Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 0 Indirect Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-15 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: -

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 1 Direct Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-14 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, BUILDING MANUAL in English and German that will provided you every information needed in order to easily build and get it running a 3D printer with the following specifications:-CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Indirect Extrusion written by Dr Ing Dan Marinescu and published by . This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Direct Extrusion written by Dr Ing Dan-Andrei Marinescu and published by Independently Published. This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Double Extrusion written by Dr Ing Dan Marinescu and published by Independently Published. This book was released on 2019-01-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer written by Marinescu and published by Independently Published. This book was released on 2019-08-08 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EASY CoreXY M350 is a medium size 3D Printer born from the desire of making something simple to build, where only basic tools are needed but in the same time the expectation of the RepRap Makers are fully met: printing precision, rigid structure, safety, bed leveling, configurability and multi-filament printing.The 'corexy'-architecture is a very practically and cost effective solution for cartesian 3d printers and that is the reason why I've preferred this concept. The model 'M350' earned his name from the fact that all the aluminum profiles from the frame are exactly 350mm long - this simplifies already from beginning a lot of aspects concerning the building of the frame.The Book is a building manual which describes a strait forward process with easy to follow steps. There are no stories about 3d printing, the focus is set up on printing the necessary components, mechanical construction, electrical harness, wiring diagram and firmware. Everything is described using pictures from 3d and from reality, the text is in simple plain English.There were used as much as possible standard components for RepRap 3d printers - this gives the complete freedom when it comes on deciding from where to purchase the needed components. The number and dimension of the 3d-printed elements were kept at minimum in order to optimize the time and cost of printing process

Download or read book Reusability of Facemasks During an Influenza Pandemic written by Institute of Medicine and published by National Academies Press. This book was released on 2006-08-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any strategy to cope with an influenza pandemic must be based on the knowledge and tools that are available at the time an epidemic may occur. In the near term, when we lack an adequate supply of vaccine and antiviral medication, strategies that rely on social distancing and physical barriers will be relatively more prominent as means to prevent spread of disease. The use of respirators and facemasks is one key part of a larger strategy to establish barriers and increase distance between infected and uninfected individuals. Respirators and facemasks may have a role in both clinical care and community settings. Reusability of Facemasks During an Influenza Pandemic: Facing the Flu answers a specific question about the role of respirators and facemasks to reduce the spread of flu: Can respirators and facemasks that are designed to be disposable be reused safely and effectively? The committee-assisted by outstanding staff-worked intensively to review the pertinent literature; consult with manufacturers, researchers, and medical specialists; and apply their expert judgment. This report offers findings and recommendations based on the evidence, pointing to actions that are appropriate now and to lines of research that can better inform future decisions.

Download or read book Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management written by Lyes Benyoucef and published by Springer Science & Business Media. This book was released on 2010-05-10 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management addresses prominent concepts and applications of AI technologies in the management of networked manufacturing enterprises. The aim of this book is to align latest practices, innovation and case studies with academic frameworks and theories, where AI techniques are used efficiently for networked manufacturing enterprises. More specifically, it includes the latest research results and projects at different levels addressing quick-response system, theoretical performance analysis, performance and capability demonstration. The role of emerging AI technologies in the modelling, evaluation and optimisation of networked enterprises’ activities at different decision levels is also covered. Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management is a valuable guide for postgraduates and researchers in industrial engineering, computer science, automation and operations research.

Download or read book August Wilson written by Alan Nadel and published by University of Iowa Press. This book was released on 2010-05-16 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributors to this collection of 15 essays are academics in English, theater, and African American studies. They focus on the second half of Wilson's century cycle of plays, examining each play within the larger context of the cycle and highlighting themes within and across particular plays. Some topics discussed include business in the street in Jitney and Gem of the Ocean, contesting black male responsibilities in Jitney, the holyistic blues of Seven Guitars, violence as history lesson in Seven Guitars and King Hedley II, and ritual death and Wilson's female Christ. The book offers an index of plays, critics, and theorists, but not a subject index. Nadel is chair of American literature and culture at the University of Kentucky.

Download or read book Advanced Manufacturing Technology for Medical Applications written by Ian Gibson and published by John Wiley & Sons. This book was released on 2006-06-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced manufacturing technologies (AMTs) combine novel manufacturing techniques and machines with the application of information technology, microelectronics and new organizational practices within the manufacturing sector. They include "hard" technologies such as rapid prototyping, and "soft" technologies such as scanned point cloud data manipulation. AMTs contribute significantly to medical and biomedical engineering. The number of applications is rapidly increasing, with many important new products now under development. Advanced Manufacturing Technology for Medical Applications outlines the state of the art in advanced manufacturing technology and points to the future development of this exciting field. Early chapters look at actual medical applications already employing AMT, and progress to how reverse engineering allows users to create system solutions to medical problems. The authors also investigate how hard and soft systems are used to create these solutions ready for building. Applications follow where models are created using a variety of different techniques to suit different medical problems One of the first texts to be dedicated to the use of rapid prototyping, reverse engineering and associated software for medical applications Ties together the two distinct disciplines of engineering and medicine Features contributions from experts who are recognised pioneers in the use of these technologies for medical applications Includes work carried out in both a research and a commercial capacity, with representatives from 3 companies that are established as world leaders in the field – Medical Modelling, Materialise, & Anatomics Covers a comprehensive range of medical applications, from dentistry and surgery to neurosurgery and prosthetic design Medical practitioners interested in implementing new advanced methods will find Advanced Manufacturing Technology for Medical Applications invaluable as will engineers developing applications for the medical industry. Academics and researchers also now have a vital resource at their disposal.

Download or read book Research in Mass Customization and Personalization written by Mitchell and published by World Scientific. This book was released on 2009-12-01 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: A growing heterogeneity of demand, the advent of ';long tail markets';, exploding product complexities, and the rise of creative consumers are challenging companies in all industries to find new strategies to address these trends. Mass customization (MC) has emerged in the last decade as the premier strategy for companies in all branches of industry to profit from heterogeneity of demand and a broad scope of other customer demands.The research and practical experience collected in this book presents the latest thinking on how to make mass customization work. More than 50 authors from academia and management debate on what is viable now, what did not work in the past, and what lurks just below the radar in mass customization, personalization, and related fields.Edited by two leading authorities in the field of mass customization, both volumes of the book discuss, among many other themes, the latest research and insights on customization strategies, product design for mass customization, virtual models, co-design toolkits, customization value measurement, open source architecture, customization communities, and MC supply chains. Through a number of detailed case studies, prominent examples of mass customization are explained and evaluated in larger context and perspective.

Download or read book Systematic Cause Analysis Technique SCAT written by International Loss Control Institute, Incorporated and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rapid Casting Solutions written by Rupinder Singh and published by Trans Tech Publications Ltd. This book was released on 2011-10-27 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only.

Download or read book Robotic Intelligence written by Sheu Phillip Chen-yu and published by World Scientific. This book was released on 2019-03-06 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to provide a reference to the development of robotic intelligence, built upon Semantic Computing, in terms of 'action' to realize the 'context' and 'intention' formulated by Semantics Computing during the 'thinking' or reasoning process. It addresses three core areas:

Download or read book Digital Design and Fabrication written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Aided Tissue Engineering written by Alberto Rainer and published by Humana. This book was released on 2020-07-19 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details protocols encompassing different aspects of computer aided design and manufacturing of 3D scaffolds and biofabricated constructs for tissue engineering applications. Chapters are divided into four parts covering optimization of scaffold architectures for computer aided tissue engineering, synthetic routes to biomaterials compatible, technological platforms and manufacturing processes, and relevant applicative scenarios. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Authoritative and cutting-edge, Computer-Aided Tissue Engineering: Methods and Protocols aims to be useful for new and experienced laboratory researchers working on different aspects of corneal regeneration.