Download or read book Carbon Capture Storage and Utilization written by Malti Goel and published by CRC Press. This book was released on 2019-02-21 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon capture and storage (CCS) is among the advanced energy technologies suggested to make the conventional fossil fuel sources environmentally sustainable. It is of particular importance to coal-based economies. This book deals at length with the various aspects of carbon dioxide capture, its utilization and takes a closer look at the earth processes in carbon dioxide storage. It discusses potential of Carbon Capture, Storage, and Utilization as innovative energy technology towards a sustainable energy future. Various techniques of carbon dioxide recovery from power plants by physical, chemical, and biological means as well as challenges and prospects in biomimetic carbon sequestration are described. Carbon fixation potential in coal mines and in saline aquifers is also discussed. Please note: This volume is Co-published with The Energy and Resources Institute Press, New Delhi. Taylor & Francis does not sell or distribute the Hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka
Download or read book Carbon Capture Storage and Use written by Wilhelm Kuckshinrichs and published by . This book was released on 2014-12-31 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Capture Utilization and Storage Technologies written by Ali Ahmadian and published by Springer Nature. This book was released on with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments and Innovation in Carbon Dioxide CO2 Capture and Storage Technology written by M. Mercedes Maroto-Valer and published by Elsevier. This book was released on 2010-07-13 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction. Foreword written by Lord Oxburgh, Climate Science Peer Comprehensively examines the different methods of storage of carbon dioxide (CO2) and the various concepts for utilisation Reviews geological sequestration of CO2, including coverage of reservoir sealing and monitoring and modelling techniques used to verify geological sequestration of CO2
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture
Download or read book Carbon Capture Utilization and Storage Technologies written by BCC Research and published by . This book was released on 2015-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Capture and Storage written by Stephen A. Rackley and published by Butterworth-Heinemann. This book was released on 2017-09-05 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture and Storage, Second Edition, provides a thorough, non-specialist introduction to technologies aimed at reducing greenhouse gas emissions from burning fossil fuels during power generation and other energy-intensive industrial processes, such as steelmaking. Extensively revised and updated, this second edition provides detailed coverage of key carbon dioxide capture methods along with an examination of the most promising techniques for carbon storage. The book opens with an introductory section that provides background regarding the need to reduce greenhouse gas emissions, an overview of carbon capture and storage (CCS) technologies, and a primer in the fundamentals of power generation. The next chapters focus on key carbon capture technologies, including absorption, adsorption, and membrane-based systems, addressing their applications in both the power and non-power sectors. New for the second edition, a dedicated section on geological storage of carbon dioxide follows, with chapters addressing the relevant features, events, and processes (FEP) associated with this scenario. Non-geological storage methods such as ocean storage and storage in terrestrial ecosystems are the subject of the final group of chapters. A chapter on carbon dioxide transportation is also included. This extensively revised and expanded second edition will be a valuable resource for power plant engineers, chemical engineers, geological engineers, environmental engineers, and industrial engineers seeking a concise, yet authoritative one-volume overview of this field. Researchers, consultants, and policy makers entering this discipline also will benefit from this reference. Provides all-inclusive and authoritative coverage of the major technologies under consideration for carbon capture and storage Presents information in an approachable format, for those with a scientific or engineering background, as well as non-specialists Includes a new Part III dedicated to geological storage of carbon dioxide, covering this topic in much more depth (9 chapters compared to 1 in the first edition) Features revisions and updates to all chapters Includes new sections or expanded content on: chemical looping/calcium looping; life-cycle GHG assessment of CCS technologies; non-power industries (e.g. including pulp/paper alongside ones already covered); carbon negative technologies (e.g. BECCS); gas-fired power plants; biomass and waste co-firing; and hydrate-based capture
Download or read book Carbon Capture and Storage written by José Carlos Magalhães Pires and published by MDPI. This book was released on 2019-08-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is one of the main threats to modern society. This phenomenon is associated with an increase in greenhouse gas (GHGs, mainly carbon dioxide—CO2) emissions due to anthropogenic activities. The main causes are the burning of fossil fuels and land use change (deforestation). Climate change impacts are associated with risks to basic needs (health, food security, and clean water), as well as risks to development (jobs, economic growth, and the cost of living). The processes involving CO2 capture and storage are gaining attention in the scientific community as an alternative for decreasing CO2 emissions, reducing its concentration in ambient air. The carbon capture and storage (CCS) methodologies comprise three steps: CO2 capture, CO2 transportation, and CO2 storage. Despite the high research activity within this topic, several technological, economic, and environmental issues as well as safety problems remain to be solved, such as the following needs: increase of CO2 capture efficiency, reduction of process costs, and verification of the environmental sustainability of CO2 storage.
Download or read book Cutting Edge Technology for Carbon Capture Utilization and Storage written by Karine Ballerat-Busserolles and published by John Wiley & Sons. This book was released on 2018-04-20 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the 36 billon tons of carbon dioxide (CO2) being emitted into Earth’s atmosphere every year, only 40 million tons are able to be captured and stored. This is just a fraction of what needs to be captured, if this technology is going to make any headway in the global march toward reversing, or at least reducing, climate change. CO2 capture and storage has long been touted as one of the leading technologies for reducing global carbon emissions, and, even though it is being used effectively now, it is still an emerging technology that is constantly changing. This volume, a collection of papers presented during the Cutting-Edge Technology for Carbon Capture, Utilization, and Storage (CETCCUS), held in Clermont-Ferrand, France in the fall of 2017, is dedicated to these technologies that surround CO2 capture. Written by some of the most well-known engineers and scientists in the world on this topic, the editors, also globally known, have chosen the most important and cutting-edge papers that address these issues to present in this groundbreaking new volume, which follows their industry-leading series, Advances in Natural Gas Engineering, a seven-volume series also available from Wiley-Scrivener. With the ratification of the Paris Agreement, many countries are now committing to making real progress toward reducing carbon emissions, and this technology is, as has been discussed for years, one of the most important technologies for doing that. This volume is a must-have for any engineer or scientist working in this field.
Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.
Download or read book CO2 Capture Utilization and Sequestration Strategies written by Yatish T. Shah and published by CRC Press. This book was released on 2021-11-11 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering practical treatment strategies for CO2 emission generated from various energy-related sources, CO2 Capture, Utilization, and Sequestration Strategies emphasizes carbon capture, utilization, and sequestration (CCUS) with special focus on methods for each component of the strategy. While other books mostly focus on CCS strategy for CO2, this book details the technologies available for utilization of CO2, showing how it can be a valuable renewable source for chemicals, materials, fuels, and power instead of a waste material damaging the environment. Highlights current and potential future commercially viable CCUS strategies Discusses applications for direct and the more complex indirect utilization of CO2 streams Examines viability of the mineral carbonation process and biological treatments to convert CO2 into useful biochemicals, biomaterials, and biofuels Explores heterogeneous catalysis for thermal and electrochemical conversion and solar energy-based thermal, photo-thermal, and photocatalytic conversion of CO2 Presents the rapidly growing concept of plasma-activated catalysis for CO2 conversion CO2 Capture, Utilization, and Sequestration Strategies is a valuable reference for researchers in academia, industry, and government organizations seeking a guide to effective CCUS processes, technologies, and applications.
Download or read book Carbon Capture and Storage written by Rao Y. Surampalli and published by . This book was released on 2014-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.
Download or read book Carbon Capture and Storage written by Mai Bui and published by Royal Society of Chemistry. This book was released on 2019-11-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide the latest global perspective on the role and value of carbon capture and storage (CCS) in delivering temperature targets and reducing the impact of global warming. As well as providing a comprehensive, up-to-date overview of the major sources of carbon dioxide emission and negative emissions technologies, the book also discusses technical, economic and political issues associated with CCS along with strategies to enable commercialisation.
Download or read book Advances in Carbon Capture Utilization and Storage Technologies CCUS written by and published by . This book was released on 2024-05-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Carbon Capture and Storage written by Yongseung Yun and published by BoD – Books on Demand. This book was released on 2017-03-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon capture and storage (CCS) has been considered as a practical way in sequestering the huge anthropogenic CO2 amount with a reasonable cost until a more pragmatic solution appears. The CCS can work as a bridge before fulfilling the no-CO2 era of the future by applying to large-scale CO2 emitting facilities. But CCS appears to lose some passion by the lack of progress in technical developments and in commercial success stories other than EOR. This is the time to go back to basics, starting from finding a solution in small steps. The CCS technology desperately needs far newer ideas and breakthroughs that can overcome earlier attempts through improving, modifying, and switching the known principles. This book tries to give some insight into developing an urgently needed technical breakthrough through the recent advances in CCS research, in addition to the available small steps like soil carbon sequestration. This book provides the fundamental and practical information for researchers and graduate students who want to review the current technical status and to bring in new ideas to the conventional CCS technologies.
Download or read book Carbon Capture and Storage in International Energy Policy and Law written by Hirdan Katarina de Medeiros Costa and published by Elsevier. This book was released on 2021-10-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture and Storage in International Energy Policy and Law identifies the main contemporary regulatory requirements, challenges and opportunities involving CCS from a comparative and interdisciplinary perspective. It draws on the scholarship of renowned researchers across the fields of international energy law and policy to address CCS regulation and its impact on climate change, sustainable development, and related consequences for energy transition. In this vein, the book aims to address issues related to energy, energy justice and climate changes (including CCS technology). Contributors discuss the main challenges and advantages concerning international energy and the forms CCS may contribute to energy security, climate change, adaptation and mitigation of GHG emissions and sustainable development. In this light, the book discusses CCS as a bridge that integrates international energy, climate change and sustainable development. Covers contemporary regulatory command-and-control and market incentive instruments across the local, regional and/or international spheres in-depth and in comparison Reviews deregulatory impacts, modern financing of CCS, liability of the involved parties, and pertinent environmental issues Addresses sociotechnical aspects of CCS and its specific impact on the international arena Discusses the interplay of carbon capture and storage, renewables and the overall energy transition, current pathways to sustainable development
