Download or read book Building a Home Security System with Raspberry Pi written by Matthew Poole and published by Packt Publishing Ltd. This book was released on 2015-12-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build your own sophisticated modular home security system using the popular Raspberry Pi board About This Book This book guides you through building a complete home security system with Raspberry Pi and helps you remotely access it from a mobile device over the Internet It covers the fundamentals of interfacing sensors and cameras with the Raspberry Pi so that you can connect it to the outside world It follows a modular approach so that you can choose the modules and features you want for your customized home security system Who This Book Is For This book is for anyone who is interested in building a modular home security system from scratch using a Raspberry Pi board, basic electronics, sensors, and simple scripts. This book is ideal for enthusiastic novice programmers, electronics hobbyists, and engineering professionals. It would be great if you have some basic soldering skills in order to build some of the interface modules. What You Will Learn Understand the concepts behind alarm systems and intrusion detection devices Connect sensors and devices to the on-board digital GPIO ports safely Monitor and control connected devices easily using Bash shell scripting Build an I/O port expander using the I2C bus and connect sensors and anti-tamper circuits Capture and store images using motion detectors and cameras Access and manage your system remotely from your mobile phone Receive intrusion alerts and images through your e-mail Build a sophisticated multi-zone alarm system In Detail The Raspberry Pi is a powerful low-cost credit-card-sized computer, which lends itself perfectly as the controller for a sophisticated home security system. Using the on-board interfaces available, the Raspberry Pi can be expanded to allow the connection of a virtually infinite number of security sensors and devices. The Raspberry Pi has the processing power and interfaces available to build a sophisticated home security system but at a fraction of the cost of commercially available systems. Building a Home Security System with Raspberry Pi starts off by showing you the Raspberry Pi and how to set up the Linux-based operating system. It then guides you through connecting switch sensors and LEDs to the native GPIO connector safely, and how to access them using simple Bash scripts. As you dive further in, you'll learn how to build an input/output expansion board using the I2C interface and power supply, allowing the connection of the large number of sensors needed for a typical home security setup. In the later chapters of the book, we'll look at more sophisticated topics such as adding cameras, remotely accessing the system using your mobile phone, receiving intrusion alerts and images by e-mail, and more. By the end of the book, you will be well-versed with the use of Raspberry Pi to power a home-based security system that sends message alerts whenever it is triggered and will be able to build a truly sophisticated and modular home security system. You will also gain a good understanding of Raspberry Pi's ecosystem and be able to write the functions required for a security system. Style and approach This easy-to-follow guide comprises a series of projects, where every chapter introduces a new concept and at the end of the book, all these concepts are brought together to create an entire home security system. This book features clear diagrams and code every step of the way.

Download or read book Building a High Tech Alarm System with Raspberry Pi written by William Pretty and published by . This book was released on 2023-04-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Raspberry Pi Security System written by Chris Buchanan and published by . This book was released on 2019-07-29 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A how-to guide for setting up a Raspberry Pi home security system from scratch. Integrated with the cloud for access from anywhere with an internet connection. This guide can be used as a great introduction or learning tool to the Rapsberry Pi for beginners but also serves as a great project for anyone that already has experience with the Raspberry Pi or other micro-controllers. Comes with easy to follow along pictures and scripts as well as a list of everything needed to complete the system!Don't hesitate to add this fun project to your list for either yourself or the family!

Download or read book Building Smart Homes with Raspberry Pi Zero written by Marco Schwartz and published by Packt Publishing Ltd. This book was released on 2016-10-26 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build revolutionary and incredibly useful home automation projects with the all-new Pi Zero About This Book Create and program home automation projects using the Raspberry Pi Zero board Connect your Raspberry Pi Zero to a cloud API, and then build a cloud dashboard to control your devices Integrate all the projects into a complex project to automate key aspects of your home: data monitoring, devices control, and security Who This Book Is For This book is for enthusiasts and programmers who want to build powerful and inexpensive home automation projects using the Raspberry Pi zero, and to transform their home into a smart home. It is for those who are new to the field of home automation, or who already have experience with other platforms such as Arduino. What You Will Learn Learn how to measure and store data using the Raspberry Pi Zero board Control LED lights, lamps, and other electrical applications Send automated notifications by e-mail, SMS, or push notifications Connect motion detectors, cameras, and alarms Create automated alerts using Raspberry Pi Zero boards Control devices using cloud-based services Build a complete home automation system using Pi Zero In Detail The release of the Raspberry Pi Zero has completely amazed the tech community. With the price, form factor, and being high on utility—the Raspberry Pi Zero is the perfect companion to support home automation projects and makes IoT even more accessible. With this book, you will be able to create and program home automation projects using the Raspberry Pi Zero board. The book will teach you how to build a thermostat that will automatically regulate the temperature in your home. Another important topic in home automation is controlling electrical appliances, and you will learn how to control LED Lights, lamps, and other electrical applications. Moving on, we will build a smart energy meter that can measure the power of the appliance, and you'll learn how to switch it on and off. You'll also see how to build simple security system, composed of alarms, a security camera, and motion detectors. At the end, you will integrate everything what you learned so far into a more complex project to automate the key aspects of your home. By the end, you will have deepened your knowledge of the Raspberry Pi Zero, and will know how to build autonomous home automation projects. Style and approach This book takes a step-by-step approach to automate your home like never before!

Download or read book Building a Home Security System with Arduino written by Jorge R. Castro and published by . This book was released on 2015-08-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, build and maintain a home security system with Arduino UnoAbout This Book• Learn what a security system is, how it works and create one for yourself• Develop a security system by setting up security cameras and motion detector systems• Manage and analyze all the data collected by the sensors from the security system, using a graphical applicationWho This Book Is ForThis book is for novice programmers and hobbyists who want to understand how Arduino can be used to program a home security system as well as to those who want to delve deeper into the world of Arduino.What You Will Learn• Run cables and electricity to support home security infrastructure• Connect Arduino to your programming environment• Learn to interact with output devices – alarms, locks, shutters• Understand different parts of electronics circuit (MOSFET, resistor, capacitor)• Integrate home monitoring and security notifications with monitoring systems• Use logical level shifter with Arduino to send and receive data to and from Raspberry PIIn DetailArduino is an open source micro-controller built on a single circuit board that is capable of receiving sensory input from the environment and controlling interactive physical objects. It is also a development environment that allows the writing of software to the board, and is programmed in the Arduino programming language. It is used for a variety of different purposes and projects, from simple projects such as building a thermostat, to more advanced ones such as robotics, web servers, seismographs, home security systems and synthesizers.This book will demonstrate how the Arduino can be used to develop a highly connected home security system by mobilizing a network of sensors which can feed alerts back to an Arduino when alarms are triggered. You will know the current state of security systems, well supported by the designs that fit best for your environment. Also, we will see some current technologies such as NFC, Wi-Fi and Bluetooth, and will finally create a complete web interface that will allow us to remotely manage our system, and even send daily bulletins with the summary of activity.Towards the end, we'll develop a wireless home security system by setting up security cameras and motion detectors (door and gate trips, temperature sensors). We will then set up a centralized remote access hub (powered by the Arduino) that allows sensors to connect to the wireless home network that can be viewed and interacted by the user.Style and approachA step-by-step guide with numerous examples focusing on providing the practical skills required to build home security applications using Arduino.

Download or read book Raspberry Pi 3 Home Automation Projects written by Shantanu Bhadoria and published by Packt Publishing Ltd. This book was released on 2017-11-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: “With futuristic homes on the rise, learn to control and automate the living space with intriguing IoT projects.” About This Book Build exciting (six) end-to-end home automation projects with Raspberry Pi 3, Seamlessly communicate and control your existing devices and build your own home automation system, Automate tasks in your home through projects that are reliable and fun Who This Book Is For This book is for all those who are excited about building home automation systems with Raspberry Pi 3. It's also for electronic hobbyists and developers with some knowledge of electronics and programming. What You Will Learn Integrate different embedded microcontrollers and development boards like Arduino, ESP8266, Particle Photon and Raspberry Pi 3, creating real life solutions for day to day tasks and home automation Create your own magic mirror that lights up with useful information as you walk up to it Create a system that intelligently decides when to water your garden and then goes ahead and waters it for you Use the Wi-fi enabled Adafruit ESP8266 Huzzah to create your own networked festive display lights Create a simple machine learning application and build a parking automation system using Raspberry Pi Learn how to work with AWS cloud services and connect your home automation to the cloud Learn how to work with Windows IoT in Raspberry Pi 3 and build your own Windows IoT Face Recognition door locking system In Detail Raspberry Pi 3 Home Automation Projects addresses the challenge of applying real-world projects to automate your house using Raspberry Pi 3 and Arduino. You will learn how to customize and program the Raspberry Pi 3 and Arduino-based boards in several home automation projects around your house, in order to develop home devices that will really rejuvenate your home. This book aims to help you integrate different microcontrollers like Arduino, ESP8266 Wi-Fi module, Particle Photon and Raspberry Pi 3 into the real world, taking the best of these boards to develop some exciting home automation projects. You will be able to use these projects in everyday tasks, thus making life easier and comfortable. We will start with an interesting project creating a Raspberry Pi-Powered smart mirror and move on to Automated Gardening System, which will help you build a simple smart gardening system with plant-sensor devices and Arduino to keep your garden healthy with minimal effort. You will also learn to build projects such as CheerLights into a holiday display, a project to erase parking headaches with OpenCV and Raspberry Pi 3, create Netflix's "The Switch" for the living room and lock down your house like Fort Knox with a Windows IoT face recognition-based door lock system. By the end of the book, you will be able to build and automate the living space with intriguing IoT projects and bring a new degree of interconnectivity to your world. Style and approach End to end home automation projects with Raspberry Pi 3.

Download or read book Building Smart Devices and Home Automation Systems with Raspberry Pi and IoT written by Barrett Williams and published by Barrett Williams. This book was released on 2024-08-18 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlock the full potential of your home with *Building Smart Devices and Home Automation Systems with Raspberry Pi and IoT*—a comprehensive guide that takes you from novice to smart home expert. This eBook is your gateway to the exciting world of home automation, designed to make your life easier, safer, and more enjoyable. Start your journey by understanding the basics of smart home technology, its numerous components, and the undeniable advantages of turning your regular house into a smart one. Get hands-on experience with the versatile Raspberry Pi, learning how to set it up and create introductory projects that lay the groundwork for more complex systems. Dive into the fascinating Internet of Things (IoT), demystifying its role in home automation and getting familiar with key concepts and terminology. Navigate the sometimes overwhelming choice of sensors and actuators, selecting the right tools to build and customize your unique projects. Network setup can be daunting, but our step-by-step guide on configuring your home network ensures a secure and efficient connection for all your smart devices. Take control of your environment with mobile app integration and explore the power of voice control using AI assistants. Transform your lighting with smart, customizable systems, bolster your security with intelligent doorbells and cameras, and optimize your home climate with automated thermostats and air conditioners. Bring your entertainment system into the future with voice-controlled media centers and enhanced audio-visual setups. For those with green thumbs, our section on smart gardening will help you build automated watering systems and monitor plant health. Manage and monitor energy use effectively to create a more sustainable household. Don't stop at the basics—explore advanced projects like creating a personalized smart mirror or integrating wearable devices into your smart home ecosystem. Troubleshooting, maintenance tips, and security measures ensure your smart home remains efficient and safe. Look ahead to future trends in home automation and arm yourself with resources for continued learning. Transform your home today and step into the future with *Building Smart Devices and Home Automation Systems with Raspberry Pi and IoT*!

Download or read book Raspberry Pi Home Automation with Arduino Second Edition written by Andrew K. Dennis and published by Packt Publishing Ltd. This book was released on 2015-02-25 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are new to the Raspberry Pi, the Arduino, or home automation and wish to develop some amazing projects using these tools, then this book is for you. Any experience in using the Raspberry Pi would be an added advantage.

Download or read book Raspberry Pi Amazing Projects from Scratch written by Ashwin Pajankar and published by Packt Publishing Ltd. This book was released on 2016-09-26 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the powers of Raspberry Pi and build your very own projects right out of the box About This Book From robotics to gaming, this Learning Path will unlock your creativity! Build your own impressive IoT projects to transform your home Featuring some of Packt's very best Raspberry Pi content, this Learning Path doesn't just get you to your destination – it opens up a whole horizon of possibilities! Who This Book Is For Want new ideas for your next Raspberry Pi project? Got one lying around gathering dust? This Learning Path gets you straight into the creative dirty work of programming and playing with your pi. Whether your new to Raspberry Pi, or an experienced maker, we think this Learning Path will inspire you and get your creative juices flowing! What You Will Learn Discover an aweome range of Raspberry Pi projects Bridge the gap between software and hardware through your Pi and find out how to make an operating system interact with cameras and other hardware Find out how to use your Raspberry Pi for gaming Secure your home with this tiny computer! Make science fiction a reality – build a walking robot In Detail Looking for inspiration for your next Raspberry Pi project? Not sure where to begin? This Learning Path is the perfect place to begin, providing you with an accessible yet comprehensive journey through Raspberry Pi. Following three modules, you'll soon be confident and prepared to get creative with your microcomputer. Raspberry Pi by Example is the first module in this Learning Path – and it does exactly what it says. It doesn't just teach, it shows you how to go and build some awesome Raspberry Pi projects immediately. Build and play your own games with the Pi, build a complete Internet of Things home automation system that controls your house through Twitter... let your imagination run wild! In the next module we'll look in more depth at building a home security system. You'll be using some of the skills you devoped through the first module, but apply them to something more intricate and impressive. Using a Linux based operating system as the foundations, you'll gradually build up an entire security infrastructure adding cameras, remote controls, and even intrusion alerts! In the final module, we'll take you into the world of Raspberry Pi robotics. By the end of it, you'll have built a biped robot that can interact with its environment! This Learning Path combines some of the best that Packt has to offer in one complete, curated package. It includes content from the following Packt products: Raspberry Pi By Example by Ashwin Pajankar and Arush Kakkar Building a Home Security System with Raspberry Pi by Matthew Pole Raspberry Pi Robotics Essentials by Richard Grimmett Style and approach It's not every day you build a home automation system. It's not every day you build a walking robot. But with this Learning Path you'll do just that. So get started and let this tiny computer expand your imagination.

Download or read book Raspberry Pi for Secret Agents written by Matthew Poole and published by Packt Publishing Ltd. This book was released on 2016-07-27 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turn your Raspberry Pi into a secret agent toolbox with this set of exciting projects About This Book Turn your Raspberry Pi into a multi-purpose secret agent gadget for audio and video surveillance, Wi-Fi exploration, or playing pranks on your friends Detect an intruder on camera or with sensors and set off an alarm or receive messages to your phone Find out what the other computers on your network are up to and make yourself anonymous on the Internet This book has been updated for new additions to your toolkit featuring the tiny, recently released Raspberry Pi Zero board Who This Book Is For This book is for those who are new to the Raspberry Pi Zero ,Raspberry Pi 2 or Raspberry Pi 3 and have some experience with the original Raspberry Pi models, and even for those budding secret agents who would like to use Pi Zero as a secret agent toolbox. No programming experience is assumed. Suitable for the novice and expert alike, each topic provides a fast and easy way to get started with exciting applications, with practical examples in every chapter. What You Will Learn Install and configure the Raspbian Jessie operating system for maximum mischief Detect an intruder with motion detection or a laser trip wire and set off an alarm Listen in to conversations from a distance over Bluetooth Distort your voice in weird and wonderful ways Track the Pi's whereabouts using GPS Connect your Pi to the mobile Internet using a 3G dongle and make yourself anonymous on the net Display secret messages and codes to fellow agents on a LED display In Detail This book is for all mischievous Raspberry Pi owners who'd like to see their computer transform into a neat spy gadget to be used in a series of practical pranks and projects. No previous skills are required to follow along, and if you're completely new to Linux, you'll pick up much of the basics for free. We'll help you set up your Raspberry Pi Zero , Raspberry Pi 2 and Raspberry Pi 3 and guide you through a number of pranks and secret agent techniques that are so inconspicuous yet high on mischief. You'll learn how to configure your operating system for maximum mischief and start exploring audio, video, or Wi-Fi techniques. We'll show you how to record, listen, or talk to people from a distance and how to set up your own phone network. Then, you'll plug in your webcam and set up a motion detector with an alarm and find out what the other computers on your Wi-Fi network are up to. Once you've mastered the techniques, we'll combine them with a battery pack and GPS for the ultimate off-road spy kit. Style and Approach This easy-to-follow guide is for budding secret agents who want to create tools for mischief, stealth, and reconnaissance. It's full of fun, practical examples and easy-to-follow recipes, guaranteeing maximum mischief for all skill levels.

Download or read book Smart Home Automation with Linux and Raspberry Pi written by Steven Goodwin and published by Apress. This book was released on 2013-07-27 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Home Automation with Linux and Raspberry Pi shows you how to automate your lights, curtains, music, and more, and control everything via a laptop or mobile phone. You'll learn how to use Linux, including Linux on Raspberry Pi, to control appliances and everything from kettles to curtains, including how to hack game consoles and even incorporate LEGO Mindstorms into your smart home schemes. You’ll discover the practicalities on wiring a house in terms of both and power and networking, along with the selection and placement of servers. There are also explanations on handling communication to (and from) your computer with speech, SMS, email, and web. Finally, you’ll see how your automated appliances can collaborate to become a smart home. Smart Home Automation with Linux was already an excellent resource for home automation, and in this second edition, Steven Goodwin will show you how a house can be fully controlled by its occupants, all using open source software and even open source hardware like Raspberry Pi and Arduino.

Download or read book Raspberry Pi Home Monitoring and Control written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Help your home keep up with you-and stay connected to what's going on when you're away-with a custom home monitoring system built with a Raspberry Pi. With some inexpensive hardware and simple web services, you can monitor your house remotely via photo or video surveillance, detect motion, turn lights on and off, and send messages to your phone when different alarms are triggered. This DIY electronics project provides simple directions for getting your home monitoring system up and running. Author David Ross helps you select a power supply, camera, motion detector, enclosure, and other components and accessories, and make your system "smart" by connecting to web services frameworks such as Weaved and WebIOPi. Then he helps you program the logic to make your Pi camera take pictures and stream video, connect to home peripherals, and mount your alarm system. With this training, and a little elbow grease, you can create a fully autonomous system that helps you and your family feel more secure at home and away. Note: These instructions work with Raspberry Pi B, Raspberry Pi B+, and Raspberry Pi 2 models.

Download or read book RASPBERRY Pi SMART HOME GUIDE written by Frank L Sherman and published by Independently Published. This book was released on 2023-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the world of home automation powered by Raspberry Pi! "Raspberry Pi Smart Home" serves as your comprehensive guide to creating an efficient and personalized smart home using the versatile Raspberry Pi microcomputer. Whether you're a beginner or a tech enthusiast, this book equips you with the knowledge and practical steps needed to transform your residence into a cutting-edge, interconnected, and automated living space. Inside these pages, you'll discover: Fundamentals of Home Automation: Explore the principles and concepts behind smart home technology, understanding the components required for seamless automation. Raspberry Pi Essentials: Learn the basics of Raspberry Pi, its setup, configuration, and how to harness its power to control and manage various smart devices. DIY Projects: Dive into hands-on projects guiding you through the creation of a range of smart home systems. From setting up automated lighting and temperature control to creating security systems and voice-controlled assistants, each project provides step-by-step instructions and coding examples. Integration and Expansion: Unleash the full potential of your smart home by integrating different technologies, platforms, and sensors. Explore methods to expand your system, add new functionalities, and customize it to suit your specific needs. Troubleshooting and Optimization: Gain insights into resolving common issues, optimizing performance, and ensuring the security of your smart home network. Empower yourself to take control of your home environment and elevate your lifestyle with "Raspberry Pi Smart Home.

Download or read book Internet of Things Programming Projects written by Colin Dow and published by Packt Publishing Ltd. This book was released on 2018-10-31 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical project-based guide to help you build and control your IoT projects Key FeaturesLeverage the full potential of IoT with the combination of Raspberry Pi 3 and PythonBuild complex Python-based applications with IoTWork on various IoT projects and understand the basics of electronicsBook Description The Internet of Things (IOT) has managed to attract the attention of researchers and tech enthusiasts, since it powerfully combines classical networks with instruments and devices. In Internet of Things Programming Projects, we unleash the power of Raspberry Pi and Python to create engaging projects. In the first part of the book, you’ll be introduced to the Raspberry Pi, learn how to set it up, and then jump right into Python programming. Then, you’ll dive into real-world computing by creating a“Hello World” app using flash LEDs. As you make your way through the chapters, you’ll go back to an age when analog needle meters ruled the world of data display. You’ll learn to retrieve weather data from a web service and display it on an analog needle meter, and build a home security system using the Raspberry Pi. The next project has a modern twist, where we employ the Raspberry Pi to send a signal to a web service that will send you a text when someone is at the door. In the final project, you take what you've learned from the previous two projects and create an IoT robot car that you can use to monitor what your pets are up to when you are away. By the end of this book, you will be well versed in almost every possible way to make your IoT projects stand out. What you will learnInstall and set up a Raspberry Pi for IoT developmentLearn how to use a servo motor as an analog needle meter to read dataBuild a home security dashboard using an infrared motion detectorCommunicate with a web service that sends you a message when the doorbell ringsReceive data and display it with an actuator connected to the Raspberry PiBuild an IoT robot car that is controlled through the internetWho this book is for Internet of Things Programming Projects is for Python developers and programmers who are interested in building their own IoT applications and IoT-based projects. It is also targeted at IoT programmers and developers who are looking to build exciting projects with Python.

Download or read book Raspberry Pi written by Thorin Klosowski and published by Penguin. This book was released on 2015-06-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Raspberry Pi is an inexpensive, simple computer that's about the size of a credit card. It has multiple inputs and outputs that make it the foundation for almost a limitless number of projects — from creating a wi-fi hot spot to an elaborate, programmed LED light show. Idiot's Guides: Raspberry Pi is the perfect beginner book for learning how it works, how to program it (using Scratch, a basic program for programming Linux), how to connect it to an existing device, and how to put together some basic first projects.

Download or read book Internet of Things with Raspberry Pi 3 written by Maneesh Rao and published by Packt Publishing Ltd. This book was released on 2018-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unleash the power of the Raspberry Pi 3 board to create interesting IoT projects Key Features Learn how to interface various sensors and actuators with the Raspberry Pi 3 and send this data to the cloud. Explore the possibilities offered by the IoT by using the Raspberry Pi to upload measurements to Google Docs. A practical guide that will help you create a Raspberry Pi robot using IoT modules. Book Description This book is designed to introduce you to IoT and Raspberry Pi 3. It will help you create interesting projects, such as setting up a weather station and measuring temperature and humidity using sensors; it will also show you how to send sensor data to cloud for visualization in real-time. Then we shift our focus to leveraging IoT for accomplishing complex tasks, such as facial recognition using the Raspberry Pi camera module, AWS Rekognition, and the AWS S3 service. Furthermore, you will master security aspects by building a security surveillance system to protect your premises from intruders using Raspberry Pi, a camera, motion sensors, and AWS Cloud. We'll also create a real-world project by building a Wi-Fi – controlled robot car with Raspberry Pi using a motor driver circuit, DC motor, and a web application. This book is a must-have as it provides a practical overview of IoT’s existing architectures, communication protocols, and security threats at the software and hardware levels—security being the most important aspect of IoT. What you will learn Understand the concept of IoT and get familiar with the features of Raspberry Pi Learn to integrate sensors and actuators with the Raspberry Pi Communicate with cloud and Raspberry using communication protocols such as HTTP and MQTT Build DIY projects using Raspberry Pi, JavaScript/node.js and cloud (AWS) Explore the best practices to ensure the security of your connected devices Who this book is for If you're a developer or electronics engineer and are curious about the Internet of Things, then this is the book for you. With only a rudimentary understanding of electronics, the Raspberry Pi, or similar credit-card sized computers, and some programming experience, you will be taught to develop state-of-the-art solutions for the Internet of Things in an instant.

Download or read book Building a Home Security System with BeagleBone written by Bill Pretty and published by Packt Publishing Ltd. This book was released on 2013-12-17 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building a Home Security System with BeagleBone is a practical, hands-on guide for practical, hands-on people. The book includes step-by-step instructions for assembling your own hardware on professionally manufactured PCB’s and setting up the software on your system. This book is for anyone who is interested in alarm systems and how they work; for hobbyists and basement tinkerers who love to build things. If you want to build the hardware described in this book, you will need some basic soldering skills, but all the parts are of the thru-hole variety and are very easy to put together. When it comes to software, you can just run it as-is, but if you want to modify the code, you will need knowledge of Java and IDEs.