Download or read book Structural Condition Assessment written by Robert T. Ratay and published by John Wiley & Sons. This book was released on 2005-01-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Structural Condition Assessment, editor-in-chief Robert T. Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition assessment for strength, serviceability, restoration, adaptive reuse, code compliance, and vulnerability. Organized by the four main stages of a structural evaluation, this book provides an introduction to structural deterioration and its consequences, the business and legal aspects of conducting an evaluation, initial survey and evaluation techniques for various structures, and specific tests for five of the most common structural materials (concrete, steel, masonry, timber and fabric.)

Download or read book Finite Element Analysis for Building Assessment written by Paulo B. Lourenço and published by Taylor & Francis. This book was released on 2022-05-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing structures represent a heterogeneous category in the global built environment as often characterized by the presence of archaic materials, damage and disconnections, uncommon construction techniques and subsequent interventions throughout the building history. In this scenario, the common linear elastic analysis approach adopted for new buildings is incapable of an accurate estimation of structural capacity, leading to overconservative results, invasive structural strengthening, added intervention costs, excessive interference to building users and possible losses in terms of aesthetics or heritage values. For a rational and sustainable use of the resources, this book deals with advanced numerical simulations, adopting a practical approach to introduce the fundamentals of Finite Element Method, nonlinear solution procedures and constitutive material models. Recommended material properties for masonry, timber, reinforced concrete, iron and steel are discussed according to experimental evidence, building standards and codes of practice. The examples examined throughout the book and in the conclusive chapter support the analyst’s decision-making process toward a safe and efficient use of finite element analysis. Written primarily for practicing engineers, the book is of value to students in engineering and technical architecture with solid knowledge in the field of continuum mechanics and structural design.

Download or read book Finite Element Analysis for Building Assessment written by Paulo B. Lourenço and published by Taylor & Francis. This book was released on 2022-05-23 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing structures represent a heterogeneous category in the global built environment as often characterized by the presence of archaic materials, damage and disconnections, uncommon construction techniques and subsequent interventions throughout the building history. In this scenario, the common linear elastic analysis approach adopted for new buildings is incapable of an accurate estimation of structural capacity, leading to overconservative results, invasive structural strengthening, added intervention costs, excessive interference to building users and possible losses in terms of aesthetics or heritage values. For a rational and sustainable use of the resources, this book deals with advanced numerical simulations, adopting a practical approach to introduce the fundamentals of Finite Element Method, nonlinear solution procedures and constitutive material models. Recommended material properties for masonry, timber, reinforced concrete, iron and steel are discussed according to experimental evidence, building standards and codes of practice. The examples examined throughout the book and in the conclusive chapter support the analyst’s decision-making process toward a safe and efficient use of finite element analysis. Written primarily for practicing engineers, the book is of value to students in engineering and technical architecture with solid knowledge in the field of continuum mechanics and structural design.

Download or read book Whole Building Life Cycle Assessment written by Wblca Guide Special Project Working Group and published by . This book was released on 2018-08-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report serves as a guide for the project team to define and model the structural system within the reference building design as required by green building standards and rating systems.

Download or read book Life Cycle Assessment on Green Building Implementation written by Vivian W. Y. Tam and published by MDPI. This book was released on 2018-09-27 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Life Cycle Assessment on Green Building Implementation" that was published in Sustainability

Download or read book Resource and Climate Footprint Assessment of Constructions from Conventional Approach to Building Information Modelling written by Husam Sameer Abdulqader Al-Baghdadi and published by BoD – Books on Demand. This book was released on 2021-01-01 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this research, the tendency of material footprint assessment within sustainability assessment schemes for buildings is studied. Needs for quantifying material footprint within life cycle assessment (LCA) boundaries of buildings are identified. A methodology of assessing material footprint in relation to climate footprint is developed, using available life cycle databases for construction materials.

Download or read book Life cycle Assessment in Building and Construction written by Shpresa Kotaji and published by SETAC. This book was released on 2003 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Impact Assessment of Buildings written by Wahidul Biswas and published by MDPI. This book was released on 2020-02-05 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue covers a wide range of areas—including building orientation, service life, use of photocatalytically active structures and PV facades, implications of transportation system, building types (i.e., high rise, multilevel, commercial, residential), life cycle assessment, and structural engineering—that need to be considered in the environmental impact assessment of buildings, and the chapters include case studies across the globe. Consideration of these strategies would help reduce energy and material consumption, environmental emissions, and waste generation associated with all phases of a building’s life cycle. Chapter 1 demonstrates that green star concrete exhibits the same structural properties as conventional concrete in Australia. Chapter 2 showed that the use of TiO2 as a photocatalyst on the surface of construction materials with a suitable stable binding agent, such as aggregates, would enable building walls to absorb NOx from air. This study found that TiO2 has the potential to reduce ambient concentrations of NOx from areas where this pollutant becomes concentrated under solar irradiation. Chapter 3 presents the life cycle assessment of architecturally integrated glass–glass photovoltaics in building facades to find the appropriate material composition for a multicolored PV façade offering improved environmental performance. Chapter 4 shows that urban office buildings lacking appropriate orientation experienced indoor overheating. Chapter 5 details four modeling approaches that were implemented to estimate buildings’ response towards load shedding. Chapter 6 covers the life cycle GHG emissions of high-rise residential housing block to discover opportunities for environmental improvement. Chapter 7 discusses an LCA framework that took into account variation in the service life of buildings associated with the use of different types of materials. Chapter 8 presents a useful data mining algorithm to conduct life cycle asset management in residential developments built on transport systems.

Download or read book Annual Report of the Tax Commission and the Real Property Assessment Department written by New York (N.Y.). Tax Commission and published by . This book was released on 1908 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guideline for Condition Assessment of the Building Envelope written by Structural Engineering Institute and published by Amer Society of Civil Engineers. This book was released on 2000-01-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard provides a guideline and methodology for assessing the condition and performance of existing building envelope systems and components, and identifying problematic and dysfunctional elements. As the adaptive reuse, rehabilitation, and improvement of existing buildings have assumed a more prominent role in meeting national needs, the ability to accurately assess the conditions of a building is imperative. The condition of the building envelope is most important since failures can result in safety and health problems, as well as structural damage. Proper evaluation of the building envelope is often the first step toward stabilization and rehabilitation of the building. This Standard is a compilation of basic information, procedures, and references, and will be an asset to the investigator developing a logical approach to the assessment of the building envelope in order to focus on fundamental defects rather than outward symptoms.

Download or read book Assessment of Energy Efficient Building Details for Seismic Regions written by Boris Azinović and published by Springer Nature. This book was released on 2022 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents a methodology for the assessment of structural building details, taking into account the contemporary guidelines for earthquake-resistant and energy-efficient buildings. A review of structural details for energy-efficient buildings revealed that in some cases the structural system is interrupted, leading to solutions which are not suitable for earthquake-prone regions. Such typical examples would be the use of thermal insulation under the building foundation and reduction of the load-bearing elements’ dimensions – also at the potential locations of plastic hinges which are crucial for the dissipation of seismic energy. The proposed methodology of assessment favours a collaboration of architects, engineers, contractors and investors in the early stage of building design. By this the methodology enables efficient decision-making and contributes to a selection of optimal building structural details. The book starts by presenting the typical structural details of the thermal envelope of energy-efficient buildings together with the scientific background required for understanding the process of detail development from all the relevant aspects. Over 20 examples of most frequent details are described and analysed to raise awareness of the importance of earthquake resistance, sustainability, energy-efficiency and thermal comfort for users.

Download or read book Mitigation Assessment Team Report Hurricane Katrina in the Gulf Coast Building Performance Observations Recommendations and Technical Guidance written by and published by FEMA. This book was released on with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Energy Performance Assessment in Southern Europe written by Simone Ferrari and published by Springer. This book was released on 2015-10-16 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the issues relevant to the evaluation of the thermal energy balance of buildings in southern Europe and equips readers to carry out optimal building energy-performance assessments taking into account the peculiarities of the climatic context. Evaluation of building energy performance in this region is complex, since the significant need for cooling means that the effect of thermal capacity, glazed surfaces and ventilation and shading strategies have to be carefully considered when determining the indoor operative temperatures. This is fully explained, and critical issues in the application of the commonly employed, simplified procedures and assumptions are identified. In addition to the theoretical analysis, there are case studies that explore the energy performances of a set of typical building typologies within the variability of the Italian climate, considered as representative of conditions in southern Europe. These descriptions will support energy consultants and other stakeholders in assessing building energy performances beyond the mere simplified standard assumptions. Furthermore, the numerous graphs and tables documenting data can be easily adopted to serve as design advice tools for both new constructions and retrofits.

Download or read book Heat and Mass Transfer in Building Energy Performance Assessment written by Robert Černý and published by MDPI. This book was released on 2019-12-03 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The building industry is influenced by many factors and trends reflecting the current situation and developments in social, economic, technical, and scientific fields. One of the most important trends seeks to minimize the energy demand. This can be achieved by promoting the construction of buildings with better thermal insulating capabilities of their envelopes and better efficiency in heating, ventilation, and air conditioning systems. Any credible assessment of building energy performance includes the identification and simulation of heat and mass transfer phenomena in both the building envelope and the interior of the building. As the interaction between design elements, climate change, user behavior, heating effectiveness, ventilation, air conditioning systems, and lighting is not straightforward, the assessment procedure can present a complex and challenging task. The simulations should then involve all factors affecting the energy performance of the building in questions. However, the appropriate choice of physical model of heat and mass transfer for different building elements is not the only factor affecting the output of building energy simulations. The accuracy of the material parameters applied in the models as input data is another potential source of uncertainty. For instance, neglecting the dependence of hygric and thermal parameters on moisture content may affect the energy assessment in a significant way. Boundary conditions in the form of weather data sets represent yet another crucial factor determining the uncertainty of the outputs. In light of recent trends in climate change, this topic is vitally important. This Special Issue aims at providing recent developments in laboratory analyses, computational modeling, and in situ measurements related to the assessment of building energy performance based on the proper identification of heat and mass transfer processes in building structures. Potential topics include but are not limited to the following: -Development, calibration, and validation of advanced mathematical models for the description of heat and mass transfer in building materials and structures -Computational modeling of heat and mass transfer in building materials and structures aimed at energy performance assessment Boundary conditions for building energy performance simulations in light of climate change trends -Advanced experimental techniques for the determination of heat and mass transport and the storage properties of building materials -On site monitoring and verification of building energy performance -Research and development of new materials with high potential to improve the energy performance of buildings

Download or read book Fraud Risk Assessment written by Leonard W. Vona and published by John Wiley & Sons. This book was released on 2012-06-29 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive framework for building an effective fraud prevention model, Fraud Risk Assessment: Building a Fraud Audit Program presents a readable overview for developing fraud audit procedures and building controls that successfully minimize fraud. An invaluable reference for auditors, fraud examiners, investigators, CFOs, controllers, corporate attorneys, and accountants, this book helps business leaders respond to the risk of asset misappropriation fraud and uncover fraud in core business systems.

Download or read book Empirical Seismic Vulnerability and Resilience Assessment of Building Clusters written by Si-Qi Li and published by Elsevier. This book was released on 2024-03-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Empirical Seismic Vulnerability and Resilience Assessment of Building Clusters analyzes the seismic vulnerability analysis of 10 types of structures and studies and discusses the evaluation of structural damage using risk analysis and shaking table test methods. The book focuses on seismic vulnerabilities but does not consider the contribution of typical empirical structural seismic damage data to structural vulnerability assessment and prediction. In other words, the empirical data's role in regional seismic damage is omitted. It is recognized that the impact of earthquakes on large-scale areas is extensive, not only on a building but also on a group of buildings. This book is based on the research background of typical seismic damage characteristics of 11 types of engineering structures and is based on a large volume of pictures and data investigated by the author on-site. Characteristics of the vulnerability of various structures are analyzed, and measures and methods to improve the vulnerability of various structures are provided. Combined with probability risk, reliability, machine learning, and other means, vulnerability prediction and evaluation models are established, respectively, and the rationality of the models is verified by hundreds of on-site earthquake damage survey data. The above research and highlights are unique to this book, making it a key resource for academic researchers and practicing engineers in civil and seismic engineering, senior undergraduates, and graduate students. Increases engineers' theoretical and practical knowledge of field investigationand improves their efficiency and quality in future workIncludes the analyses of hundreds of earthquake field survey dataProvides a vulnerability assessment of diversified structural experience

Download or read book Mitigation Assessment Team Report Hurricane Ike in Texas and Louisiana Building Performance Observations Recommendations and Technical Guidance written by and published by FEMA. This book was released on with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: