Download or read book Business Process Management Blockchain and Central and Eastern Europe Forum written by Claudio Di Ciccio and published by Springer Nature. This book was released on 2019-08-26 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the contributions presented at the Blockchain Forum and the Central and Eastern Europe Forum (CEE Forum) held at the 17th International Conference on Business Process Management, BPM 2019, which took place in Vienna, Austria, in September 2019. The Blockchain Forum deals with the use of blockchain for collaborative information systems. Conceptual, technical and application-oriented contributions are pursued within the scope of this theme. The Blockchain Forum received a total of 31 submissions; 10 full and 1 short paper were accepted for publication in this book. The objective of the CEE Forum is to foster discussion for BPM academics from Central and Eastern Europe to disseminate their research, compare results and share experiences. For the CEE Forum 16 submissions were received and 6 full and 2 short papers were accepted for publication. The book also contains one invited talk in full-paper length and 6 poster papers from the CEE Forum.
Download or read book Business Process Management Blockchain Robotic Process Automation and Central and Eastern Europe Forum written by Andrea Marrella and published by Springer Nature. This book was released on 2022-09-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Blockchain, Robotic Process Management (RPA), and Central and Eastern Europe (CEE) Forum which were held as part of the 20th International Conference on Business Process Management, BPM 2022, which took place in Münster, Germany, during September 11-15, 2022. The Blockchain Forum is dealing with techniques for and applications of blockchains, distributed ledger technologies, and related topics. "The RPA Forum brings together researchers from various communities to discuss challenges, opportunities, and new ideas related to robotic process automation and its application to business processes in private and public sectors." The CEE Forum provides a discussion platform for BPM academics from Central and Eastern Europe to disseminate their research, compare results and share experiences. The 20 papers presented in this volume were carefully reviewed and selected from a total of 40 submissions.
Download or read book Business Process Management Blockchain Robotic Process Automation and Central and Eastern Europe Forum written by Andrea Marrella and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Blockchain, Robotic Process Management (RPA), and Central and Eastern Europe (CEE) Forum which were held as part of the 20th International Conference on Business Process Management, BPM 2022, which took place in Münster, Germany, during September 11-16, 2022. The Blockchain Forum is dealing with techniques for and applications of blockchains, distributed ledger technologies, and related topics. The RPA Forum brings together researchers from various communities to discuss challenges, opportunities, and new ideas related to robotic process automation and its application to business processes in private and public sectors. The CEE Forum provides a discussion platform for BPM academics from Central and Eastern Europe to disseminate their research, compare results and share experiences. The 20 papers presented in this volume were carefully reviewed and selected from a total of 40 submissions.
Download or read book Business Process Management Blockchain Robotic Process Automation Central and Eastern European Educators and Industry Forum written by Claudio Di Ciccio and published by Springer Nature. This book was released on with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Business Process Management Blockchain Robotic Process Automation and Educators Forum written by Julius Köpke and published by Springer Nature. This book was released on 2023-09-04 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the BPM Forum held at the 21st International Conference on Business Process Management, BPM 2023, which took place in Utrecht, The Netherlands, in September 2023. The Blockchain Forum provided a platform for exploring and discussing innovative ideas on the intersection of BPM and blockchain technology. The RPA Forum focused on the use of the Robotic Process Automation (RPA) in the field of Business Process Management. The Educators Forum brought together educators within the BPM community for sharing resources to improve the practice of teaching BPM-related topics. The 18 full papers included in this volume were carefully reviewed and selected from a total of 39 submissions.
Download or read book Business Process Management Forum written by Chiara Di Francescomarino and published by Springer Nature. This book was released on 2023-08-31 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the BPM Forum held at the 21st International Conference on Business Process Management, BPM 2023, which took place in Utrecht, The Netherlands, in September 2023. The BPM Forum hosts innovative research which has a high potential of stimulating discussions. The papers selected for the forum are expected to showcase fresh ideas from exciting and emerging topics in BPM, even if they are not yet as mature as the regular papers at the conference. The 23 full papers included in this volume were carefully reviewed and selected from a total of 151 submissions to the conference. The papers were organized in research tracks on foundations, engineering, and management.
Download or read book Business Process Management Blockchain and Robotic Process Automation Forum written by José González Enríquez and published by Springer Nature. This book was released on 2021-08-21 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Blockchain and RPA Forum, held as part of the 19th International Conference on Business Process Management, BPM 2021, which took place during September 6-10, 2021, in Rome, Italy. The Blockchain Forum and the RPA Forum have in common that they are centered around an emerging and exciting technology. The blockchain is a sophisticated distributed ledger technology, while RPA software allows for mimicking human, repetitive actions. Each of these have the potential to fundamentally change how business processes are being orchestrated and executed in practice. The 8 papers presented in this volume were carefully reviewed and selected from a total of 14 submissions.
Download or read book Handbook on Business Process Management and Digital Transformation written by Paul Grefen and published by Edward Elgar Publishing. This book was released on 2024-08-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many organizations are currently undertaking digital transformation to improve their business processes and better achieve their goals. This Handbook provides a comprehensive overview of contemporary trends and research at the point where business process management and digital transformation meet. Presenting a multidisciplinary approach, it demonstrates the close link between these two fields through engagement with theory and practice.
Download or read book Blockchains written by Sushmita Ruj and published by Springer Nature. This book was released on with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Business Process Management Current Applications and the Challenges of Adoption written by Renata Gabryelczyk and published by Cognitione Foundation for Dissemination of Knowledge and Science. This book was released on 2020-01-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business Process Management (BPM) has been evolving for over 25 years in information systems research, management science, and organizational practice (Vom Brocke & Mendling, 2018). The earliest characteristics of BPM concentrated around process analysis, improvement and control, in a less strict manner that required reengineering (Elzinga, Horak, Lee, & Bruner, 1995). More mature approaches, observed since the year 2000, have been promoting the so-called process thinking, i.e. managing an organization from a process-based point of view. These approaches emphasize that process and team work oriented organizational structures should be aligned with other management systems. Process management should be holistic by its nature so as to cover an entire organization. Although BPM researchers stressed the need for system thinking at that time, published literature distinguished two perspectives of looking at BPM: the organizational perspective and the technological perspective of BPM. From the organizational perspective, authors focused on a number of key factors, i.e., process governance, a process-based organizational structure concept, customer orientation of internal and external processes, managing an organization based on process outputs, building process relations, and improving process maturity throughout the customer value chain, as well as through strategically aligning process initiatives to organizational objectives. From the technological perspective, the key factors of interest to authors, referred to as BPMS (Business Process Management System), include IT methods, techniques and tools that support the designing, implementation, modeling and simulation of business processes and are considered to be an extension of classical workflow systems or an environment for designing management support IT systems, e.g. ERP class systems. An integrated and interdisciplinary approach was proposed in the framework of six core BPM elements required for the holistic and sustainable use of process management (Rosemann & Vom Brocke, 2010). These include strategic alignment, governance, methods, information technology, people and culture. In this sense, technology is only one of six closely interrelated elements. Currently, there are two distinct directions in the evolution of BPM: traditional BPM and digital BPM. The former encompasses methods, techniques and systems that traditionally lead to increased organizational efficiency and to improved process effectiveness and flexibility. Although studies on BPM have been continuously evolving, some research gaps still remain open. The traditional understanding of process management seems particularly vital to organizations in developing economies, which sometimes follow practices and models that were designed and tested in highly developed countries, but should also be committed to drawing on their own experience and understanding of their local business environment (Gabryelczyk & Roztocki, 2018). Research on BPM in this traditional focus is still needed to better document, implement and improve idiosyncratic business processes in the context of an organization, environment, culture, and country. This is also confirmed by research conducted under the JEMI Special Issue on Business Process Management. Besides the traditionally shaped approach to BPM, organizations increasingly treat BPM as a driver of organizational innovation and as an essential part of the digital transformation (Vom Brocke & Schmiedel, 2015). New digital technologies such as social media, digital platforms, big data and advanced data analytics, blockchains, robotics, etc., enable development and growth in a constantly changing environment. To take advantage of these opportunities in the digital world, organizations require new BPM competences and capabilities. However, digital disruption creates quite a challenge for the BPM research community. How can BPM capabilities be developed in order to achieve adaptability, growth, flexibility, and agility? How can BPM foster innovations within and throughout organizations? These are just some of the issues for future BPM-related research. Threads associated with employing BPM for digital transformation have been included in a proposed Special Issue on BPM. This Special Issue on BPM consists of six articles including contributions from invited authors from three transition economies: Croatia, Slovakia, and Poland. All of the papers focus on applications of the process approach to management or directly to the adoption of Business Process Management. The majority of articles relate to the traditional BPM thread, although the indicated BPM alliances with other concepts such as Knowledge Management, Change Management, and Project Management are worthy of note. Only one article addresses the topic of BPM in the context of digital transformation. The nature and structure of these articles may be indicative of the current motivational factors and process maturity levels of organizations adopting ordinary and/or advanced BPM practices. When analyzing the content of individual articles, we pay attention to the factors underlying BPM adoption. We understand the primary motivation to be the expected benefits from BPM. Therefore, we can assume this Special Issue to be a contribution to BPM development in the form of the indicating motivation and triggers for BPM adoption. The first paper, by Jerzy Auksztol and Magdalena Chomuszko, proposes a process-based approach to construct a Data Control Framework for Standard Audit File for Tax (SAF-T). The process approach is used to redesign the internal financial control processes and procedures of an organization to meet the new requirements of a fiscal audit. The process approach, combined with risk management and quality management, is, therefore, a tool supporting entrepreneurs adapting to new regulations imposed on them by their external environment, particularly those of tax authorities. Therefore, in this case, the main motivation for adopting elements of BPM was the impact of external environment factors. The paper by Ana-Marija Stjepić, Lucija Ivančić, and Dalia Suša Vugec focuses on the link between Business Process Management and digital transformation. The authors have developed a theoretical framework for the emerging role of BPM in digitalization and as a guide for researchers and practitioners conducting digital transformation initiatives in organizations. The results obtained in the article prove that the set goals and expected benefits of digital transformation can be achieved by a rethink and improvement of the processes, with a particular focus on end-to-end customer processes through supply chain management. Based on this article, we can conclude that one of the main motivational factors for BPM adoption is a desire to obtain the benefits of digital transformation. The article written by Miroslava Nyulásziová and Dana Paľová takes up the issues of using and linking the process approach and BPM lifecycle with the designing of decision support systems. The authors of this paper have developed an innovative system for decision support by implementing modeling, analysis, and improvement methods to the transportation process in the studied organization. The forwarding company’s case study presented in the paper also shows how BPM adoption began with a single main process that has been streamlined and automated. Therefore, the motivations for BPM adoption were not only operational, relating to the optimization of the cost of the process, but also managerial, oriented on improving the decision-making process. The use of information technology allowed the full exploitation of the potential for process improvements. The next paper by Olga Sobolewska is about incorporating the issues of BPM into the contemporary challenges of network organizations. The author claims that the organization’s orientation towards both business processes and knowledge management is a strong success factor for network cooperation. The author argues that modern organizations should focus on managing knowledge-oriented processes to become attractive to cooperation partners for network organizations. In this article, BPM adoption is of a strategic nature for the purposes of undertaking new forms of cooperation. The paper by Hubert Bogumił has an interdisciplinary character and, in a unique way, shows the connections between the concepts of process management, organizational change management, and IT project management. The author undertook the challenge of examining how problems for organizations managing IT projects facilitate in different ways the use of distinctive approaches to improve business processes. The author emphasizes that the main difficulty is the fact that modern organizations most often use a hybrid approach, with elements of both traditional project management and agile. The need to create a work environment that takes into account the risk of unexpected system and business regression, as well as a diagnosis of the causes and methods of its mitigation, is the initial research result in this paper. This article contributes to the development of BPM governance and integration of IT governance. The motivational factors for BPM are multi-faceted, as is the scope of the article. However, their managerial and cultural character (related to methods of communication and rules of cooperation in teams) should be emphasized. The article by Agnieszka Bitkowska concerns the integration of the concept of Knowledge Management and BPM. The author restates in her article that the identification, acquisition, presentation and documentation of knowledge are not independent tasks, but are implemented within business processes. In this paper, the correlations between BPM and Knowledge Management have been examined and the benefits and practical implications resulting from the integrated implementation of both concepts are emphasized. In the case of this article, BPM adoption can be a success factor for the implementation of Knowledge Management and the achievement of associated benefits. Studying Business Process Management from the different angles presented in this Special Issue should enrich our understanding of current BPM practices and better realize future challenges, especially those related to BPM development in the context of digital transformation and the integration of BPM with other management-related concepts. In addition, the contribution made by the authors of this Special Issue allowed us to see various motivations and triggers for BPM adoption, from operational, to managerial, strategic, cultural and technological ones, and those driven by the external environment. We would like to thank the authors for their contribution to this Special Issue. We would also like to thank all the reviewers for their valuable comments, which helped the authors improve their articles significantly. We are firmly convinced that the BPM research results presented in this Special Issue will help strengthen the existing body of BPM knowledge. We recommend reading the related issue of the JEMI journal to the wider community of BPM researchers, practitioners, and enthusiasts. Guest Editors Renata Gabryelczyk , Tomislav Hernaus Acknowledgments The editorial work on this Special Issue was supported by the Polish National Science Centre, Poland, Grant No. 2017/27/B/HS4/01734. References Elzinga, D. J., Horak, T., Lee, C.-Y., & Bruner, C. (1995). Business process management: Survey and methodology. IEEE Transactions on Engineering Management, 42(2), 119-128. http://dx.doi.org/10.1109/17.387274 Gabryelczyk, R., & Roztocki, N. (2018). Business process management success framework for transition economies. Information Systems Management, 35(3), 234-253. http://dx.doi.org/10.1080/10580530.2018.1477299http://dx.doi.org/10.1080/10580530.2018.1477299 Rosemann, M., & Vom Brocke, J. (2010). The six core elements of business process management. In Handbook on Business Process Management 1. Cham: Springer. Vom Brocke, J., & Mendling, J. (Eds.). (2018). Business Process Management Cases. Digital Innovation and Business Transformation in Practice. Berlin: Springer. Vom Brocke, J., & Schmiedel, T. (Eds.). (2015). BPM-Driving Innovation in a Digital World. Cham: Springer.
Download or read book Blockchain and Robotic Process Automation written by Agnes Koschmider and published by Springer Nature. This book was released on 2022-01-01 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book integrates the material of the lecture series “Blockchain and Robotic Process Automation”, offered at Kiel University. The lecture series sheds light on current research topics on blockchain and robotic process automation (RPA) also in combination with business process management (BPM) or process mining. In this series, leading scientists and business experts give insights into the use of the blockchain technology and RPA. The seven contributions included offer a general introduction into blockchain and smart contracts, and detail the extraction of meaningful events for process mining from blockchain, challenges of blockchain-based collaborative business processes, executing Decision Model and Notation decisions on the blockchain, a blockchain-based solution for digital payment, blockchain use cases in transportation and logistics, and automatically identifying process automation candidates using natural language processing. Overall, the book provides researchers and graduate students with a basic introduction into blockchain, its applications, useful combinations of BPM and blockchain, and use cases for RPA.
Download or read book Application and Adoption of Robotic Process Automation for Smart Cities written by Tailor, R.K. and published by IGI Global. This book was released on 2023-10-25 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present era, technological developments are increasing the efficiency and potential of each stakeholder in a business. Robotic process automation is one of the key areas that can be applied in business organizations and corporate sectors to enhance productivity and show a path to success. Application and Adoption of Robotic Process Automation for Smart Cities provides relevant theoretical frameworks and various developments in the area of robotic process automation. Covering topics such as banking and financial services, public engagement, and smart cities, this premier reference source is a valuable resource for business leaders, IT managers, government officials, engineers, students and educators of higher education, researchers, and academicians.
Download or read book Artificial Intelligence for Future Generation Robotics written by Rabindra Nath Shaw and published by Elsevier. This book was released on 2021-06-19 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence for Future Generation Robotics offers a vision for potential future robotics applications for AI technologies. Each chapter includes theory and mathematics to stimulate novel research directions based on the state-of-the-art in AI and smart robotics. Organized by application into ten chapters, this book offers a practical tool for researchers and engineers looking for new avenues and use-cases that combine AI with smart robotics. As we witness exponential growth in automation and the rapid advancement of underpinning technologies, such as ubiquitous computing, sensing, intelligent data processing, mobile computing and context aware applications, this book is an ideal resource for future innovation. - Brings AI and smart robotics into imaginative, technically-informed dialogue - Integrates fundamentals with real-world applications - Presents potential applications for AI in smart robotics by use-case - Gives detailed theory and mathematical calculations for each application - Stimulates new thinking and research in applying AI to robotics
Download or read book Business Process Management Workshops written by Jochen De Weerdt and published by Springer Nature. This book was released on 2024-02-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised papers from the International Workshops held at the 21st International Conference on Business Process Management, BPM 2023, in Utrecht, The Netherlands, during September 2023. Papers from the following workshops are included:• 7th International Workshop on Artificial Intelligence for Business Process Management (AI4BPM 2023)• 7th International Workshop on Business Processes Meet Internet-of-Things (BP-Meet-IoT 2023)• 19th International Workshop on Business Process Intelligence (BPI 2023)• 16th International Workshop on Social and Human Aspects of Business Process Management (BPMS2 2023)• 2nd International Workshop on Data-Driven Business Process Optimization (BPO 2023)• 11th International Workshop on Declarative, Decision and Hybrid Approaches to Processes (DEC2H 2023)• 1st International Workshop on Digital Twins for Business Processes (DT4BP 2023)• 1st International Workshop on Formal Methods for Business Process Management (FM-BPM 2023) • 2nd International Workshop on Natural Language Processing for Business Process Management (NLP4BPM 2023)• 1st International Workshop on Object-Centric Processes from A to Z (OBJECTS 2023)• 3rd International Workshop on Change, Drift, and Dynamics of Organizational Processes (ProDy 2023) Each of the workshops focused on particular aspects of business process management. Overall, after a thorough review process, 42 full papers were selected from a total of 86 submissions.
Download or read book Secure by Design Enterprise Architectures and Business Processes in Supply Chains Handling Threats from Physical Transport Goods in Parcel Mail Services written by Michael Middelhoff and published by Logos Verlag Berlin GmbH. This book was released on with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply chain security encompasses measures preventing theft, smuggling, and sabotage through heightened awareness, enhanced visibility, and increased transparency. This necessitates the adoption of a security-by-design paradigm to achieve effective and efficient security measures, yielding additional benefits such as diminished supply chain costs. Given their vulnerability, transportation and logistics service providers play a pivotal role in supply chain security. This thesis leverages systems security engineering and security-by-design to provide a methodology for designing and evaluating security measures for physical transport goods. It formulates nine principles that define security-by-design and establishes a supply chain security framework. An adaptation of the TOGAF architecture development facilitates the creation of secure-by-design enterprise architectures. Security measures are documented using security-enhanced processes based on BPMN. This enables an analysis and compliance assessment to ascertain the alignment of security with business objectives and the adequate implementation of requirements. The culmination of these efforts is exemplified through a case study.
Download or read book Computational Intelligence in the Industry 4 0 written by Anil Kumar Dubey and published by CRC Press. This book was released on 2024-06-06 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the importance of using industrial intelligence in collaboration with computational intelligence in forming a smart system for diverse applications. It further illustrates the challenges and deployment issues in industrial resolution. The text highlights innovation and applications of computational agents and the industrial intelligence era to automate the requirements as per Industry 4.0. This book: Discusses computational agents for handling automation issues and the role of ethics in industrial resolution Presents intelligence approaches for products, operations, systems, and services Illustrates the fundamentals of computational intelligence to forecast and analyze the requirements of society for automation as well as recent innovations and applications Highlights computation intelligence approaches in reducing human effort and automating the analysis of the production unit Showcases current innovation and applications of computational agents and industrial intelligence as per Industry 4.0 The text is primarily written for senior undergraduate and graduate students, and academic researchers in diverse fields including electrical engineering, electronics, and communication engineering, industrial engineering, manufacturing engineering and computer science, and engineering.
Download or read book Data Centric Business and Applications written by Peter Štarchoň and published by Springer Nature. This book was released on with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt:
