number of possible pathways for converting biomass into fuels and power through thermochemical processes Bringing together a widely scattered body of information into a single volume, this book provides complete coverage of the many ways that thermochemical processes are used to transform biomass into fuels, chemicals and power. Fully revised and updated, this new edition highlights the substantial progress and recent developments that have been made in this rapidly growing field since publication of the first edition and incorporates up-to-date information in each chapter. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition incorporates two new chapters covering: condensed phased reactions of thermal deconstruction of biomass and life cycle analysis of thermochemical processing systems. It offers a new introductory chapter that provides a more comprehensive overview of thermochemical technologies. The book also features fresh perspectives from new authors covering such evolving areas as solvent liquefaction and hybrid processing. Other chapters cover combustion, gasification, fast pyrolysis, upgrading of syngas and bio-oil to liquid transportation fuels, and the economics of thermochemically producing fuels and power, and more. Features contributions by a distinguished group of European and American researchers offering a broad and unified description of thermochemical processing options for biomass Combines an overview of the current status of thermochemical biomass conversion as well as engineering aspects to appeal to the broadest audience Edited by one of Biofuels Digest’s "Top 100 People" in bioenergy for six consecutive years Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition will appeal to all academic researchers, process chemists, and engineers working in the field of biomass conversion to fuels and chemicals. It is also an excellent book for graduate and advanced undergraduate students studying biomass, biofuels, renewable resources, and energy and power generation.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Supported Metal Complexes written by F.R. Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now IS years since the first patents in polymer supported metal complex catalysts were taken out. In the early days ion-exchange resins were used to support ionic metal complexes. Soon covalent links were developed, and after an initially slow start there was a period of explosive growth in the mid to late 1970s during which virtually every homogeneous metal complex catalyst ever reported was also studied bound to a support. Both polymers and inorganic oxides were studied as supports, although the great preponderance of workers studied polymeric supports, and of these polystyrene was by far the commonest used. This period served to show that by very careful design polymer-supported metal complex catalysts could have specific advantages over homogeneous metal complex catalysts. However the subject was a complicated one. Merely immobilising a successful metal complex catalyst to a functionalised support rarely yielded other than an inferior version of the catalyst. Amongst the many discouraging results of the 1970s, there were more than enough results that were sufficiently encouraging to demonstrate that, by careful design, supported metal complex catalysts could be prepared in which both the metal complex and the support combined together to produce an active catalyst which, due to the combination of support and complex, had advantages of activity, selectivity and specificity not found in homogeneous catalysts. Thus a new generation of catalysts was being developed.

Download or read book The Chemistry of the Catalyzed Hydrogenation of Carbon Monoxide written by G. Henrici-Olive and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the oil embargo, in the winter 1973174, parts of Western Europe present ed an almost war-like aspect on Saturdays and Sundays: no traffic on the high ways, no crowds at ski resorts and other weekend entertainment places, no gaso line at the pumps. Living and teaching then in that part of the world, and discussing the situa tion with our students, we came to the conclusion that it would be timely to col lect the fine chemistry already known at the time in the field of conversion of coal to gasoline and other chemicals, and by this way help to draw the attention to this important alternative to crude oil. The idea of this book was born. The energy shock of the early seventies has been healthy and of great conse quences in chemistry. Large amounts of research money have been put to work since, and our knowledge of the possibilities and limitations of coal-based chemistry has increased enormously. During several years it appeared inap propriate to write a monograph about a topic which was in the midst of such an impetuous development. Nevertheless, we collected, and critically selected, the upcoming work as it appeared in the literature, and also tried to provide some modest input ourselves. Now, ten years later, the situation seems to be settled to a certain degree.

Download or read book Synthetic Liquid Fuels from Hydrogenation of Carbon Monoxide written by William Jefferson Boone and published by . This book was released on 1958 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: