Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 1 Direct Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-14 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, BUILDING MANUAL in English and German that will provided you every information needed in order to easily build and get it running a 3D printer with the following specifications:-CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 0 Indirect Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-15 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: -

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Direct Extrusion written by Dr Ing Dan-Andrei Marinescu and published by Independently Published. This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Indirect Extrusion written by Dr Ing Dan Marinescu and published by . This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Double Extrusion written by Dr Ing Dan Marinescu and published by Independently Published. This book was released on 2019-01-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer written by Marinescu and published by Independently Published. This book was released on 2019-08-08 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EASY CoreXY M350 is a medium size 3D Printer born from the desire of making something simple to build, where only basic tools are needed but in the same time the expectation of the RepRap Makers are fully met: printing precision, rigid structure, safety, bed leveling, configurability and multi-filament printing.The 'corexy'-architecture is a very practically and cost effective solution for cartesian 3d printers and that is the reason why I've preferred this concept. The model 'M350' earned his name from the fact that all the aluminum profiles from the frame are exactly 350mm long - this simplifies already from beginning a lot of aspects concerning the building of the frame.The Book is a building manual which describes a strait forward process with easy to follow steps. There are no stories about 3d printing, the focus is set up on printing the necessary components, mechanical construction, electrical harness, wiring diagram and firmware. Everything is described using pictures from 3d and from reality, the text is in simple plain English.There were used as much as possible standard components for RepRap 3d printers - this gives the complete freedom when it comes on deciding from where to purchase the needed components. The number and dimension of the 3d-printed elements were kept at minimum in order to optimize the time and cost of printing process

Download or read book 3D Printing For Dummies written by Richard Horne and published by John Wiley & Sons. This book was released on 2017-05-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling book on 3D printing 3D printing is one of the coolest inventions we've seen in our lifetime, and now you can join the ranks of businesspeople, entrepreneurs, and hobbyists who use it to do everything from printing foods and candles to replacement parts for older technologies—and tons of mind-blowing stuff in between! With 3D Printing For Dummies at the helm, you'll find all the fast and easy-to-follow guidance you need to grasp the methods available to create 3D printable objects using software, 3D scanners, and even photographs through open source software applications like 123D Catch. Thanks to the growing availability of 3D printers, this remarkable technology is coming to the masses, and there's no time like the present to let your imagination run wild and actually create whatever you dream up—quickly and inexpensively. When it comes to 3D printing, the sky's the limit! Covers each type of 3D printing technology available today: stereolithology, selective sintering, used deposition, and granular binding Provides information on the potential for the transformation of production and manufacturing, reuse and recycling, intellectual property design controls, and the commoditization of products Walks you through the process of creating a RepRap printer using open source designs, software, and hardware Offers strategies for improved success in 3D printing On your marks, get set, innovate!

Download or read book ProBlogger written by Darren Rowse and published by John Wiley & Sons. This book was released on 2010-04-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete how-to from two of the world’s top bloggers Thousands of aspiring bloggers launch new blogs every day, hoping to boost their income. Without solid advice from experts, most will fail. This bestselling guide, now fully revised with new and updated tips and tricks from two of the world’s most successful bloggers, provides the step-by-step information bloggers need to turn their hobby into an income source or a fulltime career. Earning a solid income from blogging is possible, but tricky; this book details proven techniques and gives aspiring bloggers the tools to succeed Even novices will learn to choose a blog topic, analyze the market, set up a blog, promote it, and earn revenue Offers solid, step-by-step instruction on how bloggers make money, why niches matter, how to use essential blogging tools and take advantage of social media and content aggregators, what a successful blog post should include, how to optimize advertising, and much more Written by two fulltime professional bloggers, the updated edition of ProBlogger tells you exactly how to launch and maintain a blog that makes money.

Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.

Download or read book Maintaining and Troubleshooting Your 3D Printer written by Charles Bell and published by Apress. This book was released on 2014-09-17 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining and Troubleshooting Your 3D Printer by Charles Bell is your guide to keeping your 3D printer running through preventive maintenance, repair, and diagnosing and solving problems in 3D printing. If you’ve bought or built a 3D printer such as a MakerBot only to be confounded by jagged edges, corner lift, top layers that aren’t solid, or any of a myriad of other problems that plague 3D printer enthusiasts, then here is the book to help you get past all that and recapture the joy of creative fabrication. The book also includes valuable tips for builders and those who want to modify their printers to get the most out of their investment. Good fabrication begins with calibration. Aligning the print bed to support deposition of medium in three dimensions is critical. Even off-the-shelf machines that are pre-built must be aligned and periodically realigned throughout their life cycle. Maintaining and Troubleshooting Your 3D Printer helps you achieve and hold proper alignment. Maintaining and Troubleshooting Your 3D Printer also helps with software and hardware troubleshooting. You’ll learn to diagnose and solve firmware calibration problems, filament and feed problems, chassis issues, and more. Finally there are regular maintenance and enhancements. You’ve invested significantly in your 3D printer. Protect that investment using the guidance in this book. Learn to clean and lubricate your printer, to maintain the chassis, and know when realignment of the print bed is needed. Learn ways to master your craft and improve the quality of your prints through such things as post-print finishing and filament management. Don’t let the challenges of 3D printing stand in the way of creativity. Maintaining and Troubleshooting Your 3D Printer by Charles Bell helps you conquer the challenges and get the most benefit from your expensive investment in personal fabrication.

Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2020-05-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient.This book is for new 3D printer owners, makers of all kinds, entrepreneurs, technology educators, and anyone curious about what you can do with a 3D printer. In this revised and expanded new edition of Mastering 3D Printing, which has been a trusted resource through five years of evolution in the 3D printing industry, you’ll gain a comprehensive understanding of 3D printing. This book presumes no foreknowledge and describes what you need to know about how printers work, how to decide which type of printer (filament, resin, or powder) makes the most sense for you, and then how to go forward in the case of filament and resin printers. This new edition now includes material about consumer resin printing, the evolution of lower-cost metal printing, and the plethora of both materials and applications. What You’ll LearnChoose among the different 3D printing technologiesCreate or find 3D models to printMake both easy and challenging prints come out as you imaginedAssess whether your business, factory, home or classroom will benefit from 3D printingWork with applications that are good candidates for first projects in home and industrial applications Who This Book Is For People who are encountering 3D printing for the first time, or for those who want to level up their skills. It is designed for the nontechnical adult and minimizes jargon. However more sophisticated users will still find tips and insights of value.

Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2014-09-18 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering 3D Printing shows you how to get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient. You've printed key chains. You've printed simple toys. Now you're ready to innovate with your 3D printer to start a business or teach and inspire others. Joan Horvath has been an educator, engineer, author, and startup 3D printing company team member. She shows you all of the technical details you need to know to go beyond simple model printing to make your 3D printer work for you as a prototyping device, a teaching tool, or a business machine.

Download or read book Silent Printers written by Dennis E. Rhodes and published by University of Toronto Press. This book was released on 1995 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: PC-Aided Numerical Heat Transfer and Convective Flow is intended as a graduate course textbook for Mechanical and Chemical Engineering students as well as a reference book for practitioners interested in analytical and numerical treatments in the subject. The book is written so that the reader can use the enclosed diskette, with the aid of a personal computer, to systematically learn both analytical and numerical approaches associated with fluid flow and heat transfer without resorting to complex mathematical treatments. This is the first book that not only describes solution methodologies but also provides complete programs ranging from SOLODE to SAINTS for integration of Navier-Stokes equation. The book covers boundary layer flows to fully elliptic flows, laminar flows to turbulent flows, and free convection to forced convection. The student will learn about convection in porous media, a new field of rapid growth in contemporary heat transfer research. A basic knowledge of fluid mechanics and heat transfer is assumed. It is also assumed that the student knows the basics of Fortran and has access to a personal computer.The material can be presented in a one-semester course or with selective coverage in a seminar.

Download or read book Reusability of Facemasks During an Influenza Pandemic written by Institute of Medicine and published by National Academies Press. This book was released on 2006-08-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any strategy to cope with an influenza pandemic must be based on the knowledge and tools that are available at the time an epidemic may occur. In the near term, when we lack an adequate supply of vaccine and antiviral medication, strategies that rely on social distancing and physical barriers will be relatively more prominent as means to prevent spread of disease. The use of respirators and facemasks is one key part of a larger strategy to establish barriers and increase distance between infected and uninfected individuals. Respirators and facemasks may have a role in both clinical care and community settings. Reusability of Facemasks During an Influenza Pandemic: Facing the Flu answers a specific question about the role of respirators and facemasks to reduce the spread of flu: Can respirators and facemasks that are designed to be disposable be reused safely and effectively? The committee-assisted by outstanding staff-worked intensively to review the pertinent literature; consult with manufacturers, researchers, and medical specialists; and apply their expert judgment. This report offers findings and recommendations based on the evidence, pointing to actions that are appropriate now and to lines of research that can better inform future decisions.

Download or read book Personal Fabrication written by Patrick Baudisch and published by . This book was released on 2017-05-08 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: While fabrication technologies have been in use in industry for several decades, expiring patents have recently allowed the technology to spill over to technology-enthusiastic "makers." Personal Fabrication looks at the massive, disruptive changes that are likely to be seen in interactive computing, as well as to computing as a whole. It discusses six main challenges that need to be addressed for this change to take place, and explains researchers in HCI will play a key role in tackling these challenges.

Download or read book Electromagnetics written by Edward J. Rothwell and published by CRC Press. This book was released on 2018-10-03 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an ideal transition from introductory to advanced concepts, Electromagnetics, Second Edition builds a foundation that allows electrical engineers to confidently proceed with the development of advanced EM studies, research, and applications. This second edition of a popular text continues to offer coverage that spans the entire field, from electrostatics to the integral solutions of Maxwell’s equations. The book provides a firm grounding in the fundamental concepts of electromagnetics and bolsters understanding through the use of classic examples in shielding, transmission lines, waveguides, propagation through various media, radiation, antennas, and scattering. Mathematical appendices present helpful background information in the areas of Fourier transforms, dyadics, and boundary value problems. The second edition adds a new and extensive chapter on integral equation methods with applications to guided waves, antennas, and scattering. Utilizing the engaging style that made the first edition so appealing, this second edition continues to emphasize the most enduring and research-critical electromagnetic principles.

Download or read book More Than Meets the Eye written by Georgina Kleege and published by Oxford University Press. This book was released on 2018 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: More Than Meets the Eye seeks to dismantle traditional understandings of blindness through scrutiny of philosophical speculation, scientific case studies, literary depictions, and museum access programs for the blind. It introduces blind and visually impaired artists whose work has shattered stereotypes and opened up new aesthetic possibilities for everyone.