Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2009-04-15 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design,

Download or read book Behaviour and Design of Steel Structures to BS 5950 written by Mark A Bradford and published by CRC Press. This book was released on 2002-12-24 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this successful textbook is concerned specifically with the design of steel structures to the British Standard BS 5950. Thoroughly revised and updated in accordance with the latest 2000 amendment to Part 1 of the standard, it discusses all aspects of the behaviour of steel structures, and criteria used in their design. With copious worked examples, The Behaviour and Design of Steel Structures to BS 5950 is an ideal course textbook for senior undergraduate students, and will also provide a useful reference source for the practising engineer.

Download or read book Design of Structural Elements written by C. Arya and published by CRC Press. This book was released on 2018-10-08 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the design of structural elements by considering the design of beams, columns, slabs etc in concrete, steel, timber and masonry. It is fully up to date with British standards and codes and includes a special

Download or read book Structural Engineer s Pocket Book British Standards Edition written by Fiona Cobb and published by CRC Press. This book was released on 2020-12-17 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: * British Standards Edition, as a companion to the more recent Eurocode third edition *Time-saving, affordable, first-point-of-reference for structural and civil engineers * Brings together data from many sources into a compact, easy-to-use format * On-the-job rules of thumb to design specifications

Download or read book Structural Elements Design Manual written by Trevor Draycott and published by Routledge. This book was released on 1990 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives clear explanations of the logical design sequence for structural elements. The Structural Engineer says: `The book explains, in simple terms, and with many examples, Code of Practice methods for sizing structural sections in timber, concrete, masonry and steel. It is the combination into one book of section sizing methods in each of these materials that makes this text so useful....Students will find this an essential support text to the Codes of Practice in their study of element sizing'.

Download or read book Steel Structures written by Hassan Al Nageim and published by CRC Press. This book was released on 2017-12-21 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this popular book now contains references to both Eurocodes and British Standards, as well as new and revised examples, and sections on sustainability, composite columns and local buckling. Initial chapters cover the essentials of structural engineering and structural steel design, whilst the remainder of the book is dedicated to a detailed examination of the analysis and design of selected types of structures, presenting complex designs in an understandable and user-friendly way. These structures include a range of single and multi-storey buildings, floor systems and wide-span buildings. Emphasis is placed on practical design with a view to helping undergraduate students and newly qualified engineers bridge the gap between academic study and work in the design office. Experienced engineers who need a refresher course on up-to-date methods of design and analysis will also find the book useful.

Download or read book Building Regulations Explained written by London District Surveyors Association and published by Routledge. This book was released on 2003-09-02 with total page 1611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised essential reference takes into account all important aspects of building control, including new legislation up to Spring 2000 with important revisions to parts B, K, M and N. Each chapter explains the approved document. Publication lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State and sample check lists. Building Regulations Explained will be of wide appeal to architects, planners, surveyors, builders, building control professionals (including new non-NHBC approved inspectors), regulators and students.

Download or read book Optimization Techniques And Applications International Conference In 2 Volumes written by F S Chou and published by World Scientific. This book was released on 1992-05-25 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of powerful computers and novel mathematical programming techniques, the multidisciplinary field of optimization has advanced to the stage that quite complicated systems can be addressed. The conference was organized to provide a platform for the exchanging of new ideas and information and for identifying areas for future research. The contributions covered both theoretical techniques and a rich variety of case studies to which optimization can be usefully applied.

Download or read book The Building Acts and Regulations Applied written by C.M.H. Barritt and published by Routledge. This book was released on 2014-06-11 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms part of a unique, highly practical and time-saving three volume presentation of the Building Regulations, each book covering all the regulations relating to specific building usage. The chapters of each volume form self-contained units covering all the Regulation requirements applicable to a particular part of a building; thus the reader can ensure that all the Regulations are fully met. Also included is a digest of published standards, guides and technical information as well as reviews of the new Eurocodes currently being introduced. The Building Acts and Regulations Applied: Buildings for Public Assembly and Residential Use covers all the regulations relating to buildings used for public assembly or residential purposes (other than houses and flats), such as theatres, sports stadia, hotels, prisons and halls of residence. It is a useful course companion for BTEC HNC/D and degree courses in building, architecture, surveying, estate management and other built environment disciplines. It is also an ideal reference source for all professionals working in these areas.

Download or read book Metric Handbook written by Pamela Buxton and published by Routledge. This book was released on 2015-03-05 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly updated in reference to the latest construction standards and evolving building types Many chapters revised including housing, transport, offices, libraries and hotels New chapter on flood-aware design Sustainable design integrated into chapters throughout Over 100,000 copies sold to successive generations of architects and designers - this book belongs in every design studio and architecture school library The Metric Handbook is the major handbook of planning and design information for architects and architecture students. Covering basic design data for all the major building types, it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as building types, the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook provides an invaluable resource for solving everyday design and planning problems.

Download or read book Analysis Design and Construction of Braced Barrel Vaults written by Z.S. Makowski and published by CRC Press. This book was released on 1986-10-31 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of 24 articles covers a range of topics in the analysis, design and construction of braced barrel vaults.

Download or read book Structural Steelwork written by A.B. Clarke and published by CRC Press. This book was released on 2023-06-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference which provides the student and the engineer with in-depth guidance on design methods to the UK code of practice for structural steelwork, BS 5950. The design procedures are presented in a series of well-defined steps illustrated with worked examples.

Download or read book Structural Appraisal of Iron Framed Textile Mills written by Tom Swailes and published by Thomas Telford. This book was released on 1998-04-09 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide begins with an overview of mill building structures and their development, illustrated with examples of mill construction details. It then discusses measures that may be needed to ensure compliance with modern Building Regulations. The constructional features and structural problems found in textile mills are considered in detail.

Download or read book Steel Designers Manual written by SCI (Steel Construction Institute) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).

Download or read book PRO 40 International RILEM Conference on the Use of Recycled Materials in Buildings and Structures Volume 2 written by Enric Vázquez and published by RILEM Publications. This book was released on 2004 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plant Engineer s Reference Book written by DENNIS A SNOW and published by Elsevier. This book was released on 2001-12-17 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: A plant engineer is responsible for a wide range of industrial activities, and may work in any industry. The Plant Engineer's Reference Book 2nd Edition is a reference work designed to provide a primary source of information for the plant engineer. Subjects include the selection of a suitable site for a factory and provision of basic facilities, including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes. Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. The editor, Dennis Snow, has experience of a wide range of operations in the UK, Europe, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, the Plant Engineer's Reference Book, 2nd Edition provides complete coverage of the information needed by plant engineers in any industry worldwide. - Wide range of information will prove to be use to engineers in any industry - Covers all the topics necessary to design and develop an engineering plant - Will help engineers in industry deal with practical problems in a variety of situations

Download or read book Civil Engineer s Reference Book written by L S Blake and published by CRC Press. This book was released on 1994-03-21 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications. A particular feature is the incorporation of chapters on construction and site practice, including contract management and control.