Download or read book Carbon Materials for Advanced Technologies written by T.D. Burchell and published by Elsevier. This book was released on 1999-07-22 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspiration for this book came from an American Carbon Society Workshop entitled "Carbon Materials for Advanced Technologies" which was hosted by the Oak Ridge National Laboratory in 1994. Chapter 1 contains a review of carbon materials, and emphasizes the structure and chemical bonding in the various forms of carbon, including the four allotropes diamond, graphite, carbynes, and the fullerenes. In addition, amorphous carbon and diamond films, carbon nanoparticles, and engineered carbons are discussed. The most recently discovered allotrope of carbon, i.e., the fullerenes, along with carbon nanotubes, are more fully discussed in Chapter 2, where their structure-property relations are reviewed in the context of advanced technologies for carbon based materials. The synthesis, structure, and properties of the fullerenes and nanotubes, and modification of the structure and properties through doping, are also reviewed. Potential applications of this new family of carbon materials are considered.The manufacture and applications of adsorbent carbon fibers are discussed in Chapter 3. The manufacture, structure and properties of high performance fibers are reviewed in Chapter 4, and the manufacture and properties of vapor grown fibers and their composites are reported in Chapter 5. The properties and applications of novel low density composites developed at Oak Ridge National Laboratory are reported in Chapter 6.Coal is an important source of energy and an abundant source of carbon. The production of engineering carbons and graphite from coal via a solvent extraction route is described in Chapter 7. Applications of activated carbons are discussed in Chapters 8-10, including their use in the automotive arena as evaporative loss emission traps (Chapter 8), and in vehicle natural gas storage tanks (Chapter 9). The application of activated carbons in adsorption heat pumps and refrigerators is discussed in Chapter 10. Chapter 11 reports the use of carbon materials in the fast growing consumer electronics application of lithium-ion batteries. The role of carbon materials in nuclear systems is discussed in Chapters 12 and 13, where fusion device and fission reactor applications, respectively, are reviewed. In Chapter 12 the major technological issues for the utilization of carbon as a plasma facing material are discussed in the context of current and future fusion tokamak devices.The essential design features of graphite moderated reactors, (including gas-, water- and molten salt-cooled systems) are reviewed in Chapter 13, and reactor environmental effects such as radiation damage and radiolytic corrosion are discussed. The fracture behaviour of graphite is discussed in qualitative and quantitative terms in Chapter 14. The applications of Linear Elastic Fracture Mechanics and Elastic-Plastic Fracture Mechanics to graphite are reviewed and a study of the role of small flaws in nuclear graphites is reported.
Download or read book Advanced Carbon Materials and Technology written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of carbon materials is multidisciplinary and is related to physics, chemistry, biology, applied sciences and engineering. The research on carbon materials has mostly focused on aspects of fundamental physics as they unique electrical, thermal and mechanical properties applicable for the range of applications. The electrons in graphene and other derived carbon materials behave as dirac fermions due to their interaction with the ions of the lattice. This direction has led to the discovery of new phenomena such as Klein tunneling in carbon based solid state systems and the so-called half-integer quantum Hall effect. Advanced Carbon Materials and Technology presents cutting-edge chapters on the processing, properties and technological developments of graphene, carbon nanotubes, carbon fibers, carbon particles and other carbon based structures including multifunctional graphene sheets, graphene quantum dots, bulky balls, carbon balls, and their polymer composites. This book brings together respected international scholars writing on the innovative methodologies and strategies adopted in carbon materials research area including Synthesis, characterization and functionalization of carbon nanotubes and graphene Surface modification of graphene Carbon based nanostructured materials Graphene and carbon nanotube based electrochemical (bio)sensors for environmental monitoring Carbon catalysts for hydrogen storage materials Optical carbon nanoobjects Graphene and carbon nanotube based biosensors Carbon doped cryogel films Bioimpact of carbon nanomaterials Photocatalytic nature of carbon nanotube based composites Engineering behavior of ash fills Fly ash syntactic foams microstructure
Download or read book Carbon Materials for Advanced Technologies written by and published by . This book was released on 1994 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials Science and Engineering of Carbon written by Michio Inagaki and published by Butterworth-Heinemann. This book was released on 2013-09-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials are exceptionally diverse in their preparation, structure, texture, and applications. In Advanced Materials Science and Engineering of Carbon, noted carbon scientist Michio Inagaki and his coauthors cover the most recent advances in carbon materials, including new techniques and processes, carbon materials synthesis, and up-to-date descriptions of current carbon-based materials, trends and applications. Beginning with the synthesis and preparation of nanocarbons, carbon nanotubes, and graphenes, the book then reviews recently developed carbonization techniques, such as templating, electrospinning, foaming, stress graphitization, and the formation of glass-like carbon. The last third of the book is devoted to applications, featuring coverage of carbon materials for energy storage, electrochemical capacitors, lithium-ion rechargeable batteries, and adsorptive storage of hydrogen and methane for environmental protection, photocatalysis, spilled oil recovery, and nuclear applications of isotropic high-density graphite.
Download or read book Carbon Materials and Nanotechnology written by Anke Krüger and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook to cover this exciting compound class, this introduction to the field of carbon nanotechnology discusses everything from nanowires to nanodiamonds, and from synthesis to applications. From the contents: * Carbon * Fullerenes * Carbon nanotubes * Carbon onions and related structures * Nanodiamonds * Diamond films Of interest not only for students but for all material scientists as well as organic and inorganic chemists, or anyone in need of a quick overview of the field.
Download or read book Industrial Carbon and Graphite Materials written by Hubert Jaeger and published by John Wiley & Sons. This book was released on 2021-03-05 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent overview of industrial carbon and graphite materials, especially their manufacture, use and applications in industry. Following a short introduction, the main part of this reference deals with industrial forms, their raw materials, properties and manifold applications. Featuring chapters on carbon and graphite materials in energy application, and as catalysts. It covers all important classes of carbon and graphite, from polygranular materials to fullerenes, and from activated carbon to carbon blacks and nanoforms of carbon. Indispensable for chemists and engineers working in such fields as steel, aluminum, electrochemistry, nanotechnology, catalyst, carbon fibres and lightweight composites.
Download or read book Carbon Materials for Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2009-02-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.
Download or read book Carbon Carbon Materials and Composites written by John D. Buckley and published by William Andrew. This book was released on 2012-12-02 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major areas of carbon-carbon materials and composites are described in this comprehensive volume. It presents data and technology on the materials and structures developed for the production of carbon-carbon materials and composites. The text is composed of papers by 13 noted authors in their areas of expertise relating to the processes and production of these material systems and structures. The subject matter in the book is arranged to lead the reader through materials processing, fabrication, structural analysis, and applications of typical carbon-carbon products. The information provided includes: fiber technology, matrix material, design of composite structures, manufacturing techniques, engineering mechanics, protective coatings, and structural applications using carbon-carbon materials and composites.
Download or read book Materials Science and Engineering of Carbon written by Michio Inagaki and published by Butterworth-Heinemann. This book was released on 2016-06-07 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Engineering of Carbon: Characterization discusses 12 characterization techniques, focusing on their application to carbon materials, including X-ray diffraction, X-ray small-angle scattering, transmission electron microscopy, Raman spectroscopy, scanning electron microscopy, image analysis, X-ray photoelectron spectroscopy, magnetoresistance, electrochemical performance, pore structure analysis, thermal analyses, and quantification of functional groups. Each contributor in the book has worked on carbon materials for many years, and their background and experience will provide guidance on the development and research of carbon materials and their further applications. Focuses on characterization techniques for carbon materials Authored by experts who are considered specialists in their respective techniques Presents practical results on various carbon materials, including fault results, which will help readers understand the optimum conditions for the characterization of carbon materials
Download or read book Carbon Nanotechnology written by Liming Dai and published by Elsevier. This book was released on 2006-04-18 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is no longer a merely social talking point and is beginning to affect the lives of everyone. Carbon nanotechnology as a major shaper of new nanotechnologies has evolved into a truly interdisciplinary field, which encompasses chemistry, physics, biology, medicine, materials science and engineering. This is a field in which a huge amount of literature has been generated within recent years, and the number of publications is still increasing every year. Carbon Nanotechnology aims to provide a timely coverage of the recent development in the field with updated reviews and remarks by world-renowned experts. Intended to be an exposition of cutting-edge research and development rather than a kind of conference proceeding, Carbon Nanotechnology will be very useful not only to experienced scientists and engineers, who wish to broaden their knowledge of the wide-ranging nanotechnology and/or to develop practical devices, but also to graduate and senior undergraduate students who look to make their mark in this field of the future. · A comprehensive treatment from materials chemistry and structure-property to practical applications · Offers an in-depth analysis of various carbon nanotechnologies from both fundamental and practical perspectives · An easily accessible assessment of the materials properties and device performances based on all of the major classes of carbon nanomaterials, including: carbon fiber; diamond; C60; and carbon nanotubes · A concise compilation of the practical applications of carbon nanotechnologies from polymer-carbon nanocomposites to sensors, electron emitters, and molecular electronics
Download or read book Lignin Chemistry written by Yuhe Liao and published by John Wiley & Sons. This book was released on 2024-05-31 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin Chemistry A thorough reference guide to Lignin Chemistry, from inherent structure revealing to transformation into chemicals, fuels, and materials Climate change, driven by rising greenhouse gas emissions, is the defining challenge of our time. Reducing our dependence on non-renewable resources such as fossil fuels will require alternative, more sustainable resources. Lignin, the only widely-occurring, renewable, aromatic bio-polymer in Nature, has a range of application potential in the production of chemicals, fuels, and other industrial materials. Lignin science has become one of the fastest-growing and most significant areas of sustainable chemistry in the world. Lignin Chemistry: Characterization, Isolation, and Valorization presents a systematic, multidisciplinary overview of this cutting-edge field and its current state of research. Beginning with a robust characterization of lignin, the book addresses the isolation and transformation of lignin, as well as the book inspires with a plethora of applications. The result is a critical resource for researchers and professionals in any area of academic or industry where renewable biomass, in particular lignin, has importance. Lignin Chemistry readers will find: Thermochemical and catalytic strategies for lignin conversion Detailed discussion of the valorization of lignin towards biopolymers, nanoparticles, carbon fibers and materials, and hydrogels An authorial team with immense and varied research experience Lignin Chemistry is ideal for chemical engineers, catalytic chemists, biochemists, material scientists, and analytical chemists in industry.
Download or read book New Carbon Based Materials for Electrochemical Energy Storage Systems Batteries Supercapacitors and Fuel Cells written by Igor V. Barsukov and published by Springer Science & Business Media. This book was released on 2006-07-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research work on electrochemical power sources in the former Warsaw Pact countries. It explores the role carbon plays in the cathodes and anodes of power sources and reveals the latest research into the development of metal air batteries, supercapacitors, fuel cells and lithium-ion and lithium-ion polymer batteries. For the first time, a full chapter was devoted to metal-carbon composites as electrode materials of lithium-ion batteries
Download or read book Carbon written by Giacomo Messina and published by Springer. This book was released on 2010-11-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-based materials and their applications constitute a burgeoning topic of scientific research among scientists and engineers drawn to the field from diverse areas such as applied physics, materials science, biology, mechanics, electronics and engineering. Further development of existing materials, advances in their applications, and discovery of new forms of carbon are the themes addressed by the frontier research in these fields. This book covers all the fundamental topics concerned with amorphous and crystalline C-based materials, such as diamond, diamond-like carbon, carbon alloys, and carbon nanotubes. The goal is, by coherently progressing from growth -- and characterization techniques to technological applications for each class of material -- to fashion the first comprehensive state-of-the-art review of this fast evolving field of research in carbon materials.
Download or read book Carbon Materials Science And Applications written by Chung Deborah D L and published by World Scientific. This book was released on 2019-01-18 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elemental carbon materials take numerous forms including graphite, carbon fiber, carbon nanotube, graphene, carbon black, activated carbon, fullerene and diamond. These forms differ greatly in the structure, properties, fabrication method, and applications. The applications of these carbon forms include electronic, electromagnetic, electrochemical, environmental and biomedical applications. Carbon materials are a subject of intense research, with strong relevance to both science and technology.This book provides a tutorial-style and up-to-date coverage of the carbon forms. In addition to an introductory chapter on carbon materials, the book includes chapters on graphite, graphene, carbon black, activated carbon, carbon fibers, and carbon nanofibers/nanotubes. For example, the chapter on graphite covers various materials in the graphite family, including polycrystalline graphite, pyrolytic graphite, turbostratic carbon, intercalated graphite, graphite oxide, exfoliated graphite and flexible graphite, in addition to their electronic and mechanical properties.This book is suitable for use as a textbook for undergraduate and graduate students in science and engineering, and as a reference book for professionals. It is dedicated to the memory of the author's PhD thesis advisor, Professor M S Dresselhaus (1930-2017) of Massachusetts Institute of Technology.
Download or read book Element Doped Functional Carbon Based Materials written by Sergio Morales-Torres and published by MDPI. This book was released on 2020-01-28 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials are one of the most fascinating materials because of their unique properties and potential use in several applications. They can be obtained from residues or by using advanced synthesis technologies like chemical vapor deposition. The carbon family is very broad, ranging from classical activated carbons to more advanced species such as carbon nanotubes and graphene. The surface chemistry is one of the most interesting aspects of this broad family of materials, which allows the incorporation of different types of chemical functionalities or heteroatoms on the carbon surface, such as O, N, B, S, or P, which can modify the acid–base character, hydrophobicity/hydrophilicity, or the electronic properties of these materials and, thus, determine the final application. This book represents a collection of original research articles and communications focused on the synthesis, properties, and applications of heteroatom-doped functional carbon materials.
Download or read book Carbon Alloys written by E. Yasuda and published by Elsevier. This book was released on 2003-03-05 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the Japanese have funded a comprehensive study of carbon materials which incorporate other elements including boron, nitrogen and fluorine, hence the title of the project "Carbon Alloys". Coined in 1992, the phrase "Carbon Alloys" can be applied to those materials mainly composed of carbon materials in multi-component systems. The carbon atoms of each component have a physical and/or chemical interactive relationship with other atoms or compounds. The carbon atoms of the components may have different hybrid bonding orbitals to create quite different carbon components. Eiichi Yasuda and his team consider the definition of Carbon Alloys, present the results of the Carbon Alloys projects, describe typical Carbon Alloys and their uses, discuss recent techniques for their characterization, and finally, illustrate potential applications and future developments for Carbon Alloy science. The book contains over thirty chapters on these studies from as many researchers. The most modern of techniques, particularly in the area of spectroscopy, were used as diagnostic tools, and many of these are applicable to pure carbons also. Porosity in carbons received considerable attention.
Download or read book Carbon Nanomaterials for Advanced Energy Systems written by Wen Lu and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of electronic devices, the world will need to double its energy supply by 2050. This book addresses this challenge and discusses synthesis and characterization of carbon nanomaterials for energy conversion and storage. Addresses one of the leading challenges facing society today as we steer away from dwindling supplies of fossil fuels and a rising need for electric power due to the proliferation of electronic products Promotes the use of carbon nanomaterials for energy applications Systematic coverage: synthesis, characterization, and a wide array of carbon nanomaterials are described Detailed descriptions of solar cells, electrodes, thermoelectrics, supercapacitors, and lithium-ion-based storage Discusses special architecture required for energy storage including hydrogen, methane, etc.
