Download or read book Concrete Petrography written by Alan B. Poole and published by CRC Press. This book was released on 2016-12-19 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic reference has established the value of petrography as a powerful method for the investigation of concrete as a material. It provides an authoritative and well-illustrated review of concrete composition and textures, including the causes of defects, deterioration, and failure that can be identified using a petrological microscope. This new edition is entirely revised and updated and also greatly extended to take account of new scientific developments and significant improvements in instrumentation and to reflect current laboratory working practices, as well as to reflect new understanding of the performance of concrete and related materials. Now in full color throughout, Concrete Petrography, Second Edition provides case study examples, with appropriate explanatory discussions and practical advice on selecting, handling and preparing specimens. It assists and guides the engineer, the trainee and the experienced petrographer in understanding the scientific evidence that is basic to petrographic analysis and so will lead to more accurate and timely diagnosis and treatment of problems in structural concrete. This book includes: Contributions in specialist areas by internationally recognized experts Explanation of computer techniques as an aid to petrography Full coverage of inspection, sampling, and specimen preparation New sections covering recent technological development of equipment Guidance on observation of cement and concrete mineralogy and microfabrics Discussion and illustrative examples of deterioration and failure mechanisms New work and guidance on the determination of water/cement ratio New color illustrations and micrographs throughout Thorough updating of standards, other authoritative publications, and references A fully revised, extended, and updated glossary of optical and other properties

Download or read book Specification for the Construction of Slurry Trench Cut off Walls as Barriers to Pollution Migration written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1999 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification, and the appended notes for guidance, has been compiled to be used where slurry trench cut-off walls are required to act as barriers to pollution migration. It provides a standard and consistent approach to the design, construction, testing and monitoring of cut-off walls, guidance on the appropriateness of this technique and current best practice.

Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2007 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork -- Blocks and blockwork -- Lime, cement and concrete -- Timber and timber products -- Ferrous and non-ferrous metals -- Bitumen and flat roofing materials -- Glass -- Ceramic materials -- Stone and cast stone -- Plastics -- Glass-fibre reinforced plastics, cement and gypsum -- Plaster and board materials -- Insulating materials -- Energy-saving materials and components -- Recycled and ecological materials -- Sealants, gaskets and adhesives -- Paints, wood stains, varnishes and colour.

Download or read book ICE Handbook of Concrete Durability written by Marios Soutsos and published by Emerald Group Publishing. This book was released on 2023-10-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Handbook of Concrete Durability, second edition is a comprehensive practical reference for professionals involved in design and maintenance of concrete structures of all types. It is an invaluable guide for construction professionals, including design engineers, consultants and contractors, as well as postgraduate students.

Download or read book Concrete Materials written by Dr Maurice Levitt and published by CRC Press. This book was released on 1997-09-25 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author condenses a lifetime of practical experience into this book that will provide a first point of reference whenever problems with materials accur on site. Valuable for anyone working with concrete.

Download or read book Euro Cements written by Ravindra Dhir and published by CRC Press. This book was released on 2002-11-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the implications of the new European standard for cements. It brings together contributions from leading experts involved with the drafting and implementation of ENV 197 and will facilitate discussion on its application. The book is derived from a seminar held at the University of Dundee in September 1994.

Download or read book Waste and Supplementary Cementitious Materials in Concrete written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2018-06-05 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. - Focuses on material properties and applications (as well as 'sustainability' aspects) of cementitious materials - Assembles leading researchers from diverse areas of study - Ideas for use as a 'one stop' reference for advanced postgraduate courses focusing on sustainable construction materials

Download or read book Mineral Admixtures in Cement and Concrete written by Jayant D. Bapat and published by CRC Press. This book was released on 2012-08-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to meet the requirements of engineers working in construction and concrete manufacturing, Mineral Admixtures in Cement and Concrete focuses on how to make more workable and durable concrete using mineral admixtures. In particular, it covers pulverized fuel ash (PFA), blast furnace slag (BFS), silica fume (SF), rice husk ash (RHA), and metakaolin (MK), as well as some new admixtures currently under investigation. For each mineral admixture, the book looks at manufacturing and processing, physical characteristics, chemical and mineralogical composition, quality control, and reported experiences. It also examines the provisions of national standards on the admixture’s addition to cement and concrete. References to microstructures and chemistry are kept to a minimum and only discussed to the extent necessary to help readers apply the admixtures in practice. The book also addresses hydration, presenting the relevant chemistry and detailing the impact of adding mineral admixtures to concrete. A chapter on strength and durability explains the mechanisms, models, and standards related to concrete deterioration and how to mitigate carbonation, alkali-aggregate reactions, chloride attack and corrosion of reinforcement, external and internal sulphate attack, decalcification, and freeze-thaw action. This book is a useful reference for practicing engineers and students alike. It brings together, in one volume, information on the materials, hydration, and the strength and durability of cement and concrete with mineral admixtures. Offering a deeper understanding of mineral admixtures, it encourages engineers to more effectively use these and other wastes in cement and concrete to support more sustainable growth of the cement and construction industry.

Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Elsevier. This book was released on 2003-11-12 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.

Download or read book Structural Defects Reference Manual for Low Rise Buildings written by Michael F. Atkinson and published by CRC Press. This book was released on 2014-04-21 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structural Defects Reference Manual for Low-Rise Buildings has been written to assist professionals and students involved in building construction to identify causes of structural failure. Each chapter carefully addresses design, materials and workmanship factors which contribute to structural defects. The main structural elements - roofs, wall

Download or read book Building Regulations Explained written by London District Surveyors Association and published by Routledge. This book was released on 2003-09-02 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised essential reference takes into account all important aspects of building control, including new legislation up to Spring 2000 with important revisions to parts B, K, M and N. Each chapter explains the approved document. Publication lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State and sample check lists. Building Regulations Explained will be of wide appeal to architects, planners, surveyors, builders, building control professionals (including new non-NHBC approved inspectors), regulators and students.

Download or read book Advanced Concrete Technology 2 written by John Newman and published by Elsevier. This book was released on 2003-10-31 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Institute of Concrete Technology's Advanced Concrete Technology Course, these four volumes are a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique series. Each volume deals with a different aspect of the subject: constituent materials, properties, processes and testing and quality. With worked examples, case studies and illustrations throughout, the books will be a key reference for the concrete specialist for years to come. - Expert international authorship ensures the series is authoritative - Case studies and worked examples help the reader apply their knowledge to practice - Comprehensive coverage of the subject gives the reader all the necessary reference material

Download or read book Historic Concrete written by James Sutherland and published by Thomas Telford. This book was released on with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Concrete Technology Set written by John Newman and published by Elsevier. This book was released on 2003-11-06 with total page 1647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Institute of Concrete Technology's advanced course, this new four volume series is a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique reference source. Each volume deals with different aspects of the properties, composition, uses and testing of concrete. With worked examples, case studies and illustrations throughout, this series will be a key reference for the concrete specialist for years to come. - Expert international authorship ensures the series is authoritative - Case studies and worked examples help the reader apply their knowledge to practice - Comprehensive coverage of the subject gives the reader all the necessary reference material

Download or read book Construction Materials written by Martin Preene and published by CRC Press. This book was released on 2001-08-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and updated, the third edition of this popular textbook continues to provide a comprehensive coverage of the main construction materials for undergraduate students of civil engineering and construction related courses. It creates an understanding of materials and how they perform through a knowledge of their chemical and physical

Download or read book Hot Deserts written by M. J. Walker and published by Geological Society of London. This book was released on 2012 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an authoritative and comprehensive state-of-the-art review of hot desert terrains in all parts of the world, their geomaterials and influence on civil engineering site investigation, design and construction. It primarily covers conditions and materials in modern hot deserts, but there is also coverage of unmodified ancient desert soils that exhibit engineering behaviour similar to modern desert materials. Thorough and up-to-date guidance on modern field evaluation and ground investigation techniques in hot arid areas is provided, including reference to a new approach to the desert model and detailed specialised assessments of the latest methods for materials characterisation and testing. The volume is based on world-wide experience in hot desert terrain and draws upon the knowledge and expertise of the members of a Geological Society Engineering Group Working Party comprising practising geologists, geomorphologists and civil engineers with a wealth of varied, but complementary experience of working in hot deserts. It is an essential reference book for professionals, as well as a valuable textbook for students. It is written in a style that is accessible to the non-specialist. A comprehensive glossary is also included. The Geological Society of London. Founded in 1807, the Geological Society of London is the oldest geological society in the world, and one of the largest publishers in the Earth sciences. The Society publishes a wide range of high-quality peer-reviewed titles for academics and professionals working in the geosciences, and enjoys an enviable international reputation for the quality of its work.

Download or read book Sustainable Construction Materials written by Ravindra K. Dhir OBE and published by Woodhead Publishing. This book was released on 2018-04-04 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth, in the series of five, on sustainable construction materials and like the previous three, it is also different to the norm. Its uniqueness lies in using the newly developed, Analytical Systemisation Method, in building the data-matrix sourced from 751 publications, contributed by 1402 authors from 513 institutions in 51 countries, from 1970 to 2017, on the subject of processed waste glass (glass cullet) as a construction material, and systematically analysing, evaluating and modelling this information for use of glass cullet as cement, aggregate or filler in concrete, ceramics, geotechnics and road pavement applications. Environmental issues, case studies and standards are also discussed. The work establishes what is already known and can be used to further progress the use of sustainable construction materials. It can also help to avoid repetitive research and save valuable resources. The book is structured in an incisive and easy to digest manner and is particularly suited for researchers, academics, design engineers, specifiers, contractors, and government bodies dealing with construction works. - Provides an extensive source of valuable database information, supported by an exhaustive list of globally-based published literature over the last 40-50 years - Offer an analysis, evaluation, repackaging and modeling of existing knowledge on sustainable construction practices - Provides a wealth of knowledge for use in many sectors relating to the construction profession