Download or read book Buildings and Constructed Assets Service Life Planning Procedures for Considering Environmental Impacts written by British Standards Institute Staff and published by . This book was released on 2004-09-21 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings, Construction systems, Life (durability), Planning, Life cycle, Environmental engineering, Environmental management, Quality auditing, Maintenance, Design
Download or read book Buildings and Constructed Assets Service Life Planning written by and published by . This book was released on 2004 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Procedures for Considering Environmental Impacts written by International Organization for Standardization and published by . This book was released on 2004 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Sustainability in Building Design and Construction written by Xiaoming Wang and published by Springer Nature. This book was released on 2022-01-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph offers analyses of construction activities using various key concepts and assessments of sustainable development, and provides students and researchers with methodologies and design aspects for the sustainable development of the built environment. Additionally, the book demonstrates various national and international policies for assisting architects, engineers and policy makers in understanding the relevant decision-making approaches to sustainable development in construction. The book begins by reviewing the background of sustainability and sustainable development. The focus then turns to the effects of climate change on the built environment, including impacts of energy and carbon emissions, as well as constraints on water and waste management. The remaining chapters discuss the necessary approaches to achieve sustainable waste management, energy efficient building design, and resilience and adaptation in the built environment In eight chapters, the book encourages readers to think independently, logically and objectively about the complex issues presented by the applications of sustainable development in construction, including resource efficiency, environmental impacts, human health, building economics and social development.
Download or read book Ferry and Brandon s Cost Planning of Buildings written by Richard Kirkham and published by John Wiley & Sons. This book was released on 2014-09-29 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the classic quantity surveying textbook retains its basic structure but has been thoroughly updated to reflect recent changes in the industry, especially in procurement. Although over the last 20 years a number of new procurement methods have evolved and become adopted, the recession has seen many clients revert to established traditional methods of procurement so the fundamentals of cost planning still apply - and should not be ignored. The first edition of this leading textbook was published in 1964 and it continues to provide a comprehensive introduction to the practice and procedures of cost planning in the procurement of buildings. This 9th edition has been thoroughly updated to reflect changes that have occurred in the UK construction industry in the past six years. Whilst retaining its core structure of the three-phase cost planning process originally developed by Ferry and Brandon, the text provides a thorough grounding in contemporary issues including procurement innovation, whole life cycle costing and modelling techniques. Designed to support the core cost planning studies covered by students reading for degrees in quantity surveying and construction management, it provides a platform for understanding the fundamental importance of effective cost planning practice. The principals of elemental cost planning are covered from both pre- and post- contract perspectives; the role of effective briefing and client/stakeholder engagement as best practice is also reinforced in this text. This new edition: Addresses The Soft Landings Framework (a new govt. initiative, especially for schools) to make buildings perform radically better and much more sustainably. Puts focus on actual performance in use at brief stage, during design and construction, and especially before and after handover. Covers recent changes in procurement, especially under the NEC and PFI Provides more on PPP and long-term maintenance issues Offers an improved companion website with tutorial worksheets for lecturers and Interactive spreadsheets for students, e.g. development appraisal models; lifecycle costing models
Download or read book Methodologies for Service Life Prediction of Buildings written by Ana Silva and published by Springer. This book was released on 2016-04-28 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting an analysis of different approaches for predicting the service life of buildings, this monograph discusses various statistical tools and mathematical models, some of which have rarely been applied to the field. It explores methods including deterministic, factorial, stochastic and computational models and applies these to façade claddings. The models allow (i) identification of patterns of degradation, (ii) estimation of service life, (iii) analysis of loss of performance using probability functions, and (iv) estimation of service life using a probability distribution. The final chapter discusses the differences between the different methodologies and their advantages and limitations. The authors also argue that a better understanding of the service life of buildings results in more efficient building maintenance and reduced environmental costs. It not only provides an invaluable resource to students, researchers and industry professionals interested in service life prediction and sustainable construction, but is also of interest to environmental and materials scientists.
Download or read book Durability of Building Materials and Components written by Vasco Peixoto de de Freitas and published by Springer Science & Business Media. This book was released on 2013-07-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability of Building Materials and Components provides a collection of recent research works to contribute to the systematization and dissemination of knowledge related to the long-term performance and durability of construction and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of durability, service life prediction methodologies, the durability approach for historical and old buildings, asset and maintenance management and on the durability of materials, systems and components. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.
Download or read book Concrete Structure Management Guide to Ownership and Good Practice written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction projects are undertaken to meet a variety of business, service and aspirational objectives and needs. The success of a building or an element of infrastructure depends on how well it meets the owner's needs and interests or those of the users. Recent changes in owner attitudes to construction are reflected in an increasing interest in through-life costs, i.e. not only the capital costs of construction but also the operational costs associated with a structure's functional performance for a defined life span. The owner can greatly improve the likelihood of achieving the value they seek from the facility by being intimately and effectively involved in the definition of performance requirements at the start of the construction procurement process. The objective of fib Bulletin 44 is to provide guidance to owners of concrete structures on: the management of their concrete structures (buildings and infrastructure) as part of their business goals or the service objectives of their organization; best practice in the management of concrete structures; their responsibilities with respect to the management of their concrete structures; the wider context and issues of service life design; information and direction needed by the supporting professional team of architects, engineers, specifiers, contractors and others. This Guide also provides background information on topics such as deterioration processes and technical procedures used for the management of concrete structures, including reference to international standards for the protection and repair of concrete structures. These activities are illustrated by application examples/case histories and by a section addressing frequently asked questions. A brief review is made of some potential future developments.
Download or read book Environmental Impact Assessment of Buildings written by Wahidul Biswas and published by MDPI. This book was released on 2020-02-05 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue covers a wide range of areas—including building orientation, service life, use of photocatalytically active structures and PV facades, implications of transportation system, building types (i.e., high rise, multilevel, commercial, residential), life cycle assessment, and structural engineering—that need to be considered in the environmental impact assessment of buildings, and the chapters include case studies across the globe. Consideration of these strategies would help reduce energy and material consumption, environmental emissions, and waste generation associated with all phases of a building’s life cycle. Chapter 1 demonstrates that green star concrete exhibits the same structural properties as conventional concrete in Australia. Chapter 2 showed that the use of TiO2 as a photocatalyst on the surface of construction materials with a suitable stable binding agent, such as aggregates, would enable building walls to absorb NOx from air. This study found that TiO2 has the potential to reduce ambient concentrations of NOx from areas where this pollutant becomes concentrated under solar irradiation. Chapter 3 presents the life cycle assessment of architecturally integrated glass–glass photovoltaics in building facades to find the appropriate material composition for a multicolored PV façade offering improved environmental performance. Chapter 4 shows that urban office buildings lacking appropriate orientation experienced indoor overheating. Chapter 5 details four modeling approaches that were implemented to estimate buildings’ response towards load shedding. Chapter 6 covers the life cycle GHG emissions of high-rise residential housing block to discover opportunities for environmental improvement. Chapter 7 discusses an LCA framework that took into account variation in the service life of buildings associated with the use of different types of materials. Chapter 8 presents a useful data mining algorithm to conduct life cycle asset management in residential developments built on transport systems.
Download or read book A life cycle approach to buildings written by Niklaus Kohler and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: A building's entire life cycle aooOCU1/4oOe1/4o from construction through occupation, cycles of renovation and repairs, up to demolition and disposal, impacts the flow of materials thereby created. The decisive path of a building's environmental impact is however usually set early in the planning phase, at a time when planners often still lack knowledge about the sustainability characteristics of different building materials and constructions."
Download or read book Urban Heat Stress and Mitigation Solutions written by Vincenzo Costanzo and published by Routledge. This book was released on 2021-09-08 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with an understanding of the impact that different morphologies, construction materials and green coverage solutions have on the urban microclimate, thus affecting the comfort conditions of urban inhabitants and the energy needs of buildings in urban areas. The book covers the latest approaches to energy and outdoor comfort measurement and modelling on an urban scale, and describes possible measures and strategies to mitigate the effects of the mutual interaction between urban settlements and local microclimate. Despite its relevance, only limited literature is currently devoted to appraising—from an engineering perspective—the intertwining relationships between urban geometry and fabrics, energy fluxes between buildings and their surroundings, outdoor microclimate conditions and building energy demands in urban areas. This book fills this gap by first discussing the physical processes that govern heat and mass transfer at an urban scale, while emphasizing the role played by different spatial arrangements, manmade materials and green infrastructures on the outdoor microclimate. The first chapters also address the implications of these factors on the outdoor comfort conditions experienced by pedestrians, and on the buildings’ energy demand for space heating and cooling. Then, based upon cutting-edge experimental activities and simulation work, this book demonstrates current and forthcoming adaptation and mitigation strategies to improve the urban microclimate and its impact on the built environment, such as cool materials, thermochromic and retroreflective finishing materials, and green infrastructures applied either at a building scale or at the urban scale. The effect of these solutions is demonstrated for different cities worldwide under a range of climate conditions. Finally, the book opens a wider perspective by introducing the basic elements that allow fuel poverty, raw materials consumption, and the principles of circular economy in the definition of a resilient urban settlement.
Download or read book Structural Concrete Volume 3 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.
Download or read book Structural Concrete Textbook Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2020-11-25 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Download or read book Green Building with Concrete written by Gajanan M. Sabnis and published by CRC Press. This book was released on 2015-06-16 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates the Global Relevance of SustainabilityApplicable to roads, bridges, and other elements of the infrastructure, Green Building with Concrete: Sustainable Design and Construction, Second Edition provides an overview of all available information on the role of concrete in green building. A handbook offering viewpoints from worldwide experts
Download or read book Buildings and Constructed Assets Service Life Planning written by International Organization for Standardization and published by . This book was released on 2004 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparing a Building Service Life Plan for Green Buildings written by Dru Meadows and published by McGraw Hill Professional. This book was released on 2014-05-22 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert guidance on developing a green building service life plan Filled with step-by-step instructions, Preparing a Building Service Life Plan for Green Buildings explains how to create a framework for managing the performance requirements and life-cycle impacts--including end-of-life--of major building elements for the duration of a green building’s intended lifespan. The book discusses operation and maintenance; inspections and assessments; repairs, upgrades, and replacements; documentation; and removal, reuse, recycling, dismantling, and end-of-life disposal of building components. A customizable template for creating a comprehensive green BSLP is included in this practical resource. Covers major building elements: Standard foundations Slab on grade Basement walls Floor construction Roof construction Exterior walls Exterior windows and doors Roof coverings Interior partitions and doors Fittings Stair construction Wall, floor, and ceiling finishes Elevators and lifts Plumbing, HVAC, and electrical Fire protection Pedestrian paving Site development--fences, retaining walls, fountains, and other site improvements Storm sewer
