Download or read book Graphene Based Polymer Nanocomposites in Electronics written by Kishor Kumar Sadasivuni and published by Springer. This book was released on 2015-01-19 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers graphene reinforced polymers, which are useful in electronic applications, including electrically conductive thermoplastics composites, thermosets and elastomers. It systematically introduces the reader to fundamental aspects and leads over to actual applications, such as sensor fabrication, electromagnetic interference shielding, optoelectronics, superconductivity, or memory chips. The book also describes dielectric and thermal behaviour of graphene polymer composites - properties which are essential to consider for the fabrication and production of these new electronic materials. The contributions in this book critically discuss the actual questions in the development and applications of graphene polymer composites. It will thus appeal to chemists, physicists, materials scientists as well as nano technologists, who are interested in the properties of graphene polymer composites.

Download or read book Plastics Polyamide PA Moulding and Extrusion Materials Designation written by British Standards Institute Staff and published by . This book was released on 2001 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics and rubber technology, Plastics, Thermosetting polymers, Polyamides, Polymers, Moulded materials, Extruding, Thermoplastic polymers, Designations, Classification systems, Viscosity measurement, Modulus of elasticity

Download or read book Paper and Board Testing of Cores written by British Standards Institution and published by . This book was released on 1997 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Contact Mechanics written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2008-04-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics of this book span the range from spatial and temporal discretization techniques for contact and impact problems with small and finite deformations over investigations on the reliability of micromechanical contact models over emerging techniques for rolling contact mechanics to homogenization methods and multi-scale approaches in contact problems.

Download or read book Advances in Numerical Methods written by Nikos Mastorakis and published by Springer Science & Business Media. This book was released on 2009-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Numerical Methods features contributions from distinguished researchers, focused on significant aspects of current numerical methods and computational mathematics. The increasing necessity to present new computational methods that can solve complex scientific and engineering problems requires the preparation of this volume with actual new results and innovative methods that provide numerical solutions in effective computing times. Each chapter will present new and advanced methods and modern variations on known techniques that can solve difficult scientific problems efficiently.

Download or read book Particle Based Methods written by Eugenio Oñate and published by Springer Science & Business Media. This book was released on 2011-02-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains 11 chapters written by relevant scientists in the field of particle-based methods and their applications in engineering and applied sciences. The chapters cover most particle-based techniques used in practice including the discrete element method, the smooth particle hydrodynamic method and the particle finite element method. The book will be of interest to researchers and engineers interested in the fundamentals of particle-based methods and their applications.

Download or read book Advances in Design Optimization written by H. Adeli and published by CRC Press. This book was released on 2002-09-11 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes advances in a number of fundamental areas of optimization with application in engineering design. The selection of the 'best' or 'optimum' design has long been a major concern of designers and in recent years interest has grown in applying mathematical optimization techniques to design of large engineering and industrial systems, and in using the computer-aided design packages with optimization capabilities which are now available.

Download or read book Recent Advances in Boundary Element Methods written by George Manolis and published by Springer Science & Business Media. This book was released on 2009-05-12 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, dedicated to Professor Dimitri Beskos, contains contributions from leading researchers in Europe, the USA, Japan and elsewhere, and addresses the needs of the computational mechanics research community in terms of timely information on boundary integral equation-based methods and techniques applied to a variety of fields. The contributors are well-known scientists, who also happen to be friends, collaborators as past students of Dimitri Beskos. Dimitri is one the BEM pioneers who started his career at the University of Minnesota in Minneapolis, USA, in the 1970s and is now with the University of Patras in Patras, Greece. The book is essentially a collection of both original and review articles on contemporary Boundary Element Methods (BEM) as well as on the newer Mesh Reduction Methods (MRM), covering a variety of research topics. Close to forty contributions compose an over-500 page volume that is rich in detail and wide in terms of breadth of coverage of the subject of integral equation formulations and solutions in both solid and fluid mechanics.

Download or read book Process Intensification in Chemical Engineering written by Juan Gabriel Segovia-Hernández and published by Springer. This book was released on 2016-04-02 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide researchers and graduate students with an overview of the recent developments and applications of process intensification in chemical engineering. It will also allow the readers to apply the available intensification techniques to their processes and specific problems. The content of this book can be readily adopted as part of special courses on process control, design, optimization and modelling aimed at senior undergraduate and graduate students. This book will be a useful resource for researchers in process system engineering as well as for practitioners interested in applying process intensification approaches to real-life problems in chemical engineering and related areas.

Download or read book Plastics Polypropylene PP Moulding and Extrusion Materials Designation System and Basis for Specifications written by British Standards Institute Staff and published by . This book was released on 1995-12-15 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics, Polymers, Polypropylene, Thermoplastic polymers, Moulding (process), Moulded materials, Extruding, Designations, Modulus of elasticity, Tensile stress, Tensile strain, Impact strength, Viscosity, Weight (mass)

Download or read book Control of Flexible Structures written by Kirsten A. Morris and published by American Mathematical Soc.. This book was released on 1993-01-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible structures arise in significant important areas of application, such as robotics, large space structures, and antenna control. Difficulties related to sensing and identification hamper control of such systems. These problems require collaboration between mathematicians and engineers. To promote such collaboration, the Fields Institute sponsored a three-day workshop entitled "Problems in Sensing, Identification and Control of Flexible Structures" in June 1992. This volume contains papers presented at the workshop. Topics range from theoretical research on the well-posedness of systems, to experimental implementations of various controllers. A number of controller design techniques are discussed and compared, and there are several papers on modelling the complex dynamics of flexible structures. This book is a useful resource to control theorists, engineers, and mathematicians interested in this important field of research.

Download or read book Plastics Fluoropolymer Dispersions and Moulding and Extrusion Materials Designation System and Basis for Specifications written by British Standards Institute Staff and published by . This book was released on 1917-10-04 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designations, Polymers, Polytetrafluoroethylene, Fluorocarbons, Physical properties of materials, Plastics, Moulding (process), Fillers, Thermoplastic polymers, Dispersions (chemical), Extruding

Download or read book Plastics Polypropylene PP Moulding and Extrusion Materials Preparation of Test Specimens and Determination of Properties written by British Standards Institute Staff and published by . This book was released on 1916-03-31 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polypropylene, Thermoplastic polymers, Polymers, Plastics, Moulded materials, Specimen preparation, Test specimens, Dimensions, Testing conditions, Mechanical testing, Thermal testing, Injection moulding, Electrical testing, Water-absorption tests

Download or read book Plastics Poly phenylene Sulfide PPS Moulding and Extrusion Materials Preparation of Test Specimen and Determination of Properties written by British Standards Institute Staff and published by . This book was released on 1918-05-08 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing conditions, Moulding (process), Specimen preparation, Polyphenylene, Extruding, Sulfides, Moulded materials, Thermoplastic polymers, Test specimens, Plastics

Download or read book Plastics Poly Phenylene Sulfide PPS Moulding and Extrusion Materials Preparation of Test Specimens and Determination of Properties written by British Standards Institute Staff and published by . This book was released on 1910-04-30 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics, Thermoplastic polymers, Polyphenylene, Sulfides, Moulding (process), Moulded materials, Extruding, Test specimens, Specimen preparation, Testing conditions

Download or read book Plastics Poly phenylene Sulfide PPS Moulding and Extrusion Materials Designation System and Basis for Specifications written by British Standards Institute Staff and published by . This book was released on 1918-05-09 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Codes, Classification systems, Polyphenylene, Moulded materials, Fillers, Thermoplastic polymers, Extruding, Moulding (process), Designations, Physical properties of materials, Plastics, Sulfides, Reinforcing materials

Download or read book Plastics Poly phenylene Ether PPE Moulding and Extrusion Materials Designation System and Basis for Specifications written by British Standards Institute Staff and published by . This book was released on 2004-08-01 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic polymers, Polymers, Moulding (process), Moulded materials, Extruding, Plastics, Designations, Classification systems, Impact strength, Flammability, Temperature, Deflection tests