Download or read book Butyraldehyde Production from Propylene and Syngas Cost Analysis Butyraldehyde E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of n-Butyraldehyde production from propylene and syngas. The process examined is similar to the LP OXO technology jointly licensed by JM Davy and Dow, employing Selector 30 catalyst. In this process, the production ratio of n- to iso-butyraldehyde in the oxo reaction is about 30. The n-Butyraldehyde is separated as the final product and the isobutyraldehyde is obtained as a by-product. This report was developed based essentially on the following reference(s): Keywords: Oxo Synthesis, Butanal, Synthesis Gas, H2, CO, Hydrogen, Carbon Monoxide
Download or read book Butyraldehyde Production from Propylene and Syngas Cost Analysis Butyraldehyde E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of n-Butyraldehyde production from propylene and syngas. The process examined is similar to the technology jointly developed by Rhodia (former Rhône-Poulenc) and Ruhrchemie. This process relies on a water-soluble rhodium catalyst for the hydroformylation of propylene to form n-butyraldehyde and isobutyraldehyde. The n-Butyraldehyde is separated as the final product and the isobutyraldehyde is obtained as a by-product. This report was developed based essentially on the following reference(s): Keywords: Oxo Synthesis, Butanal, Synthesis Gas, H2, CO, Hydrogen, Carbon Monoxide, Rhodia, Rhône-Poulenc, Ruhrchemie
Download or read book 2 Ethylhexanol Production Process Cost Analysis 2 EH E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of 2-Ethylhexanol (2-EH) production from propylene and syngas. The process examined is similar to the LP OXO Selector technology jointly licensed by JM Davy and Dow. This report was developed based essentially on the following reference(s): (1) "OXO Synthesis", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) US Patent 5001274 issued to Union Carbide (now Dow Chemical Company) in 1991 (3) WO1993020034 issued to Davy (now subsidiary of Johnson Matthey) in 1993 Keywords: oxo alcohol, oxo process
Download or read book Methyl Methacrylate from Acetone Cost Analysis MMA E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from acetone, ammonia and natural gas The process examined is similar to Evonik Aveneer process. In this process, hydrogen cyanide, acetone and methanol are used as raw materials for the production of MMA. Different from the conventional acetone cyanohydrin (ACH) process, this process does not use sulfuric acid. The hydrogen cyanide used is generated from ammonia and natural gas in an on-site unit. This report was developed based essentially on the following reference(s): (1) US Patent 8569539, issued to Evonik in 2013 (2) US Patent 20120232305, issued to Evonik in 2012 (3) US Patent 20080194875, issued to Evonik in 2008 Keywords: Propanone, Hydrolysis, Transesterification, Dehydration, Prussic Acid
Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. Flow diagrams and descriptions of more than 250 leading-edge process technologies An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Download or read book Chemical Reaction Engineering written by Martin Schmal and published by CRC Press. This book was released on 2014-04-04 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reaction Engineering: Essentials, Exercises and Examples presents the essentials of kinetics, reactor design and chemical reaction engineering for undergraduate students. Concise and didactic in its approach, it features over 70 resolved examples and many exercises.The work is organized in two parts: in the first part kinetics is presented
Download or read book ICGSCE 2014 written by Md Amin Hashim and published by Springer. This book was released on 2015-06-15 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected papers from the ICGSCE 2014 with focus on the current trends of global resources used to meet the growing demands to improve life style coupled with environmental and social problems related to the resource consumption with emphasize to move towards sustainable development. It provides a platform for scientists and academicians from local and international universities and industries to promote, share and discuss various new issues and developments in different areas of Chemical Engineering with respect to global sustainability. Under the sustainability umbrella the topics covered are; alternative energy sources, alternative feedstock for energy and chemicals, alternative raw materials for household commodity, green process with minimal environmental impact, process intensification, waste minimization, recycling of wastes and providing quality water, food and medicines. Other topics covered include: 1. Oil and gas, Biofuel, Fuel cell, Renewable energy 2. Green technology, Sustainability, Environmental, Carbon sequestration, Carbon footprint, Natural resources 3. Chemical processes, Separation technology, Biotechnology, Nanotechnology, Food technology, Particle technology, Corrosion, Pharmaceutical, Phytochemical, Oleochemical 4. Process modeling, Process Simulation, Process control 5. Advanced material, Polymer, Catalyst, Enzyme 6. Policy, Regulations, Strategy and implementation, Safety, Management of science, Engineering education 7. Process Safety and Loss Prevention, Environmental and chemical risk assessment, Transportation risk analysis, Inherent safety.
Download or read book Hydrocarbon Biorefinery written by Sunil Kumar Maity and published by Elsevier. This book was released on 2021-09-02 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable production of hydrocarbon biofuels from biomass, fuels that are fully compatible with existing internal combustion engines, will allow the global transport economy to transition to a sustainable energy source without the need for capital-intensive new infrastructures. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels presents a comprehensive and easy to understand consolidation of existing knowledge for the production of hydrocarbon biofuels from biomass. Three major areas for the conversion of biomass to hydrocarbon biofuels are addressed: i) Chemical and thermochemical conversion processes, ii) Biological and biochemical conversion processes, and iii) Conversion processes of biomass-derived compounds. Additionally, the book includes process design, life cycle analysis of various processes, reaction engineering, catalysts, process conditions and process concepts, and is supported with detailed case studies. The economic viability of each process is specifically addressed to provide a clear guide for the economic development of future hydrocarbon biofuels. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels offers an all-in-one resource for researchers, graduate students, and industry professionals working in the area of bioenergy and will be of interest to energy engineers, chemical engineers, bioengineers, chemists, agricultural researchers, and mechanical engineers. Furthermore, this book provides structured foundational content on biorefineries for undergraduate and graduate students. Presents fundamental concepts and processes of hydrocarbon biofuel production, covering chemical, biological, and biomass-derived conversion processes Synthesizes the state-of-the-art research and commercial initiatives of this emerging concept into stand-alone chapters, serving as a structured resource for researchers and practitioners Emphasizes the process design and economic feasibility of each process using life cycle assessments to support commercial development
Download or read book Industrial Chemicals Via C1 Processes written by Darryl R. Fahey and published by . This book was released on 1987 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deactivation and Testing of Hydrocarbon processing Catalysts written by Paul O'Connor and published by . This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from a symposium of the 210th National Meeting of the American Chemical Society held in Chicago in August 1995, this volume is meant to serve as a practical reference focusing on testing for the main hydrocarbon-conversion processes applied in oil refineries: catalytic cracking, hydroprocessing, and reforming. The volume contains 31 contributions divided into the following categories: an overview, catalyst deactivation by coke, deactivation of fluid catalytic cracking catalysts, deactivation of reforming catalysts, deactivation of hydroprocessing catalysts, testing of catalyst performance, and modeling of catalyst performance. Amply illustrated with bandw diagrams. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Industrial Separation Processes written by André B. de Haan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processes on an industrial scale account for well over half of the capital and operating costs in the chemical industry. Knowledge of these processes is key for every student of chemical or process engineering. This book is ideally suited to university teaching, thanks to its wealth of exercises and solutions. The second edition boasts an even greater number of applied examples and case studies as well as references for further reading.
Download or read book Wood Chemistry and Wood Biotechnology written by Monica Ek and published by Walter de Gruyter. This book was released on 2009-12-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources. Volume 1 provides a survey of the biological and chemical structure of wood as well as an introduction to the chemical reactions used during pulp production processes. The work presents the different raw materials used for pulp production, the macroscopic and morphological construction of wood and related characterization methods, the chemical structure and arrangement of the wood polymers and extractives, biosynthesis of wood polymers, carbohydrate and lignin analysis, reactions of wood polymers in mechanical and chemical pulping and bleaching processes, biotechnical processes of relevance for the pulp and paper industry, different types of microorganisms and their modes of interaction with wood, the impact of chemical and microbiological processes on the hierarchical structure of wood and pulp.
Download or read book Enzyme Engineering written by Ichiro Chibata and published by Springer. This book was released on 1982-11-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presently, intensive and global attention is being devoted to "biotechnology"--the technology utilizing marvelous capacities of living things for human welfare. Each country is strongly promo ting its development. In particular, enzyme engineering, whose pur pose is to utilize efficiently enzymes, microorganisms, and cultured plant as well as animal cells as organic catalysts, is one of the main themes in the field of biotechnology. Under these circumstances, the Sixth Enzyme Engineering Confe rence was held at Kashikojima, Mie Prefecture, Japan from September 20 to 25, 1981, under the joint auspices of the Engineering Foun dation of New York and the Japanese Society of Enzyme Engineering. This series of international conferences has been held biannually since 1971. The first three and the fifth conferences were held in the United States and the fourth one was in the Federal Republic of Germany. This sixth conference was the first to be held in Asia; and it was significant that a number of participant£ could visit Japany, which has produced successful achievements in the field of biotechnology.
Download or read book Industrial Power Systems Handbook written by Donald Beeman and published by McGraw-Hill Companies. This book was released on 1955 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt:
