Download or read book Brushless Motors and Controllers written by Roland Büchi and published by BoD – Books on Demand. This book was released on 2012 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, brushless DC motors and controllers have begun an unparalleled triumph in model construction and in all technical fields. This book is intended to show how a brushless motor works. The basic principle is discussed first, before all the key terms such as kV and rpm/V, operating voltage, load and idle current, torque, turns, electrical and mechanical power, losses, efficiency, etc. are explained. A brushless motor can't work without a brushless controller, it requires a three-phase AC voltage. To increase the speed properly, the controller must have information on the rotor position. This can be done by Hall sensors or directly via the motor windings. All that will be taken into account in the book.

Download or read book Electric Motor Control written by Sang-Hoon Kim and published by Elsevier. This book was released on 2017-05-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Motor Control: DC, AC, and BLDC Motors introduces practical drive techniques of electric motors to enable stable and efficient control of many application systems, also covering basic principles of high-performance motor control techniques, driving methods, control theories and power converters. Electric motor drive systems play a critical role in home appliances, motor vehicles, robotics, aerospace and transportation, heating ventilating and cooling equipment’s, robotics, industrial machinery and other commercial applications. The book provides engineers with drive techniques that will help them develop motor drive system for their applications. Includes practical solutions and control techniques for industrial motor drive applications currently in use Contains MATLAB/Simulink simulation files Enables engineers to understand the applications and advantages of electric motor drive systems

Download or read book Permanent Magnet Brushless DC Motor Drives and Controls written by Chang-liang Xia and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced introduction to the simulation and hardware implementation of BLDC motor drives A thorough reference on the simulation and hardware implementation of BLDC motor drives, this book covers recent advances in the control of BLDC motor drives, including intelligent control, sensorless control, torque ripple reduction and hardware implementation. With the guidance of the expert author team, readers will understand the principle, modelling, design and control of BLDC motor drives. The advanced control methods and new achievements of BLDC motor drives, of interest to more advanced readers, are also presented. Focuses on the control of PM brushless DC motors, giving readers the foundations to the topic that they can build on through more advanced reading Systematically guides readers through the subject, introducing basic operational principles before moving on to advanced control algorithms and implementations Covers special issues, such as sensorless control, intelligent control, torque ripple reduction and hardware implementation, which also have applications to other types of motors Includes presentation files with lecture notes and Matlab 7 coding on a companion website for the book

Download or read book Speed Control of Sensorless Brushless DC Motor written by MD Sabbir Ahmed and published by . This book was released on 2018-11-22 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is all about running a brushless DC motor using a sensorless technique. The target of the work was to make a very simple operating method for a brushless motor and formulate a speed control mechanism. Initially the work was started with both considering back-EMF and without considering back-EMF. Because of more complexity in the back-EMF sensing method, and as our intention was to make a simpler and cost effective operation, so finally we assembled our project the without back-EMF sensing. Even though being a simple and inexpensive machine, the performance was quite good. However adding back-EMF sensing in this machine can give it more dependability.TABLE OF CONTENTS: DECLARATIONIAPPROVALIIACKNOWLEDGEMENTIIILIST OF FIGURESVIIABSTRACTIXCHAPTER 1INTRODUCTION101.1.Introduction101.2.Historical Background101.3.Advantage over Traditional Method111.4.Objective of this Work121.4.1.Primary objectives121.4.2.Secondary Objectives121.5.Introduction to this Thesis12CHAPTER 2BRUSHLESS DC MOTOR142.1.Introduction142.2.Comparison of Brushless motor with brushed motors152.3.Structure of a BLDC152.3.1.Stator162.3.2.Rotor172.4.Operating Principle182.4.1.Sensored Commutation192.4.2.Conventional Control Method Using Hall-effect Sensors202.4.3.Sensorless Control222.5.Applications232.6.Summary24CHAPTER 3MOTOR DRIVE SYSTEMS253.1.Introduction253.2.Components of Drive Electronics253.3.Inverter263.3.1.Three-Phase Inverter263.3.1.1.120-Degree Conduction273.3.1.2.180-Degree Conduction293.4.Speed Control Techniques303.4.1.Open Loop Speed Control313.4.2.Closed Loop Speed Control313.4.2.1.Proportional-Integral (PI) Controller323.5.PWM based Methods333.5.1.Conventional 120° PWM technique333.5.2.PWM Duty Cycle Calculation333.6.Summary34CHAPTER 4SIMULATION354.1.Introduction354.2.Simulation354.2.1.Simulating Three-Phase Inverter364.2.2.Simulating Controller Unit384.3.Simulation Results394.3.1.Speed Control404.4.Summary40CHAPTER 5HARDWARE IMPLEMENTATION415.1.Introduction415.2.Equipments and Components425.3.Power Supply Unit435.4.Microcontroller Unit445.5.Motor Drive Unit455.6.Performance of the System465.7.Summary47CHAPTER 6DISCUSSIONS AND CONCLUSIONS486.1.Discussions486.2.Suggestion for future Work496.2.1.Limitations496.2.2.Future Scope496.3.Conclusions50REFERENCES51APPENDIX A53SPEED CONTROL FLOWCHART53APPENDIX B54MICROCONTROLLER CODES54APPENDIX C55ATMEGA32 (MICROCONTROLLER)556.3.1.Pin Descriptions556.3.2.Block Diagram586.3.3.Electrical Characteristics59APPENDIX D60L298 (DUAL FULL-BRIDGE DRIVER)606.3.4.Pin Configurations606.3.5.Maximum Ratings61

Download or read book Electric Motors Control Techniques written by Irving M. Gottlieb and published by Tab Books. This book was released on 1994 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Brushless Motors and Controllers written by Roland Büchi and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Brushless Permanent magnet Motors written by J. R. Hendershot and published by Clarendon Press. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brushless permanent-magnet motors provide simple, low maintenance, and easily controlled mechanical power. Written by two leading experts on the subject, this book offers the most comprehensive guide to the design and performance of brushless permanent-magnetic motors ever written. Topics range from electrical and magnetic design to materials and control. Throughout, the authors stress both practical and theoretical aspects of the subject, and relate the material to modern software-based techniques for design and analysis. As new magnetic materials and digital power control techniques continue to widen the scope of the applicability of such motors, the need for an authoritative overview of the subject becomes ever more urgent. Design of Brushless Permanent-Magnet Motors fits the bill and will be read by students and researchers in electric and electronic engineering.

Download or read book Modeling and Adaptive Nonlinear Control of Electric Motors written by Farshad Khorrami and published by Springer Science & Business Media. This book was released on 2003-05-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, modeling and control design of electric motors, namely step motors, brushless DC motors and induction motors, are considered. The book focuses on recent advances on feedback control designs for various types of electric motors, with a slight emphasis on stepper motors. For this purpose, the authors explore modeling of these devices to the extent needed to provide a high-performance controller, but at the same time one amenable to model-based nonlinear designs. The control designs focus primarily on recent robust adaptive nonlinear controllers to attain high performance. It is shown that the adaptive robust nonlinear controller on its own achieves reasonably good performance without requiring the exact knowledge of motor parameters. While carefully tuned classical controllers often achieve required performance in many applications, it is hoped that the advocated robust and adaptive designs will lead to standard universal controllers with minimal need for fine tuning of control parameters.

Download or read book Controllers for Electric Motors written by Henry Duvall James and published by . This book was released on 1926 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Motors for Makers written by Matthew Scarpino and published by Que Publishing. This book was released on 2015-11-26 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Maker-Friendly Guide to Electric Motors! Makers can do amazing things with motors. Yes, they’re more complicated than some other circuit elements, but with this book, you can completely master them. Once you do, incredible new projects become possible. Unlike other books, Motors for Makers is 100% focused on what you can do. Not theory. Making. First, Matthew Scarpino explains how electric motors work and what you need to know about each major type: stepper, servo, induction, and linear motors. Next, he presents detailed instructions and working code for interfacing with and controlling servomotors with Arduino Mega, Raspberry Pi, and BeagleBone Black. All source code and design files are available for you to download from motorsformakers.com. From start to finish, you’ll learn through practical examples, crystal-clear explanations, and photos. If you’ve ever dreamed of what you could do with electric motors, stop dreaming...and start making! Understand why electric motors are so versatile and how they work Choose the right motor for any project Build the circuits needed to control each type of motor Program motor control with Arduino Mega, Raspberry Pi, or BeagleBone Black Use gearmotors to get the right amount of torque Use linear motors to improve speed and precision Design a fully functional electronic speed control (ESC) circuit Design your own quadcopter Discover how electric motors work in modern electric vehicles--with a fascinating inside look at Tesla’s patents for motor design and control!

Download or read book DC Motors Speed Controls Servo Systems written by Sam Stuart and published by Elsevier. This book was released on 2013-10-22 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC Motors - Speed Controls - Servo Systems: An Engineering Handbook is a seven-chapter text that covers the basic concept, principles, and applications of DC and speed motors and servo systems. After providing the terminology, symbols, and systems of units, this book goes on dealing with the basic theory, motor comparison, and basic speed control methods of motors. The subsequent chapters describe the phase-locked servo systems and their optimization and applications. These topics are followed by a discussion of the developments made by Electro-Craft in the field of DC Brushless Motors. The final chapter provides revised data sheets on Electro-Craft products and describes the models in the motomatic range of speed controls, servomotor controls, and digital positioning systems. This handbook is of great value to professional engineers and engineering students.

Download or read book Dynamics and Control of Electrical Drives written by Wach Piotr and published by Springer Science & Business Media. This book was released on 2011-04-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics is a science concerned with movement and changes. In the most general approach it relates to life processes as well as behavior in nature in rest. It governs small particles, technical objects, conversion of matter and materials but also concerns people, groups of people in their individual and, in particular, social dimension. In dynamics we always have to do with causes or stimuli for motion, the rules of reaction or behavior and its result in the form of trajectory of changes. This book is devoted to dynamics of a wide class of specific but very important objects such as electromechanical systems. This is a very rigorous discipline and has a long tradition, as its theoretical bases were formulated in the first half of the XIX century by d’ Alembert, Lagrange, Hamilton, Maxwell and other prominent scientists, but their crucial results were based on previous pioneering research of others such as Copernicus, Galileo, Newton... This book in its theoretical foundations is based on the principle of least action which governs classical as well as relativistic mechanics and electromagnetism and leads to Lagrange’s equations which are applied in the book as universal method to construct equations of motion of electromechanical systems. It gives common and coherent grounds to formulate mathematical models for all lumped parameters’ electromechanical systems, which are vital in our contemporary industry and civilized everyday life. From these remarks it seems that the book is general and theoretical but in fact it is a very practical one concerning modern electrical drives in a broad sense, including electromechanical energy conversion, induction motor drives, brushless DC drives with a permanent magnet excitation and switched reluctance machines (SRM). And of course their control, which means shaping of their trajectories of motion using modern tools, their designed autonomy in keeping a track according to our programmed expectations. The problems presented in the book are widely illustrated by characteristics, trajectories, dynamic courses all computed by use of developed simulation models throughout the book. There are some classical subjects and the history of the discipline is discussed but finally all modern tools and means are presented and applied. More detailed descriptions follow in abstracts for the particular chapters. The author hopes kind readers will enjoy and profit from reading this book.

Download or read book Power in Flux written by Ted Dillard and published by . This book was released on 2017-02-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.

Download or read book Electric Motors and Drives written by Austin Hughes and published by Elsevier. This book was released on 2013-10-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for non-specialist users of electric motors and drives, this book explains how electric drives work and compares the performance of the main systems, with many examples of applications. The author's approach - using a minimum of mathematics - has made this book equally popular as an outline for professionals and an introductory student text. * First edition (1990) has sold over 6000 copies. Drives and Controls on the first edition: 'This book is very readable, up-to-date and should be extremely useful to both users and o.e.m. designers. I unhesitatingly recommend it to any busy engineer who needs to make informed judgements about selecting the right drive system.' New features of the second edition: * New section on the cycloconverter drive. * More on switched relectance motor drives. * More on vector-controlled induction motor drives. * More on power switching devices. * New 'question and answer' sections on common problems and misconceptions. * Updating throughout. Electric Motors and Drives is for non-specialist users of electric motors and drives. It fills the gap between specialist textbooks (which are pitched at a level which is too academic for the average user) and the more prosaic 'handbooks' which are filled with useful detail but provide little opportunity for the development of any real insight or understanding. The book explores most of the widely-used modern types of motor and drive, including conventional and brushless d.c., induction motors (mains and inverter-fed), stepping motors, synchronous motors (mains and converter-fed) and reluctance motors.

Download or read book Design and Control of Electrical Motor Drives written by and published by . This book was released on 2021-12-09 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electric Motors and Control Systems written by Frank D. Petruzella and published by Ingram. This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has been written for a course of study that will introduce the reader to a broad range of motor types and control systems. It provides an overview of electric motor operation, selection, installation, control, and maintenance. Every effort has been made to present the most up-to-date information, reflecting the current needs of the industry"--