Download or read book Camera Aided Robot Calibration written by Hangi Zhuang and published by CRC Press. This book was released on 2018-04-24 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot calibration is the process of enhancing the accuracy of a robot by modifying its control software. This book provides a comprehensive treatment of the theory and implementation of robot calibration using computer vision technology. It is the only book to cover the entire process of vision-based robot calibration, including kinematic modeling, camera calibration, pose measurement, error parameter identification, and compensation. The book starts with an overview of available techniques for robot calibration, with an emphasis on vision-based techniques. It then describes various robot-camera systems. Since cameras are used as major measuring devices, camera calibration techniques are reviewed. Camera-Aided Robot Calibration studies the properties of kinematic modeling techniques that are suitable for robot calibration. It summarizes the well-known Denavit-Hartenberg (D-H) modeling convention and indicates the drawbacks of the D-H model for robot calibration. The book develops the Complete and Parametrically Continuous (CPC) model and the modified CPC model, that overcome the D-H model singularities. The error models based on these robot kinematic modeling conventions are presented. No other book available addresses the important, practical issue of hand/eye calibration. This book summarizes current research developments and demonstrates the pros and cons of various approaches in this area. The book discusses in detail the final stage of robot calibration - accuracy compensation - using the identified kinematic error parameters. It offers accuracy compensation algorithms, including the intuitive task-point redefinition and inverse-Jacobian algorithms and more advanced algorithms based on optimal control theory, which are particularly attractive for highly redundant manipulators. Camera-Aided Robot Calibration defines performance indices that are designed for off-line, optimal selection of measurement configurations. It then describes three approaches: closed-form, gradient-based, and statistical optimization. The included case study presents experimental results that were obtained by calibrating common industrial robots. Different stages of operation are detailed, illustrating the applicability of the suggested techniques for robot calibration. Appendices provide readers with preliminary materials for easier comprehension of the subject matter. Camera-Aided Robot Calibration is a must-have reference for researchers and practicing engineers-the only one with all the information!
Download or read book Camera aided Self calibration of Robot Manipulators written by Yan Meng and published by . This book was released on 2000 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robot Calibration written by Roger Bernard and published by Springer Science & Business Media. This book was released on 1993-10-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calibration is playing an increasingly important role in industrial robotics. Higher accuracy demands are being placed on flexible assembly and manufacturing systems which in turn require robot manufacturers to produce higher quality precision robots.
Download or read book Computer Vision Based Robot Calibration and Control written by Boris M. Preising and published by . This book was released on 1990 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Vision Based Robot Calibration Using Moving Cameras written by Kuanchih Wang and published by . This book was released on 1993 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Manipulator Calibration written by Benjamin W. Mooring and published by Wiley-Interscience. This book was released on 1991-03-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the details of the calibration process step-by-step, covering systems modeling, measurement, identification, correction and performance evaluation. Calibration techniques are presented with an explanation of how they interact with each other as they are modified. Shows the reader how to determine if, in fact, a robot problem is a calibration problem and then how to analyze it.
Download or read book Advances in Service and Industrial Robotics written by Carlo Ferraresi and published by Springer. This book was released on 2017-07-24 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017, held at the Polytechnic University of Turin, Italy, from June 21-23, 2017. The conference brought together academic and industrial researchers in robotics from 30 countries, the majority of them affiliated to the Alpe-Adria-Danube Region, and their worldwide partners. RAAD 2017 covered all major areas of R&D and innovation in robotics, including the latest research trends. The book provides an overview on the advances in service and industrial robotics. The topics are presented in a sequence starting from the classical robotic subjects, such as kinematics, dynamics, structures, control, and ending with the newest topics, like human-robot interaction and biomedical applications. Researchers involved in the robotic field will find this an extraordinary and up-to-date perspective on the state of the art in this area.
Download or read book L talonnage des robots manipulateurs industriels written by MAURINE Patrick and published by Lavoisier. This book was released on 2013-03-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruit d’une étroite collaboration entre la recherche universitaire et le monde de l’industrie, cet ouvrage traite de la robotique industrielle, et tout particulièrement de l’étalonnage des robots manipulateurs. Il développe les aspects suivants : la représentation des structures des robots manipulateurs sériels et parallèles ; les principes généraux de l’étalonnage ; les méthodes d’étalonnage spécifiques aux robots sériels et parallèles ; l’innovation en robotique, ses réussites et ses échecs. Théorique et pragmatique, il s’adresse aux étudiants et aux chercheurs, aux techniciens et aux ingénieurs et à tous ceux qui désirent appréhender la robotique industrielle. Patrick Maurine est maître de conférences à l’INSA de Rennes. Ses travaux portent sur la précision et l’étalonnage des robots manipulateurs industriels. Jean-François Quinet est consultant en robotique appliquée à l’ensemble de l’industrie internationale depuis 1973. Ses activités portent aussi sur la mesure tridimensionnelle statique et dynamique.
Download or read book Industrial Robotics written by and published by I-Tech. This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Robotics written by Bruno Siciliano and published by Springer. This book was released on 2016-07-27 with total page 2259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this handbook provides a state-of-the-art overview on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition of the handbook, edited by two internationally renowned scientists with the support of an outstanding team of seven part editors and more than 200 authors, continues to be an authoritative reference for robotics researchers, newcomers to the field, and scholars from related disciplines. The contents have been restructured to achieve four main objectives: the enlargement of foundational topics for robotics, the enlightenment of design of various types of robotic systems, the extension of the treatment on robots moving in the environment, and the enrichment of advanced robotics applications. Further to an extensive update, fifteen new chapters have been introduced on emerging topics, and a new generation of authors have joined the handbook’s team. A novel addition to the second edition is a comprehensive collection of multimedia references to more than 700 videos, which bring valuable insight into the contents. The videos can be viewed directly augmented into the text with a smartphone or tablet using a unique and specially designed app. Springer Handbook of Robotics Multimedia Extension Portal: http://handbookofrobotics.org/
Download or read book Artificial Intelligence Applications and Innovations written by John MacIntyre and published by Springer. This book was released on 2019-05-15 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th IFIP WG 12.5 International Conference on Artificial Intelligence Applications and Innovations, AIAI 2019, held in Hersonissos, Crete, Greece, in May 2019. The 49 full papers and 6 short papers presented were carefully reviewed and selected from 101 submissions. They cover a broad range of topics such as deep learning ANN; genetic algorithms - optimization; constraints modeling; ANN training algorithms; social media intelligent modeling; text mining/machine translation; fuzzy modeling; biomedical and bioinformatics algorithms and systems; feature selection; emotion recognition; hybrid Intelligent models; classification - pattern recognition; intelligent security modeling; complex stochastic games; unsupervised machine learning; ANN in industry; intelligent clustering; convolutional and recurrent ANN; recommender systems; intelligent telecommunications modeling; and intelligent hybrid systems using Internet of Things. The papers are organized in the following topical sections:AI anomaly detection - active learning; autonomous vehicles - aerial vehicles; biomedical AI; classification - clustering; constraint programming - brain inspired modeling; deep learning - convolutional ANN; fuzzy modeling; learning automata - logic based reasoning; machine learning - natural language; multi agent - IoT; nature inspired flight and robot; control - machine vision; and recommendation systems.
Download or read book Intelligent Manufacturing and Energy Sustainability written by A. N. R. Reddy and published by Springer Nature. This book was released on 2021-12-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes best selected, high-quality research papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2021) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, during June 18-19, 2021. It covers topics in the areas of automation, manufacturing technology and energy sustainability and also includes original works in the intelligent systems, manufacturing, mechanical, electrical, aeronautical, materials, automobile, bioenergy and energy sustainability.
Download or read book Advanced Mathematical Computational Tools in Metrology Testing VIII written by Franco Pavese and published by World Scientific. This book was released on 2009 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Advanced Mathematical And Computational Tools In Metrology And Testing Viii written by Franco Pavese and published by World Scientific. This book was released on 2009-04-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields.This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.
Download or read book Computational Kinematics written by Andrés Kecskeméthy and published by Springer Science & Business Media. This book was released on 2009-10-06 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational kinematics is an enthralling area of science with a rich spectrum of problems at the junction of mechanics, robotics, computer science, mathematics, and computer graphics. The present book collects up-to-date methods as presented during the Fifth International Workshop on Computational Kinematics (CK2009) held at the University of Duisburg-Essen, Germany. The covered topics include design and optimization of cable-driven robots, analysis of parallel manipulators, motion planning, numerical methods for mechanism calibration and optimization, geometric approaches to mechanism analysis and design, synthesis of mechanisms, kinematical issues in biomechanics, balancing and construction of novel mechanical devices, detection and treatment of singularities, as well as computational methods for gear design. The results should be of interest for practicing and research engineers as well as Ph.D. students from the fields of mechanical and electrical engineering, computer science, and computer graphics.
Download or read book Visual Sensing and its Applications written by Zhongxue Gan and published by Springer Science & Business Media. This book was released on 2011-12-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Visual Sensing and its Applications: Integration of Laser Sensors to Industrial Robots” provides comprehensive and up-to-date coverage of research and development on this robotic vision system. A laser-structured light is the main concern in discussions of visual sensing. Also addressed in this book are all components of the robotic vision system and an emphasis on how to increase the accuracy of the system using three levels of calibration. This includes calibration of the vision system (eye calibration), calibration of eye-to-hand configuration and calibration of robot kinematics (hand calibration). With the integration of the laser sensors to industrial robots numerous applications in the field of robotic welding, grinding, machining, inspection, and palletizing are illustrated based on practical engineering projects in order to demonstrate how the visual sensing is performed. The book will serve as a valuable resource for researchers and engineers in the areas of robotics and machine vision. Dr. Zhongxue Gan is a vice chairman and chief scientist of the ENN Group, China. He serves as a member of the National Energy Expert Consultation Committee of China and member of the National Coal Council of the USA. He is also a co-founder of Intersmart Robotic Systems Co. Ltd., China. He was a research fellow in flexible automation systems at ABB and a founding director of ABB Corporate Research Robot Laboratories, both in the USA and in China. Dr. Qing Tang is a co-founder and CEO of Intersmart Robotic Systems Co. Ltd., China and an adjunct professor in Physics at Sichuan University, China. He was a principle consulting engineer and project manager at the ABB Corporate Research Robot Laboratory in the USA.
Download or read book Advances in Italian Mechanism Science written by Vincenzo Niola and published by Springer Nature. This book was released on 2020-08-19 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd International Conference of IFToMM ITALY, held online on September 9-11, 2020. It includes peer-reviewed papers on the latest advances in mechanism and machine science, discussing topics such as biomechanical engineering, computational kinematics, the history of mechanism and machine science, gearing and transmissions, multi-body dynamics, robotics and mechatronics, the dynamics of machinery, tribology, vibrations, rotor dynamics and vehicle dynamics. A valuable, up-to-date resource, it offers an essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.
