Download or read book Carbon Carbon Composites written by E. Savage and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon fibre reinforced carbon composites form a very specialized group of materials. They may be considered as a development of the family of carbon fibre reinforced polymer composites which are becoming ever more prevalent in modern engineering. Since the early 1960s a large number of so-called 'advanced materials' have appeared on the scene. Carbon~arbon is arguably the most successful of all these products finding many and varied applications. In the field of Formula 1 motor racing for example, the present levels of performance simply could not be achieved without the use of carbon-carbon brakes and clutches. Despite the materials' obvious assets, they have not, and will not, reach their full potential until their inherent problems of excessive production costs and oxidation resistance have been addressed properly. In this respect the 'carbon-carbon story', of much potential but only limited success, serves as a lesson to all those involved in materials research, development and application. In writing this book I have tried to set up a logical progression of what the materials are, how they are made, what their assets and deficiencies are, what they are used for and to what extent they are commercially exploited. Each specialized chapter may be considered in isolation or as part of a sequence, whereas the final chapter provides a summary of the principal concepts as well as a basic review of the economic situation past, present and, hopefully, future.
Download or read book Carbon Carbon Materials and Composites written by John D. Buckley and published by William Andrew. This book was released on 2012-12-02 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major areas of carbon-carbon materials and composites are described in this comprehensive volume. It presents data and technology on the materials and structures developed for the production of carbon-carbon materials and composites. The text is composed of papers by 13 noted authors in their areas of expertise relating to the processes and production of these material systems and structures. The subject matter in the book is arranged to lead the reader through materials processing, fabrication, structural analysis, and applications of typical carbon-carbon products. The information provided includes: fiber technology, matrix material, design of composite structures, manufacturing techniques, engineering mechanics, protective coatings, and structural applications using carbon-carbon materials and composites.
Download or read book Carbon Reinforcements and Carbon Carbon Composites written by E. Fitzer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced composite materials have been a major research focus for the past forty years. As a reinforcement for conventional materials including glass, ceramics and polymers, carbon has proved to be the most successful. Carbon gives these materials flexibility so that they may be produced in bulk form with a wide variety of properties. Whereas carbon/carbon composites are the most effective materials in extreme temperature conditions. Application ranges from brakes to missile nose cones. Carbon Reinforcements and Carbon/Carbon Composites gives the present state on this subject in comprehensive form, as well as projections for other "High Tech" materials and their application.
Download or read book Carbon Fiber Composites written by Deborah Chung and published by Elsevier. This book was released on 2012-12-02 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Carbon Fiber Composites, the reader is introduced to a wide range of carbon fiber composites, including polymer-matrix, metal matrix, carbon-matrix, ceramic-matrix and hybrid composites. The subject is examined in a tutorial fashion, so that no prior knowledge of the field is required. In contrast to other books on composites, this book emphasizes materials rather than mechanics, as the prominence of composite materials has resulted from their increased presence in applications other than structure. - Provides up-to-date information on the entire spectrum of carbon fiber composites - Emphasizes processing as the foundation of composite materials development - Addresses the processing, properties and applications of each type of material systematically
Download or read book Carbon Fibers and Their Composites written by Peter Morgan and published by CRC Press. This book was released on 2005-05-20 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most literature pertaining to carbon fibers is of a theoretical nature. Carbon Fibers and their Composites offers a comprehensive look at the specific manufacturing of carbon fibers and graphite fibers into the growing surge of diverse applications that include flameproof materials, protective coatings, biomedical and prosthetics application
Download or read book Carbon Composites written by Deborah Chung and published by Butterworth-Heinemann. This book was released on 2016-11-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provides the reader with information on a wide range of carbon fiber composites, including polymer-matrix, metal-matrix, carbon-matrix, ceramic-matrix and cement-matrix composites. In contrast to other books on composites, this work emphasizes materials rather than mechanics. This emphasis reflects the key role of materials science and engineering in the development of composite materials. The applications focus of the book covers both the developing range of structural applications for carbon fiber composites, including military and civil aircraft, automobiles and construction, and non-structural applications, including electromagnetic shielding, sensing/monitoring, vibration damping, energy storage, energy generation, and deicing. In addition to these new application areas, new material in this updated edition includes coverage of cement-matrix composites, carbon nanofibers, carbon matrix precursors, fiber surface treatment, nanocarbons, and hierarchical composites. An ideal source of information for senior undergraduate students, graduate students, and professionals working with composite materials and carbon fibers, this book can be used both as a reference book and as a textbook.
Download or read book Carbon Fibers Filaments and Composites written by J.L. Figueiredo and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional synthetic materials, like metals, ceramics or glass, are usually isotropic substances, and their suitability for structural applications is achieved by morphological design and combination in the macroscopic scale. However, in modem engineering this is often not acceptable. As an alternative, the use of non-homogeneous, anisotropic materials, with significant stiffness and strength only in the directions these mechanical properties are really needed, can lead to enormous material (and weight) savings. This is the case of multiphase systems called composite materials. In these composites, different material parts are added and arranged geometrically, under clearly designed and controlled conditions. Usually, a structure of fibers provides strength and stiffness and a matrix helds them together, whilst providing the geometric form. Carbon fibers are among the high-performance fibers employed in these advanced structural composites, which are profoundly changing many of today's high technology industries. New research and development challenges in this area include upgrading the manufacturing process of fibers and composites, in order to improve characteristics and reduce costs, and modifying the interfacial properties between fibers and matrix, to guarantee better mechanical properties. The interdisciplinary nature of this "new frontier" is obvious, involving chemistry, materials science, chemical and mechanical engineering. Other topics, which more often are treated separately, are also important for the understanding of the processes of fiber production. Carbon filaments is one such topic, as the study of their mechanisms of nucleation and growth is clearly quite relevant to the production of vapour-grown carbon fibers.
Download or read book Carbon Fibers and Their Composite Materials written by Luke Henderson and published by MDPI. This book was released on 2019-07-16 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon fiber is an oft-referenced material that serves as a means to remove mass from large transport infrastructure. Carbon fiber composites, typically plastics reinforced with the carbon fibers, are key materials in the 21st century and have already had a significant impact on reducing CO2 emissions. Though, as with any composite material, the interface where each component meets, in this case the fiber and plastic, is critical to the overall performance. This text summarizes recent efforts to manipulate and optimize the interfacial interaction between these dissimilar materials to improve overall performance.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Natural and Synthetic Fiber Reinforced Composites written by Sanjay Mavinkere Rangappa and published by John Wiley & Sons. This book was released on 2022-04-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and Synthetic Fiber Reinforced Composites Discover a comprehensive exploration of fiber reinforced polymers by an expert team of editors Fiber reinforced polymer (FRP) composites offer several unique properties that make them ideal for use in a wide range of industries, from automotive and aerospace to marine, construction, and co-industrial. In Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications, a distinguished team of mechanical engineers delivers a comprehensive overview of fiber reinforced composites. This edited volume includes thorough discussions of glass-, cotton-, and carbon-fiber reinforced materials, as well as the tribological properties and non-structural applications of synthetic fiber composites. Readers will also find practical explorations of the structural evolution, mechanical features, and future possibilities of fiber, textile, and nano-cementitious materials. The physical and chemical properties of cotton fiber-based composites are explored at length, as are the extraordinary mechanical, thermal, electrical, electronic, and field emission properties of carbon nanotubes. This singular book also includes: A thorough discussion of recent advancements in natural fiber reinforced polymer composites, their implications, and the opportunities that arise as a result A comprehensive exploration of the thermal behavior of natural fiber-based composites An insightful review of the literature on sisal fiber with polymer matrices A response to the growing research gap in the existing literature regarding natural fiber-based polymer composites and solutions to address it Perfect for scientists, engineers, professors, and students working in areas involving natural and synthetic reinforced polymers and composites, Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications offers a one-of-a-kind resource to help readers understand a critical and rapidly evolving technology.
Download or read book Essentials of Carbon carbon Composites written by Colin R. Thomas and published by . This book was released on 1993 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at graduate and post-graduate level, this book aims to give a balanced and up-to-date picture of UK interests in carbon-carbon composite materials.
Download or read book Carbon Fibers written by Soo-Jin Park and published by Springer. This book was released on 2014-10-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters that discuss the manufacturing methods, surface treatment, composite interfaces, microstructure-property relationships with underlying fundamental physical and mechanical principles, and applications of carbon fibers and their composites. Recently, carbon-based materials have received much attention for their many potential applications. The carbon fibers are very strong, stiff, and lightweight, enabling the carbon materials to deliver improved performance in several applications such as aerospace, sports, automotive, wind energy, oil and gas, infrastructure, defense, and semiconductors. However, the use of carbon fibers in cost-sensitive, high-volume industrial applications is limited because of their relatively high costs. However, its production is expected to increase because of its widespread use in high-volume industrial applications; therefore, the methods used for manufacturing carbon fibers and carbon-fiber-reinforced composites and their structures and characteristics need to be investigated.
Download or read book Industrial Carbon and Graphite Materials written by Hubert Jaeger and published by John Wiley & Sons. This book was released on 2021-03-05 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent overview of industrial carbon and graphite materials, especially their manufacture, use and applications in industry. Following a short introduction, the main part of this reference deals with industrial forms, their raw materials, properties and manifold applications. Featuring chapters on carbon and graphite materials in energy application, and as catalysts. It covers all important classes of carbon and graphite, from polygranular materials to fullerenes, and from activated carbon to carbon blacks and nanoforms of carbon. Indispensable for chemists and engineers working in such fields as steel, aluminum, electrochemistry, nanotechnology, catalyst, carbon fibres and lightweight composites.
Download or read book Carbon Nanofiber Reinforced Polymer Composites written by Ronald L. Poveda and published by Springer. This book was released on 2015-09-15 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an extensive review of literature on the properties of carbon nanofibers (CNF) reinforced polymer composites in conjunction with advances in the production and properties of CNFs. It further provides readers a view into the development of lightweight composites whose properties are tailored and enhanced with micro- and nano-reinforcement, along with results from data comparisons from several published investigations.
Download or read book Carbon Carbon Composites written by Gary Savage and published by Springer Science & Business Media. This book was released on 1993 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon is a material around which a whole branch of science has developed. This book introduces carbon-carbon materials with respect to their relationship to other carbon materials. Each of the major production methods is covered and a chapter is devoted to the susceptibility to oxidation.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Applied Coal Petrology written by Isabel Suárez-Ruiz and published by Academic Press. This book was released on 2008 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of basic coal properties is important for achieving reductions in trace element emissions and improving the efficiency of combustion and combined-cycle gasification. The production of methane from coal beds is related to the properties of the in situ coal. Similarly, coal bed sequestration of carbon dioxide produced from combustion is dependent on the reservoir properties. Environmental problems accompany coal on its way from the mine to the point of utilization and beyond. Health aspects related with coal mining and coal utilization are also included because, in planning for coal use, it is impossible to separate environmental and health issues from the discussion of coal utilization. The book is aimed at a wide audience, ranging from researchers, lecturers and students to professionals in industry and discusses issues (such as the environmental, and health) that are of concern to the general public as a whole.-
