Download or read book Cam Design and Manufacture Second Edition written by Preben W. Jensen and published by CRC Press. This book was released on 2020-08-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the methods of solving the problems connected with cams—their design, application, and manufacture. It introduces the improvement of numerically controlled machine tools and the availability of computers in general. The book is useful for practicing and design engineers.
Download or read book Cam Design and Manufacture Second Edition written by Jensen and published by CRC Press. This book was released on 1987-03-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the methods of solving the problems connected with cams--their design, application, and manufacture. It introduces the improvement of numerically controlled machine tools and the availability of computers in general. The book is useful for practicing and design engineers.
Download or read book Cam Design and Manufacturing Handbook written by Robert L. Norton and published by Industrial Press Inc.. This book was released on 2009 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of computers for engineering design, and in CNC for manufacturing, has dramatically changed the cam design and manufacturing process. Additionally, cam design and manufacturing have been affected by a significant number of fundamental research results published in recent years. This new edition offers changes which have been made throughout the book to update its information with the latest technology from the engineering literature and from the author's research and that of his students. Beginning at an introductory level and progressing to more advanced topics, this it provides all the information needed to properly design, model, analyze, specify, and manufacture cam-follower systems. It is truly a comprehensive resource that brings together up-to-date cam design technology, correct design and manufacturing procedures, and recent cam research results-all in one volume Additionally, this unique book is accompanied by a 90-day trial demonstration copy of the Professional Version of Dynacam. Written by the author and used worldwide, this program solves the equations described in the book and allows in its fully licensed version the design, dynamic modeling, analysis, and generation of follower center, cam surface, and cutter coordinate data for any cam. It also defines conjugate cams for any application. Includes a completely rewritten and updated chapter on splines, along with a discussion of shape-preserving splines as currently used for automotive valve-train cams. Features added coverage of multi-degree of freedom models and of followers with deliberate impact events within the chapter on dynamic modeling. Covers Globoidal cams in several chapters. Provides a definitive solution to the torque compensation cam design problem. Program Dynacam is much enhanced and improved and is available at a preferred price to purchasers of the book.
Download or read book Cam Design and Manufacture Second Edition written by Preben W. Jensen and published by CRC Press. This book was released on 2020-08-26 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the methods of solving the problems connected with cams—their design, application, and manufacture. It introduces the improvement of numerically controlled machine tools and the availability of computers in general. The book is useful for practicing and design engineers.
Download or read book Cam Design and Manufacture written by Frederic Burnham Jacobs and published by . This book was released on 1921 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book Cam Design Handbook written by Harold A. Rothbart and published by McGraw-Hill Professional Publishing. This book was released on 2004 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with hundreds of detailed illustrations! THE DEFINITIVE GUIDE TO CAM TECHNOLOGY! The transformation of a simple motion, such as rotation, into linear or other motion is accomplished by means of a cam -- two moving elements mounted on a fixed frame. Cam devices are versatile -- almost any specified motion can be obtained. If you work with industrial applications where precision is essential, the "Cam Design Handbook" is a key resource you'll need handy at all times. You'll find thorough, detailed coverage of cams in industrial machinery, automotive optimization, and gadgets and inventions. Written with tremendous practical insight by engineering experts, the "Cam Design Handbook" gathers the information you need to understand cam manufacture and design. Comprehensive in scope and authoritative in nature, the book delivers a firm grasp of: * The advantages of cams compared to other motion devices * Computer-aided design and manufacturing techniques * Numerical controls for manufacturing * Cam size and profile determination * Dynamics of high-speed systems Get comprehensive coverage of: * Basic curves * Profile geometry * Stresses and accuracy * Camwear life predictions * Cam system dynamics * And more!
Download or read book CAM DESIGN AND MANUFACTURE written by F. B. JACOBS and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cam Design Handbook written by Harold A. Rothbart and published by McGraw Hill Professional. This book was released on 2004 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with hundreds of detailed illustrations! THE DEFINITIVE GUIDE TO CAM TECHNOLOGY! The transformation of a simple motion, such as rotation, into linear or other motion is accomplished by means of a cam -- two moving elements mounted on a fixed frame. Cam devices are versatile -- almost any specified motion can be obtained. If you work with industrial applications where precision is essential, the "Cam Design Handbook" is a key resource you'll need handy at all times. You'll find thorough, detailed coverage of cams in industrial machinery, automotive optimization, and gadgets and inventions. Written with tremendous practical insight by engineering experts, the "Cam Design Handbook" gathers the information you need to understand cam manufacture and design. Comprehensive in scope and authoritative in nature, the book delivers a firm grasp of: * The advantages of cams compared to other motion devices * Computer-aided design and manufacturing techniques * Numerical controls for manufacturing * Cam size and profile determination * Dynamics of high-speed systems Get comprehensive coverage of: * Basic curves * Profile geometry * Stresses and accuracy * Camwear life predictions * Cam system dynamics * And more!
Download or read book Cam Design and Manufacture Classic Reprint written by F. B. Jacobs and published by . This book was released on 2015-08-05 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Cam Design and Manufacture Cam movements are among the most useful that the machine designer has at his command, for without them many complicated motions could not be laid out and constructed. When cams are laid out by cut-and-try methods (which is often the case), they are noisy in operation, create a vast amount of friction and are short-lived. On the other hand, if the curves are properly laid out, giving all possible time for the rises, the finished cams can be run at high speeds with very little noise or friction. Under these conditions, cams compare favorably in construction cost and maintenance cost with more complicated mechanical movements used for the same purpose. When it is considered that a practical knowledge of cam design and manufacture is easily acquired, it may seem strange that the majority of technical works on machine design treat this subject lightly; or at least from only a theoretical point of view. While it can not be claimed that any one person knows the whole subject thoroughly, it is certainly possible to explain some of the methods that are in actual use for laying out and cutting cams. The use of the various methods and appliances that are described is not confined to any one locality, by any means, as these methods and appliances have been found in practically every manufacturing center of the country. In the description of the various methods, the writer has avoided using complicated mathematical formulas as it is well known that very few men actually engaged in machine design and construction thoroughly understand them. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Cam Design and Manufacture written by Frederic Burnham Jacobs and published by . This book was released on 1922 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Development written by Anil Mital and published by Elsevier. This book was released on 2014-08-12 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product development teams are composed of an integrated group of professionals working from the nascent stage of new product planning through design creation and design review and then on to manufacturing planning and cost accounting. An increasingly large number of graduate and professional training programs are aimed at meeting that need by creating a better understanding of how to integrate and accelerate the entire product development process. This book is the perfect accompaniment and a comprehensive guide. The second edition of this instructional reference work presents invaluable insight into the concurrent nature of the multidisciplinary product development process. It can be used in the traditional classroom, in professional continuing education courses or for self-study. This book has a ready audience among graduate students in mechanical and industrial engineering, as well as in many MBA programs focused on manufacturing management. This is a global need that will find a receptive readership in the industrialized world particularly in the rapidly developing industrial economies of South Asia and Southeast Asia. - Reviews the precepts of Product design in a step-by-step structured process and focuses on the concurrent nature of product design - Helps the reader to understand the connection between initial design and interim and final design, including design review and materials selection - Offers insight into roles played by product functionality, ease-of assembly, maintenance and durability, and their interaction with cost estimation and manufacturability through the application of design principles to actual products
Download or read book CAD CAM Computer Aided Design and Manufacturing written by Groover and published by Pearson Education India. This book was released on 2013 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors examine interactive computer graphics and its use in designing industrial robots, computer control of manufacturing processes, computer-integrated production control, automated inspections, and flexible manufacturing systems. They also discuss the implementation of turnkey CAD/CAM systems.
Download or read book Maintenance Replacement and Reliability written by Andrew K.S. Jardine and published by CRC Press. This book was released on 2005-09-29 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the results of research in physical asset management, Maintenance, Replacement, and Reliability: Theory and Applications introduces students to the tools for making data-driven decisions and how to use them. The book offers a solid theoretical foundation for these tools, demonstrating applications through various case studies. Firmly rooted in reality, the applications covered relate to areas such as food processing, the military, mining, transportation, steel, and petrochemical and pharmaceutical industries. Ideal for classroom use, this text features supplementary software that can be downloaded from the CRC Web site. The downloadable educational versions of software packages include: OREST, SMS, EXAKT for CBM optimization, PERDEC, Workshop Simulator, Crew Size Optimizer, and WiebullSoft. This book can be used as a textbook for a one-semester senior undergraduate or postgraduate course on maintenance decision analysis. It provides problem sets with answers at the end of each chapter, an extensive set of PowerPoint slides covering the various chapters and appendices, a solutions manual for the problems in the book, and a bank of more than 100 examination questions. Instructors who adopt the book can obtain these resources at www.crcpress.com. The authors approach the topic with the ideology that mathematical modeling is not a spectator sport. Their examination of the underpinning theories for formulating models and exploration of real-world applications make the book both informative and practical. It provides professors with the tools they need to easily teach their students how to transform data into information.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Fundamentals of Natural Gas Processing written by Arthur J. Kidnay and published by CRC Press. This book was released on 2006-06-21 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Natural Gas Processing explores the natural gas industry from the wellhead to the marketplace. It compiles information from the open literature, meeting proceedings, and experts to accurately depict the state of gas processing technology today and highlight technologies that could become important in the future. This book cov
Download or read book Reliability Engineering written by Joel A. Nachlas and published by CRC Press. This book was released on 2005-04-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without proper reliability and maintenance planning, even the most efficient and seemingly cost-effective designs can incur enormous expenses due to repeated or catastrophic failure and subsequent search for the cause. Today’s engineering students face increasing pressure from employers, customers, and regulators to produce cost-efficient designs that are less prone to failure and that are safe and easy to use. An understanding of reliability principles and maintenance planning can help accomplish these conflicting goals. Presenting an integrated approach to reliability evaluation and maintenance planning, Reliability Engineering: Probabilistic Models and Maintenance Methods provides comprehensive coverage of the fundamental concepts of reliability theory, basic models, and various methods of analysis. It contains numerous examples and homework problems in each chapter. The first six chapters sequentially outline each basic concept of reliability theory, followed by two chapters on commonly used statistical methods for evaluating component reliability. The book concludes with five chapters on repairable systems and maintenance planning, a chapter devoted to special topics such as warranties, and appendices on numerical computation. With an accessible blend of mathematical rigor and readability, Reliability Engineering is the ideal introductory textbook for graduate students in reliability theory and engineering, repairable systems analysis, operations research methods, and applied random processes.
