Download or read book C and the 8051 Building efficient applications written by Thomas W. Schultz and published by Prentice Hall. This book was released on 1998 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written for experienced developers, uses examples and case studies, rather than rules and lessons. The 8051 family is the most popular chip used in consumer products today. This book is the companion volume to Schultz's earlier title, C and the 8051: Programming for Multitasking.
Download or read book C and the 8051 written by Thomas W. Schultz and published by PageFree Publishing, Inc.. This book was released on 2004 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This totally reworked book combines two previous books with material on networking. It is a complete guide to programming and interfacing the 8051 microcontroller-family devices for embedded applications.
Download or read book System on Chip for Real Time Applications written by Wael Badawy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-Chip for Real-Time Applications will be of interest to engineers, both in industry and academia, working in the area of SoC VLSI design and application. It will also be useful to graduate and undergraduate students in electrical and computer engineering and computer science. A selected set of papers from the 2nd International Workshop on Real-Time Applications were used to form the basis of this book. It is organized into the following chapters: -Introduction; -Design Reuse; -Modeling; -Architecture; -Design Techniques; -Memory; -Circuits; -Low Power; -Interconnect and Technology; -MEMS. System-on-Chip for Real-Time Applications contains many signal processing applications and will be of particular interest to those working in that community.
Download or read book Computer and Information Sciences ISCIS 2003 written by Adnan Yazici and published by Springer. This book was released on 2003-10-24 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Symposium on Computer and Information Sciences, ISCIS 2003, held in Antalya, Turkey in November 2003. The 135 revised papers presented together with 2 invited papers were carefully reviewed and selected from over 360 submissions. The papers are organized in topical sections on architectures and systems, theoretical computer science, databases and information retrieval, e-commerce, graphics and computer vision, intelligent systems and robotics, multimedia, networks and security, parallel and distributed computing, soft computing, and software engineering.
Download or read book System Specification Design Languages written by Eugenio Villar and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this fourth book in the CHDL Series, a selection of the best papers presented in FDL'02 is published. System Specification and Design Languages contains outstanding research contributions in the four areas mentioned above. So, The Analog and Mixed-Signal system design contributions cover the new methodological approaches like AMS behavioral specification, mixed-signal modeling and simulation, AMS reuse and MEMs design using the new modeling languages such as VHDL-AMS, Verilog-AMS, Modelica and analog-mixed signal extensions to SystemC. UML is the de-facto standard for SW development covering the early development stages of requirement analysis and system specification. The UML-based system specification and design contributions address latest results on hot-topic areas such as system profiling, performance analysis and UML application to complex, HW/SW embedded systems and SoC design.C/C++-for HW/SW systems design is entering standard industrial design flows. Selected papers cover system modeling, system verification and SW generation. The papers from the Specification Formalisms for Proven design workshop present formal methods for system modeling and design, semantic integrity and formal languages such as ALPHA, HANDLE and B.
Download or read book Data Conversion Handbook written by Walt Kester and published by Newnes. This book was released on 2005 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete update of a classic handbook originally created by Analog Devices and never previously published offers the most complete and up-to-date reference available on data conversion, from the world authority on the subject. It describes in depth the theory behind and the practical design of data conversion circuits. It describes the different architectures used in A/D and D/A converters - including many advances that have been made in this technology in recent years - and provides guidelines on which types are best suited for particular applications. It covers error characterization and testing specifications, essential design information that is difficult to find elsewhere. The book also contains a wealth of practical application circuits for interfacing and supporting A/D and D/A converters within an electronic system. In short, everything an electronics engineer needs to know about data converters can be found in this volume, making it an indispensable reference with broad appeal. The accompanying CD-ROM provides software tools for testing and analyzing data converters as well as a searchable pdf version of the text. * brings together a huge amount of information impossible to locate elsewhere. * many recent advances in converter technology simply aren't covered in any other book. * a must-have design reference for any electronics design engineer or technician
Download or read book Patterns for Time triggered Embedded Systems written by Michael J. Pont and published by Addison-Wesley Longman. This book was released on 2001 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains: Source code in 'C' for patterns and examples -- Evaluation version of the industry-standard Keil 'C' compiler and hardware simulator.
Download or read book C and the 8051 Hardware modular programming and multitasking written by Thomas W. Schultz and published by Prentice Hall. This book was released on 1998 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, everything from cell phones to microwaves to CD players all contain microcontrollers, or miniature computers, which need to be programmed to perform specific tasks. Designing such systems requires an understanding of both microprocessor electronics and programming languages. This book is written for the industrial electronics engineer who needs to use or switch to the Intel 8051 family of microcontrollers and implement it using a C programming language.
Download or read book Microcontroller Projects in C for the 8051 written by Dogan Ibrahim and published by Newnes. This book was released on 2000-06-05 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a thoroughly practical way to explore the 8051 and discover C programming through project work. Through graded projects, Dogan Ibrahim introduces the reader to the fundamentals of microelectronics, the 8051 family, programming in C, and the use of a C compiler. The specific device used for examples is the AT89C2051 - a small, economical chip with re-writable memory, readily available from the major component suppliers. A working knowledge of microcontrollers, and how to program them, is essential for all students of electronics. In this rapidly expanding field many students and professionals at all levels need to get up to speed with practical microcontroller applications. Their rapid fall in price has made microcontrollers the most exciting and accessible new development in electronics for years - rendering them equally popular with engineers, electronics hobbyists and teachers looking for a fresh range of projects. Microcontroller Projects in C for the 8051 is an ideal resource for self-study as well as providing an interesting, enjoyable and easily mastered alternative to more theoretical textbooks. Practical projects that enable students and practitioners to get up and running straight away with 8051 microcontrollers A hands-on introduction to practical C programming A wealth of project ideas for students and enthusiasts
Download or read book IEEE Circuits Devices written by and published by . This book was released on 2000 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.
Download or read book The 8051 Microcontroller Architecture Programming And Applications Second Edition written by Kenneth J Ayala and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.
Download or read book The 8051 Microcontroller written by Kenneth J. Ayala and published by Cengage Learning. This book was released on 2005 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain valuable assembly code programming knowledge with the help of this newly revised book. Readers will be trained on programming the Intel 8051 microcontroller, one of the most common microprocessors used in controls or instrumentation applications that use assembly code. The third edition teaches current principles of computer architecture including simulation and programming, with new state-of-the-art integrated development software that is included at the back of the book. The writing style engages readers and renders even complex topics easy to absorb. Practical examples of assembly code instructions illustrate how these instructions function. Complex hardware and software application examples are also provided.
Download or read book Building Embedded Systems written by Changyi Gu and published by Apress. This book was released on 2016-05-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop the software and hardware you never think about. We're talking about the nitty-gritty behind the buttons on your microwave, inside your thermostat, inside the keyboard used to type this description, and even running the monitor on which you are reading it now. Such stuff is termed embedded systems, and this book shows how to design and develop embedded systems at a professional level. Because yes, many people quietly make a successful career doing just that. Building embedded systems can be both fun and intimidating. Putting together an embedded system requires skill sets from multiple engineering disciplines, from software and hardware in particular. Building Embedded Systems is a book about helping you do things in the right way from the beginning of your first project: Programmers who know software will learn what they need to know about hardware. Engineers with hardware knowledge likewise will learn about the software side. Whatever your background is, Building Embedded Systems is the perfect book to fill in any knowledge gaps and get you started in a career programming for everyday devices. Author Changyi Gu brings more than fifteen years of experience in working his way up the ladder in the field of embedded systems. He brings knowledge of numerous approaches to embedded systems design, including the System on Programmable Chips (SOPC) approach that is currently growing to dominate the field. His knowledge and experience make Building Embedded Systems an excellent book for anyone wanting to enter the field, or even just to do some embedded programming as a side project. What You Will Learn Program embedded systems at the hardware level Learn current industry practices in firmware development Develop practical knowledge of embedded hardware options Create tight integration between software and hardware Practice a work flow leading to successful outcomes Build from transistor level to the system level Make sound choices between performance and cost Who This Book Is For Embedded-system engineers and intermediate electronics enthusiasts who are seeking tighter integration between software and hardware. Those who favor the System on a Programmable Chip (SOPC) approach will in particular benefit from this book. Students in both Electrical Engineering and Computer Science can also benefit from this book and the real-life industry practice it provides.
Download or read book Building an Effective IoT Ecosystem for Your Business written by Sudhi R. Sinha and published by Springer. This book was released on 2017-07-20 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This descriptive, practical guide explains how to build a commercially impactful, operationally effective and technically robust IoT ecosystem that takes advantage of the IoT revolution and drives business growth in the consumer IoT as well as industrial internet spaces. With this book, executives, business managers, developers and decision-makers are given the tools to make more informed decisions about IoT solution development, partner eco-system design, and the monetization of products and services. Security and privacy issues are also addressed. Readers will explore the design guidelines and technology choices required to build commercially viable IoT solutions, but also uncover the various monetization and business modeling for connected products.
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2000 with total page 1438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
