Download or read book Bulk Amorphous Alloys written by Akihisa Inoue and published by . This book was released on 1998 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews this new group of alloys, discussing high glass-forming ability; compositional dependence of the dominant factors for glass formation; continuous cooling transformation behavior of supercooled liquid; critical cooling rate for glass formation; preparation methods; compositional dependence of maximum sample thickness; structural relaxation and thermal stability; and physical properties such as viscosity and electrical resistivity. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Bulk Amorphous Alloys Preparation and Fundamental Characteristics written by A. Inoue and published by Trans Tech Publications Ltd. This book was released on 1998-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in bulk amorphous alloys has increased rapidly throughout the world and these materials have now gained a position of great importance in basic science and engineering materials technology. Bulk amorphous alloys based upon the Zr-Al-Ni-Cu, Zr-(Ti,Nb)-Al-Ni-Cu and Zr-Ti-Ni-Cu-Be systems have already achieved wide commercial success as components of various tehnical accessories ranging from sporting goods to optical instruments. Here is a state-of-the art review on this new group of materials, covering all areas of interest, ranging from the synthesis of these special alloys and their fundamental properties, to their engineering characteristics and applications. This work will therefore be of equal interest to those who wish to become fully acquainted with the subject, and to those who are already actively engaged in the field.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2011-06-03 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the large amount of research activity in this subfield of materials science and engineering, there is no single book available that provides background information, methods of synthesis, characterization procedures, properties, and potential and existing applications.of bulk metallic glasses. Written in an easy-to-understand style by pioneering researchers in this field, Bulk Metallic Glasses is one of the first books to coherently discuss the synthesis, processing, properties, and applications of these unique materials. The book explores the differences between nanocrystalline, glassy, and amorphous solids as well as the thermodynamics and kinetics and various processing methods of glass formation. It critically compares the different criteria for glass formation, describes the advantages and limitations of experimental methods for synthesizing bulk metallic glasses in assorted sizes and shapes, and examines the kinetics of crystallization/devitrification and the mechanisms of transformations. It also covers the density, diffusivity, thermal expansion, electrical resistivity, specific heat, viscosity, corrosion resistance, mechanical behavior, and magnetic properties of bulk metallic glasses. After presenting a wide array of applications, the book concludes with a discussion on the future of these materials. The adoption of bulk metallic glasses into existing systems is besieged by many obstacles but due to their interesting combination of properties, future applications may be unlimited. A one-stop resource on all aspects of bulk metallic glasses, this book demonstrates the immense potential of these novel materials. It clearly elucidates the background, detailed methods of synthesis and characterization, structure, and properties of bulk metallic glasses.
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Download or read book Amorphous and Nanocrystalline Materials written by A. Inoue and published by Springer Science & Business Media. This book was released on 2001-01-18 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous and nanocrystalline materials are a class of their own. Their properties are quite different to those of the corresponding crystalline materials. This book gives systematic insight into their physical properties, structure, behaviour, and design for special advanced applications.
Download or read book Materials Processing Handbook written by Joanna R. Groza and published by CRC Press. This book was released on 2007-03-28 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of materials science and engineering is rapidly evolving into a science of its own. While traditional literature in this area often concentrates primarily on property and structure, the Materials Processing Handbook provides a much needed examination from the materials processing perspective. This unique focus reflects the changing comple
Download or read book Solidification and Crystallization Processing in Metals and Alloys written by Hasse Fredriksson and published by John Wiley & Sons. This book was released on 2012-08-13 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification and Crystallization Processing in Metals and Alloys Hasse Fredriksson KTH, Royal Institute of Technology, Stockholm, Sweden Ulla Åkerlind University of Stockholm, Sweden Solidification or crystallization occurs when atoms are transformed from the disordered liquid state to the more ordered solid state, and is fundamental to metals processing. Conceived as a companion volume to the earlier works, Materials Processing during Casting (2006) and Physics of Functional Materials (2008), this book analyzes solidification and crystallization processes in depth. Starting from the thermodynamic point of view, it gives a complete description, taking into account kinetics and mass transfer, down to the final structure. Importantly, the book shows the relationship between the theory and the experimental results. Topics covered include: Fundamentals of thermodynamics Properties of interfaces Nucleation Crystal growth - in vapours, liquids and melts Heat transport during solidification processes Solidification structures - faceted, dendritic, eutectic and peritectic Metallic glasses and amorphous alloy melts Solidification and Crystallization Processing in Metals and Alloys features many solved examples in the text, and exercises (with answers) for students. Intended for Masters and PhD students as well as researchers in Materials Science, Engineering, Chemistry and Metallurgy, it is also a valuable resource for engineers in industry.
Download or read book Alloys and Intermetallic Compounds written by Cristina Artini and published by CRC Press. This book was released on 2017-07-12 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of alloys. The book emphasizes the correlation between modeling and technological developments while discussing topics such as wettability of Ultra High Temperature Ceramics by metals, active brazing of diamonds to metals in cutting tools, surface issues in medicine, novel Fe-based superconductors, metallic glasses, high entropy alloys, and thermoelectric materials.
Download or read book Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors written by Bogdan Idzikowski and published by Springer Science & Business Media. This book was released on 2005-07-18 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic (magnetic and non-magnetic) nanocrystalline materials have been known for over ten years but only recent developments in the research into those complex alloys and their metastable amorphous precursors have created a need to summarize the most important accomplishments in the field. This book is a collection of articles on various aspects of metallic nanocrystalline materials, and an attempt to address this above need. The main focus of the papers is put on the new issues that emerge in the studies of nanocrystalline materials, and, in particular, on (i) new compositions of the alloys, (ii) properties of conventional nanocrystalline materials, (iii) modeling and simulations, (iv) preparation methods, (v) experimental techniques of measurements, and (vi) different modern applications. Interesting phenomena of the physics of nanocrystalline materials are a consequence of the effects induced by the nanocrystalline structure. They include interface physics, the influence of the grain boundaries, the averaging of magnetic anisotropy by exchange interactions, the decrease in exchange length, and the existence of a minimum two-phase structure at the atomic scale. Attention is also paid to the special character of the local atomic ordering and to the corresponding interatomic bonding as well as to anomalies and particularities of electron density distributions, and to the formation of metastable, nanocrystalline (or quasi-crystalline) phases built from exceptionally small grains with special properties. Another important focus of attention are new classes of materials which are not based on new compositions, but rather on the original and special crystalline structure in the nanoscale.
Download or read book Properties And Applications Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2009-08-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the second of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors written by Peter Švec and published by Springer Science & Business Media. This book was released on with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials II written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2007-07-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.
Download or read book Frontiers in Materials Science written by B. Raj and published by Universities Press. This book was released on 2005 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents contributions by a galaxy of eminent scientists and technologists from the world over in broad spectrum of areas in materials science, providing a global perspective on complex issues of current concern and the direction of research in these areas.
Download or read book Metallic Amorphous Alloy Reinforcements in Light Metal Matrices written by S. Jayalakshmi and published by Springer. This book was released on 2015-02-24 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on the design and development of novel, advanced high-strength, light-weight materials via the incorporation of novel reinforcements, namely, metallic amorphous alloys/bulk metallic glasses (BMG), in light metal matrix composites (LMMCs) based on Al and Mg. The book begins with an introduction to conventional ceramic reinforced light metal matrix composites, along with the major drawbacks which limit their application. Metallic amorphous alloys/Bulk Metallic Glasses (BMG) are new class of metallic materials that are distinctly differently from conventional metals/alloys in terms of their structure and thermal behavior, and exhibit extremely high strength (1 to 2 GPa) and large elastic strain limit (1 to 2%). Given these unique properties, upon their incorporation into Al/Mg-matrices, they provide superior interfacial properties, i.e. high degree of compatibility with the matrix due to their metallic nature when compared to conventional ceramic reinforcements, and thereby significantly enhance the mechanical performance of LMMCs. Amorphous/BMG reinforced LMMCs is an emerging research field and the existing literature is meager. This book discusses the various processing methods that would be suitable for these novel materials. A comparison of mechanical properties and strengthening mechanisms of amorphous/BMG reinforced composites with those of conventional ceramic composites is presented. Future research directions and wider research potential of the novel materials are discussed, and prospective applications are highlighted. For ease of understanding and comparison, appropriate schematics, tables, and figures are provided.
Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials III written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2010-09-29 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume features 59 peer-reviewed papers from ICCCI2009 on interface characterization and control technology, powder and composite processing, joining, the control of airborne particulates, new metallic glasses, and interface phenomena at high temperature. ICCCI2009 was supported by the Global COE Program “Center of Excellence for Advanced Structural and Functional Materials Design” lead by Professor Tomoyuki Kakeshita at Osaka University, the Project on Joining Technology for New Metallic Glasses and Inorganic Materials, the Institute of Materials Research (IMR) of Tohoku University, the Materials and Structures Laboratory (MSL) of the Tokyo Institute of Technology, Kobe Gakuin University, Hosokawa Powder Technology Foundation, the Japan JSPS 124th Committee, and the Joining and Welding Research Institute (JWRI) of Osaka University. Over 160 scientists and engineers from academia and industry from 18 different countries attended ICCCI2009 to see and discuss 140 invited and contributed presentations and posters on the state-of-the-art of interface characterization and control for particulate materials, joining, and nanotechnology.
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Amorphous and Nanocrystalline Materials written by A. Inoue and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous and nanocrystalline materials are a class of their own. Their properties are quite different to those of the corresponding crystalline materials. This book gives systematic insight into their physical properties, structure, behaviour, and design for special advanced applications.
