Download or read book Carbon Capture Technologies for Gas Turbine Based Power Plants written by Hamidreza Gohari Darabkhani and published by Elsevier. This book was released on 2022-09-24 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Capture Technologies for Gas-Turbine-Based Power Plants explores current progress in one of the most capable technologies for carbon capture in gas-turbine-based power plants. It identifies the primary benefits and shortcomings of oxy-fuel combustion CO2 capture technology compared to other capture technologies such as pre-combustion and post-combustion capture. This book examines over 20 different oxy-combustion turbine (oxyturbine) power cycles by providing their main operational parameters, thermodynamics and process modelling, energy and exergy analysis and performance evaluation. The conventional natural gas combined cycle (NGCC) power plant with post-combustion capture used as the base-case scenario. The design procedure and operational characteristics of a radial NOx-less oxy-fuel gas turbine combustor are presented with CFD simulation and performance analysis of the heat exchanger network and turbomachinery. Overview of oxygen production and air separation units (ASU) and CO2 compression and purification units (CPU) are also presented and discussed. The most advanced stages of development for the leading oxyturbine power cycles are assessed using techno-economic analysis, sensitivity, risk assessments and levelized cost of energy (LCOE) and analysing technology readiness level (TRL) and development stages. The book concludes with a road map for the development of future gas turbine-based power plants with full carbon capture capabilities using the experiences of the recently demonstrated cycles. Analyzes more than 20 models of oxyturbine power cycles, identifying the main parameters regarding their operation, process and performance simulations and energy and exergy analysis Provides techno-economic analysis, TRL, sensitivity and risk analysis, LCOE and stages of development for oxy-combustion turbine power plants Presents the design procedure and CFD simulation of a radial NOx-less oxy-fuel gas turbine combustor exploring its influence on heat exchanger network and turbomachinery Supports practitioners, policymakers and energy industry managers seeking pathways to convert coal-fired power plants to gas-fired plants with zero CO2 emission

Download or read book Gas and Steam Turbine Power Plants written by S. Can Gülen and published by Cambridge University Press. This book was released on 2023-10-19 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore sustainable power generation technology, from first principles to modern systems. This in-depth resource builds from basic concepts and equipment to precise analysis of plant operation, through data and methods gained from hands-on design, testing, and operation. An ideal companion for engineers in the gas turbine and electric power field.

Download or read book Gas Turbine Power Generation written by Paul Breeze and published by Academic Press. This book was released on 2016-02-24 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Turbine Power Generation is a concise, up-to-date, and readable guide providing an introduction to gas turbine power generation technology. It includes detailed descriptions of gas fired generation systems, demystifies the functions of gas fired technology, and explores the economic and environmental risk factors Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide that will help them establish a reliable power supply as they also account for both social and economic objectives. Provides a concise, up-to-date, and readable guide on gas turbine power generation technology Focuses on the evolution of gas-fired power generation using gas turbines Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations

Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants. After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems. With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems

Download or read book Carbon Dioxide Emission Management in Power Generation written by Prof. Lars O. Nord and published by John Wiley & Sons. This book was released on 2020-02-12 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an engaging and clearly structured source of information on the capture and storage of CO2 Designed to bridge the gap between the many disciplines involved in carbon dioxide emission management, this book provides a comprehensive yet easy-to-understand introduction to the subject of CO2 capture. Fit for graduate students, practicing process engineers, and others interested in the subject, it offers a clear understanding and overview of thermal power plants in particular and of carbon dioxide capture and storage (CCS) in general. Carbon Dioxide Emission Management in Power Generation starts with a discussion of the greenhouse effect, climate change, and CO2 emissions as the rationale for the concept of CCS. It then looks at the long-term storage of CO2. A chapter covering different fossil fuels, their usage, and properties comes next, followed by sections on: CO2 generation, usage and properties; power plant technologies; theory of gas separation; power plant efficiency calculations; and classification of CO2 capture methods. Other chapters examine: CO2 capture by gas absorption and other gas separation methods; removing carbon from the fuel; pre- and post-combustion CO2 capture in power cycles; and oxy-combustion CO2 capture in power cycles. -Discusses both CO2 capture technologies as well as power generation technologies -Bridges the gap between many different disciplines?from scientists, geologists and engineers, to economists -One of the few books that covers all the different sciences involved in the capture and storage of CO2 -Introduces the topic and provides useful information to the academic as well as professional reader Carbon Dioxide Emission Management in Power Generation is an excellent book for students who are interested in CO2 capture and storage, as well as for chemists in industry, environmental chemists, chemical engineers, geochemists, and geologists.

Download or read book Coal Gasification Technologies and the Need for Large Scale Projects written by United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee on Science, Technology, and Innovation and published by . This book was released on 2012 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coal Power Systems written by United States. Office of Fossil Energy and published by . This book was released on 2001 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biomass Energy with Carbon Capture and Storage BECCS written by Clair Gough and published by John Wiley & Sons. This book was released on 2018-09-24 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for understanding the potential role for biomass energy with carbon capture and storage in addressing climate change Biomass Energy with Carbon Capture and Storage (BECCS) offers a comprehensive review of the characteristics of BECCS technologies in relation to its various applications. The authors — a team of expert professionals — bring together in one volume the technical, scientific, social, economic and governance issues relating to the potential deployment of BECCS as a key approach to climate change mitigation. The text contains information on the current and future opportunities and constraints for biomass energy, explores the technologies involved in BECCS systems and the performance characteristics of a variety of technical systems. In addition, the text includes an examination of the role of BECCS in climate change mitigation, carbon accounting across the supply chain and policy frameworks. The authors also offer a review of the social and ethical aspects as well as the costs and economics of BECCS. This important text: Reveals the role BECCS could play in the transition to a low-carbon economy Discusses the wide variety of technical and non-technical constraints of BECCS Presents the basics of biomass energy systems Reviews the technical and engineering issues pertinent to BECCS Explores the societal implications of BECCS systems Written for academics and research professionals, Biomass Energy with Carbon Capture and Storage (BECCS) brings together in one volume the issues surrounding BECCS in an accessible and authoritative manner.

Download or read book Clean and Efficient Coal fired Power Plants written by Heinz Termuehlen and published by American Society of Mechanical Engineers. This book was released on 2003 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the evolution toward advanced coal-fired power plants. Advanced power plants with an efficiency level of 45% are today commercially available and even more efficient plants are in their development phase. Considering that presently many pulverized coal-fired power plants operate with an efficiency of about 32%, an improvement of more than 40% specific coal consumption and CO2 discharge can be achieved. Before trying to apply as a secondary measure the use of carbon sequestration, it seems that this 40% specific CO2 discharge reduction as a primary measure can much easier be achieved. The effect of power generation on the environment can be drastically improved by the use of flue gas cleanup systems in advanced pulverized coal-fired power plants (SO2 emission reduction from 40 to 1.4 lb/MWh and NOx emission reduction from 7.5 to 0.64 lb/MWh). With an increased number of coal-fired plants, CO2 discharge and emissions can be reduced, even with an increase of electric power generation in the US by 38% over the next 20 years. Even though the book concentrates on pulverized coal-fired power plants, it also discusses and compares other options like fluidized-bed combustion and coal gasification.

Download or read book Power Plants written by Stan Kaplan and published by DIANE Publishing. This book was released on 2011 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a print on demand edition of a hard to find publication. Analyzes the factors that determine the cost of electricity from new power plants. These factors -- including construction costs, fuel expense, environ. regulations, and financing costs -- can all be affected by government, energy, environmental, and economic policies. Contents: (1) Intro. and Org.; (2) Types of Generating Technologies: Electricity Demand and Power Plant Choice and Operation; Utility Scale Generating Technologies; (3) Factors that Drive Power Plant Costs; (4) Fuel Costs. Appendixes: Power Generation Technology Process Diagrams and Images; Estimates of Power Plant Overnight Costs; Estimates of Technology Costs and Efficiency with Carbon Capture; Financial and Operating Assumptions. Charts and tables.

Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world

Download or read book Fundamentals and Applications of Supercritical Carbon Dioxide SCO2 Based Power Cycles written by Klaus Brun and published by Woodhead Publishing. This book was released on 2017-01-09 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Supercritical Carbon Dioxide (SCO2) Based Power Cycles aims to provide engineers and researchers with an authoritative overview of research and technology in this area. Part One introduces the technology and reviews the properties of SCO2 relevant to power cycles. Other sections of the book address components for SCO2 power cycles, such as turbomachinery expanders, compressors, recuperators, and design challenges, such as the need for high-temperature materials. Chapters on key applications, including waste heat, nuclear power, fossil energy, geothermal and concentrated solar power are also included. The final section addresses major international research programs. Readers will learn about the attractive features of SC02 power cycles, which include a lower capital cost potential than the traditional cycle, and the compounding performance benefits from a more efficient thermodynamic cycle on balance of plant requirements, fuel use, and emissions. Represents the first book to focus exclusively on SC02 power cycles Contains detailed coverage of cycle fundamentals, key components, and design challenges Addresses the wide range of applications of SC02 power cycles, from more efficient electricity generation, to ship propulsion

Download or read book Combined cycle Gas Steam Turbine Power Plants written by Rolf Kehlhofer and published by PennWell Books. This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a reference on technical and economic factors of combined-cycle applications within the utility and cogeneration markets. Kehlhofer - and hos co-authors give the reader tips on system layout, details on controls and automation, and operating instructions.

Download or read book 100 Years of Power Plant Development written by Heinz Termuehlen and published by American Society of Mechanical Engineers. This book was released on 2001 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews the thermodynamic design concepts behind the most common types of power generation plants. Termuehlen, who is retired from Siemens, shows how advances in power plant technologies--especially the large steam and gas turbine design--have improved the performance of power stations, and how problems have been overcome. Nuclear power, co-generation, combined-cycle, and coal gasification plants are described. The final chapter identifies available fuel sources, and examines the best technologies for converting fuel into electric power with the lowest adverse effect on the environment. c. Book News Inc.

Download or read book Carbon Dioxide Removal from Coal Fired Power Plants written by C. Hendriks and published by Springer. This book was released on 2012-11-22 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. 1. Greenhouse gas emissions and climate change . . . . . . . . . . . . . . 3 1. 1. 1. Emissions and concentrations of greenhouse gases 3 1. 1. 2. Impact of increasing greenhouse gases concentration 4 1. 2. Options to reduce carbon dioxide emissions 5 1. 2. 1. Carbon dioxide removal 8 1. 3. Scope of the thesis 10 1. 4. Outline of the thesis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1. 4. 1. General evaluation method. . . . . . . . . . . . . . . . . . . . . . . 12 1. 4. 2. Some notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 II. Simulation and optimization of carbon dioxide recovery from the flue gases of a coal-fired power plant using amines 14 Abstract 19 2. 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2. 2. The chemical absorption process. . . . . . . . . . . . . . . . . . . . . . . . 22 2. 2. 1. General process description. . . . . . . . . . . . . . . . . . . . . . . 22 2. 2. 2. Types of absorbent 23 2. 2. 3. Effects of flue gas contaminants 24 2. 3. Simulation of the scrubber in ASPEN PLUS . . . . . . . . . . . . . . . . . 25 2. 3. 1. ASPEN PLUS for flow sheet simulation 26 2. 3. 2. Simulation of the performance for the base-case design . . 26 the scrubber . . . . . . . . . . . . . . . . . . . . . . 29 2. 3. 3. Optimization of 2. 3. 4. Design and results 32 2. 3. 5. Discussion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2. 4. Integration of the scrubber in the power plant 35 2. 4. 1. Power loss caused by steam extraction 36 2. 4. 2. Power saved by avoiding preheating boiler feed water . . . 38 2. 4. 3. Power consumption by the carbon dioxide scrubber . . . . . 38 2. 4. 4. Power consumption for carbon dioxide compression . . . . . 38 2. 4. 5. Calculation of plant efficiency losses " . . . . . . . . . . . . . . 39 2. 5.

Download or read book Advances in Low Carbon Technologies and Transition written by Shigemi Kagawa and published by MDPI. This book was released on 2021-01-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of technologies and products have already become widespread in our society. However, policies have not been well-implemented to effectively reduce energy consumptions and CO2 emissions by promoting low-carbon technologies and products. This Special Issue focuses on studies targeting specific products (e.g., motor vehicle, household dishwashers, etc.) and/or technologies (e.g., information and communication technology, transport technology, CO2 capture technology, etc.) and quantifying resource and energy consumptions and CO2 emissions associated with products and technology systems using the reliable inventory database. Thus, this Special Issue provides important studies on how demand- and supply-side policies can contribute to reducing energy consumptions and CO2 emissions from consumption- and production-based perspectives.

Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.