Download or read book Building Regulations in Brief written by Ray Tricker and published by Taylor & Francis. This book was released on 2022-05-30 with total page 1163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tenth edition of the most popular and trusted guide reflects all the latest amendments to the Building Regulations, planning permission and the Approved Documents in England and Wales. This includes coverage of the recent changes to use classes, updated sections on planning permission, permitted development and application fees. We have included the revisions to Approved Document B (as a result of the Hackitt Review), as well as the latest changes to Approved Documents F and L, and the new documents O (overheating) and S (electric vehicle charging points), which come into effect in June 2022. Giving practical information throughout on how to work with (and within) the Regulations, this book enables compliance in the simplest and most cost-effective manner possible. The no-nonsense approach of Building Regulations in Brief cuts through any confusion and explains the meaning of the Regulations. Consequently, it has become a favourite for anyone working in or studying the building industry, as well as those planning to have work carried out on their home. It is essential reading for all building contractors and subcontractors, site engineers, building engineers, building control officers, building surveyors, architects, construction site managers and DIYers.

Download or read book Building Regulations Pocket Book written by Ray Tricker and published by Routledge. This book was released on 2018-02-06 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy guide provides you with all the information you need to comply with the UK Building Regulations and Approved Documents. On site, in the van, in the office, wherever you are, this is the book you’ll refer to time and time again to double check the regulations on your current job. The Building Regulations Pocket Book is the must have reliable and portable guide to compliance with the Building Regulations. Part 1 provides an overview of the Building Act Part 2 offers a handy guide to the dos and don’ts of gaining the Local Council’s approval for Planning Permission and Building Regulations Approval Part 3 presents an overview of the requirements of the Approved Documents associated with the Building Regulations Part 4 is an easy to read explanation of the essential requirements of the Building Regulations that any architect, builder or DIYer needs to know to keep their work safe and compliant on both domestic or non-domestic jobs This book is essential reading for all building contractors and sub-contractors, site engineers, building engineers, building control officers, building surveyors, architects, construction site managers and DIYers. Homeowners will also find it useful to understand what they are responsible for when they have work done on their home (ignorance of the regulations is no defence when it comes to compliance!).

Download or read book Residential Construction Law written by Philip Britton and published by Bloomsbury Publishing. This book was released on 2021-07-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to offer a systematic and analytical overview of the legal framework for residential construction. In doing so, the book addresses two fundamental questions: Prevention: What assurances can the law give buyers (and later owners and occupiers) of homes that construction work – from building of a complete home to adding an extension or replacing a shower unit – will comply with minimum standards of design, safety and build quality? Cure: What forms of redress - from whom, and by what route - can residents expect, when, often long after completion of construction, they discover defects? The resulting problems pose some big and difficult questions of principle and policy about standards, rights and remedies, which in turn concern justice more generally. This book addresses these key issues in a comparative context across the United Kingdom, Ireland, Australia and New Zealand. It is an accessible guide to the existing law for residents and construction professionals (and their legal advisers), but also charts a course to further, meaningful reforms of the legal landscape for residential construction around the world. The book's two co-authors, Philip Britton and Matthew Bell, have taught in the field in the UK, Australia and New Zealand; both have been active in legal practice, as have the book's two specialist contributors, Deirdre Ní Fhloinn and Kim Vernau.

Download or read book Domestic Building Services Compliance Guide for Part L 2013 Edition written by Dclg and published by Riba Publications Limited. This book was released on 2014-03 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide is referred to in the 2013 edition of Approved Document L1A and the 2010 edition of Approved Document L1B (as amended in 2013) for dwellings as a source of guidance on complying with Building Regulations requirements for space heating and hot water systems, mechanical ventilation, comfort cooling, fixed internal and external lighting and renewable energy systems.

Download or read book ICSDEC 2012 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Access Manual written by Ann Sawyer and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual covers the design, improvement, maintenance and management of accessible environments. It shows you how to provide and run buildings, services, and employment facilities to enable independent and convenient use by everyone. The Access Manual was first published in November 2003 and has been used by architects and facilities managers needing to meet the requirements of new legislation in 2004. It was well received by design, management, access, and health professionals. This is a fast-moving area and there are now several additional pieces of legislation and guidance central to inclusive design and making buildings accessible to all. This 3rd edition follows the same structure and approach and updates three main areas: The Equality Act 2010 Building Regulations: Approved Documents to Parts M (2013) and K (2013) British Standards: amendment and updating of BS8300 The authors have also updated the material on access auditing, providing additional examples and sample access audit reports and access statements. With its comprehensive information on standards, legislation and good practice, The Access Manual: designing, auditing and managing inclusive built environments, 3rd edition ensures you can: be fully aware of the issues involved in accessibility and inclusive design understand your legal obligations and the guidance available commission access audits create and manage an access improvement programme maintain accessibility in buildings and working practices understand access issues in the design of new buildings

Download or read book Guide to Building Control written by Anthony Gwynne and published by John Wiley & Sons. This book was released on 2013-02-25 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: To clarify the practical requirements of the Building Regs and help you meet their requirements first go, all the information contained in the building regulations 2010 and approved documents is presented here in an easy-to-understand format, clear, concise and fully illustrated. Guidance is given for domestic buildings of up to three storeys in England and Wales, including extensions, loft conversions, new dwellings, conversions (garages, basements and barns), and upgrading of existing buildings - including the use of natural lime mortars, plasters renders and paints. There are clear explanations of how the technical design and construction requirements of the Building Regs can be met with sufficient information to draw up an effective specification and design to be developed. Guide to Building Control illustrates the design and construction of the various building elements and explains the principles and processes of the building regulations and approved documents - including structure, fire safety, contaminates, sound insulation, ventilation, water efficiency, drainage systems, combustion appliances, stairs and guarding, energy conservation/green building issues, disabled access, safety glazing, electrical safety, materials and workmanship. The Guide contains up-to-date examples of everyday practices and procedures gained by the author - a practicing building control surveyor - from years of responding to requests from property professionals, builders, property owners and students for clarification of the practical requirements of the building regulations. Accompanied by detailed diagrams, tables and text offering an enlightened understanding of the complexities of building regulations the Guide is both an authoritative reference for use at planning stage and a practical handbook on site. Students and professionals will find it an essential, easy-to-use resource for building control surveyors, building designers, building contractors, self-build, and others working in the construction industry.

Download or read book Wiring Regulations in Brief written by Ray Tricker and published by Routledge. This book was released on 2020-11-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly updated edition of Wiring Regulations in Brief provides a user-friendly guide to the newest amendments to BS 7671 and the IET Wiring Regulations. Topic-based chapters link areas of working practice – such as earthing, cables, installations, testing and inspection, and special locations – with the specifics of the Regulations themselves. This allows quick and easy identification of the official requirements relating to the situation in front of you. The requirements of the regulations, and of related standards, are presented in an informal, easy-to-read style to remove confusion. Packed with useful hints and tips, and highlighting the most important or mandatory requirements, this book is a concise reference on all aspects of the eighteenth edition of the IET Wiring Regulations. This handy guide provides an on-the-job reference source for electricians, designers, service engineers, inspectors, builders, and students.

Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2018-11-05 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative, well-established, comprehensive, practical, and highly illustrated guide to construction practice Based mainly on domestic and residential buildings—and filled with extensive illustrations throughout—this concise text is the ideal introduction to the subject of building construction. It provides the basic material that readers need in order to understand the construction process for the majority of low rise buildings. The book explains construction technology through the key functional and performance requirements for the main elements common to all buildings. With a strong focus on building efficiency and meeting the challenges posed by limiting the environmental impact of buildings, and new “at a glance” summaries allowing you to grasp the salient points of each chapter, readers will find the text fully up to date with the latest building regulations and construction technology. Barry’s Introduction to Construction of Buildings, Fourth Edition starts by taking an in-depth look at the construction process and general principles of construction. It then offers comprehensive chapter coverage of site analysis, set-up, drainage and scaffolding; ground stability and foundations; floors, walls, doors, windows, roofs, stairs, and ramps; surface finishes; internal environment and energy supply; and water supply and sanitation. Deals with design, technology, site assembly, and environmental issues of domestic and residential buildings Thoroughly updated, with particular attention paid to the concept of building efficiency and improved integration of the topics covered to match current student needs New “at a glance” summaries at the beginning of each chapter A companion to Barry's Advanced Construction of Buildings, Fourth Edition Barry’s Introduction to Construction of Buildings is an excellent source of information for undergraduate students and those working towards similar NQF level 5 and 6 qualifications in building and construction.

Download or read book Managing and Working with Asbestos written by and published by . This book was released on 2013 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the Control of Asbestos Regulations 2012, with the various sections of the Health and Safety Executive's Approved code of practice (ACOP) and associated guidance notes inserted at the relevant points.

Download or read book Structural Design of Buildings written by Feng Fu and published by Emerald Group Publishing. This book was released on 2024-07-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design of Buildings: Holistic Design is the essential reference for structural engineers involved in the design of buildings and other structures. It forms part of the Structural Design of Buildings series and introduces the concepts and principles involved in holistic structural design of a building.

Download or read book The Architect in Practice written by David Chappell and published by John Wiley & Sons. This book was released on 2016-01-26 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout its many editions, The Architect in Practice has remained a leading textbook used in the education of architects. While the content of the book has developed, the message and philosophy has remained constant: to provide students of architecture and young practitioners with a readable guide to the profession, outlining an architect's duties to their client and contractor, the key aspects of running a building contract, and the essentials of management, finance and drawing office procedure. The eleventh edition follows in that tradition. The text has been brought up to date to ensure it follows the new RIBA Plan of Work 2013 as the guide to the architect’s workflow. In addition, a number of changes to standard forms of contract were made with the publication of the JCT 2011 suite of contracts, and the RIBA Standard Form for the Appointment of an Architect 2010 (2012 Revision). These new forms are fully covered. In addition, the opportunity has been taken to reorganise the layout so that the content flows in a way that is more consistent with current architectural practice, and to deal with the increasing use of BIM. The eleventh edition of The Architect in Practice continues to provide the guidance and advice all students and practising architects need in the course of their studies and in their profession.

Download or read book Health and Safety Premises and Environment Handbook 2012 written by Workplace Law Group and published by Kogan Page Publishers. This book was released on 2011-12-03 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Health and Safety, Premises and Environment Handbook 2012 provides you with all the essential information you need on legislation, regulation, policy, case law and best practice. Information is presented in plain English, and broken down into separate A-Z sections containing legislative summaries, key points, handy fact boxes and sources of further information. All the guidance is written and compiled by our team of expert authors, including top law firms, surveyors, safety consultants and regulatory bodies. Workplace Law's Health and Safety, Premises and Environment Handbook is aimed at all those with an interest in the health and safety, premises and environmental management aspects of the workplace, and so our readership consists mainly of Health and Safety managers, officers and directors, Facilities Managers, as well as General Managers and Directors of small businesses.

Download or read book Modern Methods of Construction and Innovative Materials written by Arthur Lyons and published by Taylor & Francis. This book was released on 2024-04-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook has two main themes. The first is Modern Methods of Construction (MMC) which is the off-site manufacture of a wide spectrum of products, ranging from whole buildings to be transported onto site, down to smaller units or components for site integration. The second theme describes the innovation and progress towards carbon zero by the major generators of CO2 in the construction industry – namely cement, steel and masonry. The first section of the book describes and illustrates with photographs, the major forms of Modern Methods of Construction. These include fully completed 3D units, panelised systems, pods, sub-assemblies and on-site MMC. The section on Innovative Materials then describes a wide range of construction products which are entering into the built environment sector. Some new entrants are variants on well-established construction materials such as steel and concrete. Materials such as these will remain major construction materials for the foreseeable future, but their composition and manufacturing processes will inevitably have to change. Timber also will remain a major construction material, but sustainable sourcing is key and its utilisation as cross-lamination timber (CLT) or as modified timber is rapidly developing. As a result, students and practitioners must familiarise themselves with these materials, their composition, and various uses. The book goes on to describe variants of other traditional building products, such as glass, plastic and insulation, which are undergoing major developments leading towards enhanced environmental sustainability, as well as many emergent materials, some of which are likely to be significant in future. Modern Methods of Construction and Innovative Materials is the only book combining these important elements of the future of the industry in an easy-to-read guide for students and new practitioners. It is essential reading for anyone studying and working in the built environment, be they architects, construction managers, surveyors or engineers.

Download or read book Building Materials Health and Indoor Air Quality written by Tom Woolley and published by Taylor & Francis. This book was released on 2016-10-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of building materials and construction methods on the health and wellbeing of occupants is often underestimated. This book is an essential guide to understanding and avoiding hazardous materials and poor air quality in buildings. The author covers a range of issues beginning with an explanation of how buildings work and how this influences the health of occupants and users. The text covers: Ventilation, air conditioning and indoor air quality Damp and mould Asthma and respiratory problems Cancer and endocrine disorders Radiation and radon Hazardous building materials used in construction Indoor air quality and emissions Ecological alternatives and approaches and remedies for ‘sick’ buildings The book also guides the reader through the confusing world of regulations, EU and international guidelines and certifications, and provides a critical analysis of different theories of healthy buildings and philosophies. Written in a clear and accessible style, this book provides indispensable advice and information to anyone wishing to better understand healthy buildings and materials. It is essential reading for architects, surveyors, public health professionals, facilities managers and environmentalists.

Download or read book Construction Quantity Surveying written by Donald Towey and published by John Wiley & Sons. This book was released on 2017-09-07 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised and updated comprehensive resource for Quantity Surveyors working with a construction contractor The second edition of Construction Quantity Surveying offers a practical guide to quantity surveying from a main contractor's perspective. This indispensable resource covers measurement methodology (including samples using NRM2 as a guide), highlights the complex aspects of a contractor's business, reviews the commercial and contractual management of a construction project and provides detailed and practical information on running a project from commencement through to completion. Today’s Quantity Surveyor (QS) plays an essential role in the management of construction projects, although the exact nature of the role depends on who employs the QS. The QS engaged by the client and the contractor's QS have different parts to play in any construction project, with the contractor's QS role extending beyond traditional measurement activities, to encompass day-to-day tasks of commercial building activities including estimating, contract administration, and construction planning, as well as cost and project management. This updated and practical guide: Focuses on the application, knowledge and training required of a modern Quantity Surveyor Clearly shows how Quantity Surveying plays an essential central role within the overall management of construction projects Covers measurement methodology, the key elements of the contractor's business and the commercial and contractual management of a construction project The construction industry changes at fast pace meaning the quantity surveyor has a key role to play in the successful execution of construction projects by providing essential commercial input. Construction Quantity Surveying meets this demand as an up-to-date practical guide that includes the information needed for a Quantity Surveyor to perform at the highest level. It clearly demonstrates that quantity surveying is not limited to quantifying trade works and shows it as an important aspect of commercial and project management of construction projects.

Download or read book Fire Safety in Residential Property written by Richard Lord and published by Routledge. This book was released on 2021-03-30 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to take the reader through all aspects of fire safety and management in residential settings, from origin and ignition, risk assessment, protection and prevention, as well as comparing effective enforcement options from across all parts of the UK. It outlines the basis of law, standards and guidance relating to fire safety and building performance, and critically evaluates the legal provisions and approaches to risk reduction with the focus on rented properties. This book: Provides wider access to fire safety knowledge previously generally used by regulators and specialists. Examines fire risk assessments in domestic premises and the competency of assessors. Explains the approaches to fire safety enforcement the impact of property licensing. Includes fire risk precautions for housing and general checklists to help landlords and tenants understand their responsibilities Explores the effect of existing legislation with references to key Property Tribunal decisions relating to fire risk management and future legal developments. This book will assist Environmental Health Officers and Environmental Health Practitioners – as well as graduating academics of the field – in their work to encourage the appropriate and effective use of legislation. Landlords, Estate managers, student accommodation managers, surveyors and tenant groups may also find this book of interest.