Download or read book A Z of Capacity Management written by Dominic Ogbonna and published by Booklocker.com. This book was released on 2017-11-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most often we are told the "what and why" of capacity management, but not how to make it happen. This book provides good practical approach on how to implement the process, with a view to bringing its benefits to the organization. Capacity management is incomplete without business driven capacity planning.
Download or read book Dynamic Capacity Management for Healthcare written by Pierce Story and published by CRC Press. This book was released on 2010-12-08 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: While hospitals can learn from other industries, they cannot be improved or run like factories. With work that is more individualized than standardized, and limited control over volume and arrivals, even the leanest-minded hospital must recognize that healthcare systems are more dynamic than nearly any work environment.Written with the creativity n
Download or read book Cloud Capacity Management written by Navin Sabharwal and published by Apress. This book was released on 2013-08-26 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cloud Capacity Management helps readers in understanding what the cloud, IaaS, PaaS, SaaS are, how they relate to capacity planning and management and which stakeholders are involved in delivering value in the cloud value chain. It explains the role of capacity management for a creator, aggregator, and consumer of cloud services and how to provision for it in a 'pay as you use model'. This involves a high level of abstraction and virtualization to facilitate rapid and on demand provisioning of services. The conventional IT service models take a traditional approach when planning for service capacity to provide optimum services levels which has huge cost implications for service providers. This book addresses the gap areas between traditional capacity management practices and cloud service models. It also showcases capacity management process design and implementation in a cloud computing domain using ITSM best practices. This book is a blend of ITSM best practices and infrastructure capacity planning and optimization implementation in various cloud scenarios. Cloud Capacity Management addresses the basics of cloud computing, its various models, and their impact on capacity planning. This book also highlights the infrastructure capacity management implementation process in a cloud environment showcasing inherent capabilities of tool sets available and the various techniques for capacity planning and performance management. Techniques like dynamic resource scheduling, scaling, load balancing, and clustering etc are explained for implementing capacity management.
Download or read book Capacity Management Review written by and published by . This book was released on 1994 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ITIL Capacity Management paperback written by Larry Klosterboer and published by Pearson Education. This book was released on 2011-02-17 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Business-Focused, Best-Practice Guide to Succeeding with ITIL Capacity Management Using ITIL® capacity management processes, IT organizations can eliminate waste and overbuying, reduce both equipment and staffing costs, drive more value from existing investments, and consistently provide the right resources to meet the needs of the business. Now, in this comprehensive, best-practice guide, leading ITIL expert Larry Klosterboer systematically explains how to manage capacity using the ITIL framework and techniques. Drawing on his extensive ITIL experience, Klosterboer covers all facets of ITIL-based capacity management, and offers proven solutions to the challenges IT organizations encounter in implementation. He presents expert guidance on accurately projecting demand and growth, planning and staffing, tool selection, process implementation, and much more. This book’s practical insights will be invaluable to every IT leader who wants to leverage ITIL’s best practices for capacity management, and for every business and technical manager who wants IT to deliver greater value, efficiency, and effectiveness. Coverage includes Making the business case for capacity management Establishing specific goals for capacity management Mastering ITIL capacity management terminology Predicting capacity in dynamic, fast-changing organizations Implementing systems that help you anticipate trends Defining capacity plans, staffing capacity management teams, and implementing ongoing processes Linking capacity with performance management and with other ITIL processes Selecting the right capacity management tools for your environment Integrating capacity issues into your IT project management discipline Using “business capacity planning” to help the entire business become more agile
Download or read book Capacity Management Review written by and published by . This book was released on 1992 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Resource Management and Capacity Planning Handbook A Guide to Maximizing the Value of Your Limited People Resources written by Jerry Manas and published by McGraw Hill Professional. This book was released on 2014-08-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE GUIDE TO MAXIMIZING LIMITED RESOURCES TO INNOVATE AND GROW Trying to accomplish too much with too few resources has become almost customary in business today. More often than not, though, all that we "accomplish" is delayed projects, mass confusion, and missed opportunities--not the achievement of business goals. The Resource Management and Capacity Planning Handbook helps you tackle the critical challenges of resource management and capacity planning head on by providing a proven tool for making the leap from chaos to control: the Capacity Quadrant, a framework for addressing visibility, prioritization, optimization of existing resources, and integrated planning and governance. The Resource Management and Capacity Planning Handbook demystifies the complexities of resource capacity and demand management and offers clear ways for maximizing your limited resources to drive business growth and sustainability. This groundbreaking guide includes: The latest benchmark data from a comprehensive study of resource management Case studies from organizations that have used the book's methods with great success Tools for overcoming common barriers and making decisions involving time capture, resource assignments, and competing priorities Recommendations on ownership of the organization's resource management and capacity planning functions Considerations for addressing the human side of resource management and capacity planning The Resource Management and Capacity Planning Handbook gives you the information, insight, and proven methods to take your company where it has never been before. PRAISE FOR THE RESOURCE MANAGEMENT AND CAPACITY PLANNING HANDBOOK "There are lots of leadership books, scores of human resources books, and plenty of project and portfolio management books. This is the first book dedicated to what is essentially the drivetrain of organizations--the effective use of its people toward its most important activities. This is Manas's best and most ambitious book yet." -- Judith E. Glaser, CEO, Benchmark Communications, Inc.; Chairman of The Creating WE Institute; and author of the bestselling Conversational Intelligence "Jerry's book and the Capacity Quadrant model he outlines give you a realistic view of your workforce and an approach to maximizing the 'people power' in your organization that's easy to understand and apply. It could very well help transform your company and make you a hero in the process!" -- Dave Garrett, President and CEO, ProjectManagement.com "Unlike lifeless products, people skills and capacity are difficult to measure and vary widely between 'good' days and 'bad' days. Manas steps nimbly through this minefield with solid evidence and practical advice--all laced together in an easy-to-read style." -- R. Max Wideman FCSCE, FEIC, FICE, FPMI "It didn't take me too long into reading when I realized how much we really needed this book. I wish we had it when we started implementing Resource Capacity Planning and Investment Planning. I will make sure all of my staff members have copies." -- Gary Merrifield, PMP, Manager, IT Project Delivery and Quality Assurance, Blue Cross Blue Shield of Louisiana "A great guide to the most important topic in management: how to maximize your limited people resources." -- Hans Heuschkel, Senior Business Intelligence Analyst/Project Manager, Swiss insurance company
Download or read book Capacity Management A Practitioner Guide written by Adam Grummitt and published by Van Haren. This book was released on 1970-01-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capacity Management is described in most key ITSM frameworks: ITIL, ISO 20000 Microsoft Operations Framework (MOF) and the Application Service Library (ASL) all note the importance of Capacity Management. This major title meets the need for an in-depth practical guide to this critical process. Written and reviewed by some of the world s most respected experts in this field it shows how Capacity Management best practice can support provision of a consistent, acceptable service level at a known and controlled cost. Practical advice covers the essential control of two balances: Supply versus demand and resources versus cost. In times of mean, frugal economic measures, it is essential to focus on those practices that are effective and yield practical results. In enlightened times of sustainability, it is also a requirement to find solutions that satisfy the criteria for 'greenness'. This excellent title shows how Capacity Management works not only within an IT environment but also why it is pivotal in meeting high profile business demands. Aligns with ISO/IEC 20000 and ITIL®ISO/IEC lists a set of required capacity management deliverablesITIL outlines what should be done in capacity managementthis book starts to describe how to do itCovers details of what capacity management is all about:what is capacity managementwhy do it benefits and cost-benefit analysishow to do it data-flows and activitieswho does it roles and perspectivesimplementation, maintenance, improvement, toolsProvides comprehensive templates and checklists:objectives, interfaces and data-flows, sub-practices and activitiesmetrics, application sizing parameters, data for modellingdeliverables, reports, CMMI levels, KPIs, risk matrixsample capacity plan
Download or read book Hospital Capacity Management written by Robbin Dick and published by CRC Press. This book was released on 2021-03-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hospital Capacity Management: Insights and Strategies details many of the key processes, procedures, and administrative realities that make up the healthcare system we all encounter when we visit the ED or the hospital. It walks through, in detail, how these systems work, how they came to be this way, why they are set up as they are, and then, in many cases, why and how they should be improved right now. Many examples pulled from the lifelong experiences of the authors, published studies, and well-documented case studies are provided, both to illustrate and support arguments for change. First and foremost, it is necessary to remember that the mission of our healthcare system is to take care of patients. This has been forgotten at times, causing many of the issues the authors discuss in the book including hospital capacity management. This facet of healthcare management is absolutely central to the success or failure of a hospital, both in terms of its delivery of care and its ability to survive as an institution. Poor hospital capacity management is a root cause of long wait times, overcrowding, higher error rates, poor communication, low satisfaction, and a host of other commonly experienced problems. It is important enough that when it is done well, it can completely transform an entire hospital system. Hospital capacity management can be described as optimizing a hospital’s bed availability to provide enough capacity for efficient, error-free patient evaluation, treatment, and transfer to meet daily demand. A hospital that excels at capacity management is easy to spot: no lines of people waiting and no patients in hallways or sitting around in chairs. These hospitals don’t divert incoming ambulances to other hospitals; they have excellent patient safety records and efficiently move patients through their organization. They exist but are sadly in the minority of American hospitals. The vast majority are instead forced to constantly react to their own poor performance. This often results in the building of bigger and bigger institutions, which, instead of managing capacity, simply create more space in which to mismanage it. These institutions are failing to resolve the true stumbling blocks to excellent patient care, many of which you may have experienced firsthand in your own visit to your hospital. It is the hope of the authors that this book will provide a better understanding of the healthcare delivery system.
Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use
Download or read book Capacity Planning for Web Services written by Daniel A. Menascé and published by Prentice Hall. This book was released on 2002 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: MenascT (computer science, George Mason U.) and Almeida (computer science, U. of Minas Gerais, Brazil) provide a quantitative analysis of Web service availability and a framework for understanding and planning Web services. They discuss benchmarking, load testing, workload forecasting, and performan
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Download or read book Internal Pricing written by Tim Baldenius and published by Now Publishers Inc. This book was released on 2009 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal Pricing surveys of the transfer pricing literature with a focus on commonly-used pricing schemes using incomplete contracting models. Chapter 2 develops the basic symmetric information model to compare the performance of cost-based and negotiated pricing in the absence of external input markets. Chapter 3 considers market-based pricing and the role of internal price adjustments; it ignores investments and focuses solely on trading incentives. Chapter 4 adds investments to the model of Chapter 3 and shows that investment opportunities further strengthen the case for internal adjustments. Chapter 5 reconsiders the initial analysis of Chapter 2 for the case of asymmetrically informed divisional managers. The book ends with the author's conclusions and an appendix including the mathematical proofs. A key theme running through Internal Pricing is that the firm's central office (i.e headquarters) plays a rather limited role in mediating individual transactions. This captures the stylized empirical fact that in most firms, headquarters designs the broad "rules of the game" by choosing a pricing mechanism and compensation contracts, but usually does not get involved in pricing on a product-by-product basis.
Download or read book The Art of Capacity Planning written by John Allspaw and published by "O'Reilly Media, Inc.". This book was released on 2008-09-23 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success on the web is measured by usage and growth. Web-based companies live or die by the ability to scale their infrastructure to accommodate increasing demand. This book is a hands-on and practical guide to planning for such growth, with many techniques and considerations to help you plan, deploy, and manage web application infrastructure. The Art of Capacity Planning is written by the manager of data operations for the world-famous photo-sharing site Flickr.com, now owned by Yahoo! John Allspaw combines personal anecdotes from many phases of Flickr's growth with insights from his colleagues in many other industries to give you solid guidelines for measuring your growth, predicting trends, and making cost-effective preparations. Topics include: Evaluating tools for measurement and deployment Capacity analysis and prediction for storage, database, and application servers Designing architectures to easily add and measure capacity Handling sudden spikes Predicting exponential and explosive growth How cloud services such as EC2 can fit into a capacity strategy In this book, Allspaw draws on years of valuable experience, starting from the days when Flickr was relatively small and had to deal with the typical growth pains and cost/performance trade-offs of a typical company with a Web presence. The advice he offers in The Art of Capacity Planning will not only help you prepare for explosive growth, it will save you tons of grief.
Download or read book Capacity and Inventory Planning for Make to Order Production Systems written by Klaus Altendorfer and published by Springer Science & Business Media. This book was released on 2013-07-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents different models for the simultaneous optimization problem of capacity investment and work release rule parameterization. The overall costs are minimized either including backorder costs or considering a service level constraint. The available literature is extended with the integration of a distributed customer required lead time in addition to the actual demand distribution. Furthermore, an endogenous production lead time is introduced. Different models for make-to-order production systems with one or multiple serial processing stages are developed. Capacity investment is linked to the processing rates of the machines or to the number of the machines. Results are equations for service level, tardiness, and FGI lead time in such a production system. For special cases with M/M/1 and M/M/s queues explicit solutions of the optimization problems or optimality conditions concerning capacity investment and work release rule parameterization are provided.
Download or read book Building Organizational Capacity written by J. Douglas Toma and published by JHU Press. This book was released on 2010-11-15 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every university or college president envisions bold initiatives—big projects intended to change the nature of an institution with significant implications across all sectors. How can leaders and senior managers charged with implementing reforms effectively frame their work and anticipate potential pitfalls? No organization can maximize its capacity, defined as the administrative foundation essential for establishing and sustaining initiatives, without considering its core elements individually and in concert, according to J. Douglas Toma. This book examines eight essential organizational elements—purposes, structure, governance, policies, processes, information, infrastructure, and culture—and illuminates their influence in strategic management through case studies at eight institutions. Building Organizational Capacity situates strategic management within the context of higher education, providing practitioners with the tools to better understand institutional challenges in accomplishing its missions and realizing its aspirations. Toma's clear and well-integrated review of the latest research, as well as his advice for decision makers applying the book's lessons in practice, ensures this volume's place in the growing literature on strategy and management in higher education.
Download or read book Encyclopedia of Production and Manufacturing Management written by Paul M. Swamidass and published by Springer Science & Business Media. This book was released on 2000-06-30 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production and manufacturing management since the 1980s has absorbed in rapid succession several new production management concepts: manufacturing strategy, focused factory, just-in-time manufacturing, concurrent engineering, total quality management, supply chain management, flexible manufacturing systems, lean production, mass customization, and more. With the increasing globalization of manufacturing, the field will continue to expand. This encyclopedia's audience includes anyone concerned with manufacturing techniques, methods, and manufacturing decisions.
