Download or read book Buckling of Ship Structures written by Mohamed Shama and published by Springer Science & Business Media. This book was released on 2012-08-04 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures. The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structural members. It is very useful to ship designers, shipyard engineers, naval architects, international classification societies and also to students studying naval architecture, marine engineering and offshore structures. It is a valuable source for practicing naval architects to quickly check the possibility of buckling of ship structure members without reverting to the complex and costly analysis using advanced FEM software.
Download or read book Buckling and Ultimate Strength of Ship and Ship like Floating Structures written by Tetsuya Yao and published by Butterworth-Heinemann. This book was released on 2016-08-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buckling and Ultimate Strength of Ship and Ship-like Floating Structures provides an integrated state-of-the-art evaluation of ship structure mechanics including buckling, plastic failure, ultimate strength, and ultimate bending moments. For the design of any industrial product, it is necessary to understand the fundamentals in the failure behavior of structures under extreme loads. Significant developments have been made in understanding the analysis method of plastic collapse and behavior and strength of structures accompanied by buckling. Written by two of the foremost experts in international ship design and ocean engineering, this book introduces fundamental theories and methods as well as new content on the behavior of buckling/plastic collapse that help explain analysis like the initial imperfections produced by welding and the ultimate strength of plates, double bottom structures of bulk carriers, and ship and FPSO hull girders in longitudinal bending. Rounding out with additional coverage on floating structures such as oil and gas platforms and LNG/FLNG structural characteristics, Buckling and Ultimate Strength of Ship and Ship-like Floating Structures is a must-have resource for naval architects and other marine engineering professionals seeking to gain an in-depth understanding of the technological developments in this area. - Explains how the initial imperfections produced by welding, residual stress, and initial deflection in panels influence the collapse behavior and the compressive ultimate strength of rectangular plates - Evaluates the ultimate strength of plate girders under bending and shearing as well as combined bend/shear loads - Provides fundamental theories, simple formulas, and analytical methods such as Finite Element Method or Smith's Method to simulate and evaluate buckling/plastic collapse behavior and strength of plates under various conditions - Authored by two of the foremost experts in international ship design and ocean engineering - Includes additional coverage on floating structures such as oil and gas platforms
Download or read book Buckling Design in Ship Structures written by E. M. Q. Røren and published by . This book was released on 1975 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2009-03-06 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Analysis and Design of Marine Structures' explores recent developments in methods and modelling procedures for structural assessment of marine structures: - Methods and tools for establishing loads and load effects; - Methods and tools for strength assessment; - Materials and fabrication of structures; - Methods and tools for structural design and optimisation; - Structural reliability, safety and environment protection. The book is a valuable reference source for academics, engineers and professionals involved in marine structures and design of ship and offshore structures.
Download or read book Ship Structural Design Concepts Second Cycle written by J. Harvey Evans and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 1983 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Marine Structures V written by C. Guedes Soares and published by CRC Press. This book was released on 2015-03-11 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design of Marine Structures V contains the papers presented at MARSTRUCT 2015, the 5th International Conference on Marine Structures (Southampton, UK, 25-27 March 2015). The MARSTRUCT series of conferences started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal (2009), while the third was in Hambur
Download or read book Buckling of Structures written by B. Budiansky and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the written texts of the papers presented at a Symposium on Buckling of Structures held at Harvard University in June 1974. This symposium, one of several on various topics sponsored annually by the International Union of Theoretical and Applied Me chanics (IUTAM), was organized by a Scientific Committee consisting of B. Budiansky (Chairman), A. H. Chilver, W. T. Koiter, and A. S. Vol' mir. Participation was by invitation of the Scientific Committee, and specific lecturers were invited to speak in the areas of experimental research, buckling and post-buckling calculations, post-buckling mode interaction, plasticity and creep effects, dynamic buckling, stochastic problems, and design. A total of 29 lectures were delivered, including a general opening lecture by Professor Koiter, and there were 93 reg istered participants from 16 different countries. Financial support for the symposium was provided by IUTAM, in the form of partial travel support for a number of participants, and also by the National Science Foundation, the National Aeronautics and Space Administration, and the Air Force Office of Scientific Re search, for additional travel support and administrative expenses. Meeting facilities and services were efficiently provided by the Science Center of Harvard University, and administrative support was gen erously provided by the Division of Engineering and Applied Physics of Harvard University. The scientific chairman enjoyed the invaluable assistance of his colleagues Professors J. W. Hutchinson and J. L.
Download or read book Design of Ships Structures written by D. W. Chalmers and published by Stationery Office Books (TSO). This book was released on 1993 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the methods for the design of ships' structures. These methods are applicable to any medium or large vessel designed by direct calculation, as well as to the warship hulls on which the book was originally based, as these are invariably designed without recourse to classification society rules. Taking as its starting point an assumed functional specification, it shows how a structure can be created to meet this requirement.
Download or read book Tree Biotechnology written by Kishan Gopal Ramawat and published by CRC Press. This book was released on 2014-04-01 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forest trees cover 30% of the earth's land surface, providing renewable fuel, wood, timber, shelter, fruits, leaves, bark, roots, and are source of medicinal products in addition to benefits such as carbon sequestration, water shed protection, and habitat for 1/3 of terrestrial species. However, the genetic analysis and breeding of trees has lagged behind that of crop plants. Therefore, systematic conservation, sustainable improvement and pragmatic utilization of trees are global priorities. This book provides comprehensive and up to date information about tree characterization, biological understanding, and improvement through biotechnological and molecular tools.
Download or read book Ship Structural Design written by Owen F. Hughes and published by Wiley-Interscience. This book was released on 1983 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide for the Analysis of Ship Structures written by National Research Council (U.S.). Committee on Ship Structural Design and published by . This book was released on 1960 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buckling and Vibration of a Ship s Vee Bottom Structure written by Charles Stuart Smith and published by . This book was released on 1974 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is shown that analysis of overall buckling or vibration of a ship's vee-bottom structure may be represented approximately as a simple two-degree-of-freedom eigenvalue problem. Details are given of an analysis procedure which is readily programmed for a small digital computer. Solutions have been computed for a range of typical vee-bottom structures and results are presented in the form of data-curves from which buckling loads or natural frequencies of vibration may be estimated for most practical systems with sufficient accuracy for initial design purposes. The method of analysis and data curves are particularly relevant to GRP ships, in which overall buckling may occur at stresses well below the material ultimate strength, but are also applicable to steel single-bottom structures. (Author).
Download or read book The Maritime Engineering Reference Book written by Anthony F. Molland and published by Elsevier. This book was released on 2011-10-13 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Maritime Engineering Reference Book is a one-stop source for engineers involved in marine engineering and naval architecture. In this essential reference, Anthony F. Molland has brought together the work of a number of the world's leading writers in the field to create an inclusive volume for a wide audience of marine engineers, naval architects and those involved in marine operations, insurance and other related fields. Coverage ranges from the basics to more advanced topics in ship design, construction and operation. All the key areas are covered, including ship flotation and stability, ship structures, propulsion, seakeeping and maneuvering. The marine environment and maritime safety are explored as well as new technologies, such as computer aided ship design and remotely operated vehicles (ROVs).Facts, figures and data from world-leading experts makes this an invaluable ready-reference for those involved in the field of maritime engineering.Professor A.F. Molland, BSc, MSc, PhD, CEng, FRINA. is Emeritus Professor of Ship Design at the University of Southampton, UK. He has lectured ship design and operation for many years. He has carried out extensive research and published widely on ship design and various aspects of ship hydrodynamics.* A comprehensive overview from best-selling authors including Bryan Barrass, Rawson and Tupper, and David Eyres* Covers basic and advanced material on marine engineering and Naval Architecture topics* Have key facts, figures and data to hand in one complete reference book
Download or read book Design of Ship Hull Structures written by Yasuhisa Okumoto and published by Springer Science & Business Media. This book was released on 2009-03-25 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the four authors show us the condensed experience how to design ship hull structures from a practical viewpoint. In three parts, the book presents the fundamentals, the theory and the application of structural design of hulls. The topics are treated comprehensively with an emphasis on how to achieve reliable and efficient ship structures. The authors have in particular introduced their experiences with the rapid increase of ship sizes as well as the introduction of ship types with a high degree of specialization. The associated early failures of these "new" structures have been analyzed to provide the readers with illustrations why structural design needs to be carried out on several levels in order to ensure that correct loading is applied and that local structural behaviour in properly understood.
Download or read book Analysis of Ship Structures written by Johannes Moe and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.
Download or read book Advances in the Analysis and Design of Marine Structures written by J. W. Ringsberg and published by CRC Press. This book was released on 2023-04-14 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2023, the 9th International Conference on Marine Structures, held in Gothenburg, Sweden, 3-5 April 2023. The conference was organised by the Division of Marine Technology, Department of Mechanics and Maritime Sciences at Chalmers University of Technology, in Gothenburg, Sweden. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: Methods and tools for loads and load effects Methods and tools for strength assessment Experimental analysis of structures Materials and fabrication of structures Methods and tools for structural design and optimization Structural reliability, safety, and environmental protection The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, the seventh in Dubrovnik, Croatia in May 2019, and the eighth event in Trondheim, Norway in June 2021. Advances in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.
