Download or read book Doherty Power Amplifiers written by Bumman Kim and published by Academic Press. This book was released on 2018-03-28 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doherty Power Amplifiers: From Fundamentals to Advanced Design Methods is a great resource for both RF and microwave engineers and graduate students who want to understand and implement the technology into future base station and mobile handset systems. The book introduces the very basic operational principles of the Doherty Amplifier and its non-ideal behaviors. The different transconductance requirements for carrier and peaking amplifiers, reactive element effect, and knee voltage effect are described. In addition, several methods to correct imperfections are introduced, such as uneven input drive, gate bias adaptation, dual input drive and the offset line technique. Advanced design methods of Doherty Amplifiers are also explained, including multistage/multiway Doherty power amplifiers which can enhance the efficiency of the amplification of a highly-modulated signal. Other covered topics include signal tracking operation which increases the dynamic range, highly efficient saturated amplifiers, and broadband amplifiers, amongst other comprehensive, related topics. - Specifically written on the Doherty Power Amplifier by the world's leading expert, providing an in-depth presentation of principles and design techniques - Includes detailed analysis on correcting non-ideal behaviors of Doherty Power Amplifiers - Presents advanced Doherty Power Amplifier architectures

Download or read book Broadband Communications Networks and Systems written by Victor Sucasas and published by Springer. This book was released on 2018-12-29 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 9th International Conference on Broadband Communications, Networks, and Systems, Broadnets 2018, which took place in Faro, Portugal, in September 2018. The 30 revised full and 16 workshop papers were carefully reviewed and selected from 68 submissions. The papers are thematically grouped as follows: Advanced Techniques for IoT and WSNs; SDN and Network Virtualization; eHealth and Telemedicine Mobile Applications; Security and Privacy Preservation; Communication Reliability and Protocols; Spatial Modulation Techniques; Hardware Implementation and Antenna Design.

Download or read book Switchmode RF and Microwave Power Amplifiers written by Andrei Grebennikov and published by Academic Press. This book was released on 2021-03-19 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switchmode RF and Microwave Power Amplifiers, Third Edition is an essential reference book on developing RF and microwave switchmode power amplifiers. The book combines theoretical discussions with practical examples, allowing readers to design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors, design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies with specified output power, also providing techniques on how to design multiband and broadband Doherty amplifiers using different bandwidth extension techniques and implementation technologies. This book provides the necessary information to understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements. It brings a unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems which offer major power consumption savings. - Provides a complete history of high-efficiency Class E and Class F techniques - Presents a new chapter on Class E with shunt capacitance and shunt filter to simplify the design of high-efficiency power amplifier with broader frequency bandwidths - Covers different Doherty architectures, including integrated and monolithic implementations, which are and will be, used in modern communication systems to save power consumption and to reduce size and costs - Includes extended coverage of multiband and broadband Doherty amplifiers with different frequency ranges and output powers using different bandwidth extension techniques - Balances theory with practical implementation, avoiding a cookbook approach and enabling engineers to develop better designs, including hybrid, integrated and monolithic implementations

Download or read book Advanced Techniques in RF Power Amplifier Design written by Steve C. Cripps and published by Artech House. This book was released on 2002 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much-anticipated volume builds on the author's best selling and classic work, RF Power Amplifiers for Wireless Communications (Artech House, 1999), offering experienced engineers a more in-depth understanding of the theory and design of RF power amplifiers. An invaluable reference tool for RF, digital and system level designers, the book includes discussions on the most critical topics for professionals in the field, including envelope power management schemes and linearization.

Download or read book 2020 50th European Microwave Conference EuMC written by IEEE Staff and published by . This book was released on 2021-01-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: microwaves

Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Download or read book Recent Technical Developments in Energy Efficient 5G Mobile Cells written by Raed A. Abd-Alhameed and published by MDPI. This book was released on 2020-06-17 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the true innovation in engineering design that may be promoted by blending together models and methodologies from different disciplines, and, in this book, the target was exactly to follow this approach to deliver a new disruptive architecture to deliver these next-generation mobile small cell technologies. According to this design philosophy, the work within this book resides in the intersection of engineering paradigms that includes “cooperation”, “network coding”, and “smart energy-aware frontends”. These technologies will not only be considered as individual building blocks, but re-engineered according to an inter-design approach resulting in the enabler for energy efficient femtocell-like services on the move. The book aims to narrow the gap between the current networking technologies and the foreseen requirements that are targeted at the future development of the 5G mobile and wireless communications networks in terms of the higher networking capacity, the ability to support more users, the lower cost per bit, the enhanced energy efficiency, and adaptability to new services and devices (for example, smart cities, and the Internet of things (IoT)).

Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Download or read book RF and Microwave Power Amplifier Design written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2004-09-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.

Download or read book Proceedings of SIE 2022 written by Giuseppe Cocorullo and published by Springer Nature. This book was released on 2023-02-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases the state of the art in the field of electronics, as presented by researchers and engineers at the 53rd Annual Meeting of the Italian Electronics Society (SIE), held in Rende (CS), Italy, on September 5-7, 2022. It covers a broad range of aspects, including: integrated circuits and systems, micro- and nano-electronic devices, microwave electronics, sensors and microsystems, optoelectronics and photonics, power electronics, electronic systems and applications.

Download or read book Microwave Wireless Communications written by Antonio Raffo and published by Academic Press. This book was released on 2016-03-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: To design and develop fast and effective microwave wireless systems today involves addressing the three different 'levels': Device, circuit, and system. This book presents the links and interactions between the three different levels rather than providing just a comprehensive coverage of one specific level. With the aim of overcoming the sectional knowledge of microwave engineers, this will be the first book focused on explaining how the three different levels interact by taking the reader on a journey through the different levels going from the theoretical background to the practical applications. - Explains the links and interactions between the three different design levels of wireless communication transmitters: device, circuit, and system - Presents state-of-the-art, challenges, and future trends in the field of wireless communication systems - Covers all aspects of both mature and cutting-edge technologies for semiconductor devices for wireless communication applications - Many circuit designs outlining the limitations derived from the available transistor technologies and system requirements - Explains how new microwave measurement techniques can represent an essential tool for microwave modellers and designers

Download or read book Microwave Electronics written by Giovanni Ghione and published by Cambridge University Press. This book was released on 2018 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained guide to microwave electronics, covering passive and active components, linear, low-noise and power amplifiers, microwave measurements, and CAD techniques. It is the ideal text for graduate and senior undergraduate students taking courses in microwave and radio-frequency electronics, as well as professional microwave engineers.

Download or read book New Materials and Devices Enabling 5G Applications and Beyond written by Nadine Collaert and published by Elsevier. This book was released on 2024-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials and Devices for 5G Applications and Beyond focuses on the materials, device architectures and enabling integration schemes for 5G applications and emerging technologies. It gives a comprehensive overview of the trade-offs, challenges and unique properties of novel upcoming technologies. Starting from the application side and its requirements, the book examines different technologies under consideration for the different functions, both more conventional to exploratory, and within this context the book provides guidance to the reader on how to possibly optimize the system for a particular application. This book aims at guiding the reader through the technologies required to enable 5G applications, with the main focus on mm-wave frequencies, up to THz. New Materials and Devises for 5G Applications and Beyond is suitable for industrial researchers and development engineers, and researchers in materials science, device engineering and circuit design. - Reviews challenges and emerging opportunities for materials, devices, and integration to enable 5G technologies - Includes discussion of technologies such as RF-MEMs, RF FINFETs, and transistors based on current and emerging materials (InP, GaN, etc.) - Focuses on mm-wave frequencies up to the terahertz regime

Download or read book Millimeter Wave Power Amplifiers written by Jaco du Preez and published by Springer. This book was released on 2017-10-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed review of millimeter-wave power amplifiers, discussing design issues and performance limitations commonly encountered in light of the latest research. Power amplifiers, which are able to provide high levels of output power and linearity while being easily integrated with surrounding circuitry, are a crucial component in wireless microwave systems. The book is divided into three parts, the first of which introduces readers to mm-wave wireless systems and power amplifiers. In turn, the second focuses on design principles and EDA concepts, while the third discusses future trends in power amplifier research. The book provides essential information on mm-wave power amplifier theory, as well as the implementation options and technologies involved in their effective design, equipping researchers, circuit designers and practicing engineers to design, model, analyze, test and implement high-performance, spectrally clean and energy-efficient mm-wave systems.

Download or read book RF Power Amplifiers for Wireless Communications written by Steve C. Cripps and published by Artech House Publishers. This book was released on 2006-01-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised edition offers a comprehensive, practical, up-to-date understanding of how to tackle a power amplifier design with confidence and quickly determine the cause of malfunctioning hardware.

Download or read book Dynamic Power Supply Transmitters written by Earl McCune and published by Cambridge University Press. This book was released on 2015-05-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Power is dissipated (lost) when this current flows through any resistance, which includes the amplifier's transistor. This dissipated power is the product of the current in the load times the voltage difference between the supply voltage to the amplifier and the output signal voltage. When the voltage supplied to the amplifier is a constant value, and by far the most common design practice, the situation in Fig. 1-2a results. Power dissipation in the amplifier is maximum when the output signal voltage is 1/2 of the supply voltage. When the output signal voltage is higher, even though the current value is larger the voltage drop is less and the power dissipation is lower. Similarly, when the output signal voltage is small, even though the voltage drop is now large the current in the load is smaller and again the power dissipation is lower"--