Download or read book Urban Heat Stress and Mitigation Solutions written by Vincenzo Costanzo and published by Taylor & Francis. This book was released on 2021-09-08 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with an understanding of the impact that different morphologies, construction materials and green coverage solutions have on the urban microclimate, thus affecting the comfort conditions of urban inhabitants and the energy needs of buildings in urban areas. The book covers the latest approaches to energy and outdoor comfort measurement and modelling on an urban scale, and describes possible measures and strategies to mitigate the effects of the mutual interaction between urban settlements and local microclimate. Despite its relevance, only limited literature is currently devoted to appraising—from an engineering perspective—the intertwining relationships between urban geometry and fabrics, energy fluxes between buildings and their surroundings, outdoor microclimate conditions and building energy demands in urban areas. This book fills this gap by first discussing the physical processes that govern heat and mass transfer at an urban scale, while emphasizing the role played by different spatial arrangements, manmade materials and green infrastructures on the outdoor microclimate. The first chapters also address the implications of these factors on the outdoor comfort conditions experienced by pedestrians, and on the buildings’ energy demand for space heating and cooling. Then, based upon cutting-edge experimental activities and simulation work, this book demonstrates current and forthcoming adaptation and mitigation strategies to improve the urban microclimate and its impact on the built environment, such as cool materials, thermochromic and retroreflective finishing materials, and green infrastructures applied either at a building scale or at the urban scale. The effect of these solutions is demonstrated for different cities worldwide under a range of climate conditions. Finally, the book opens a wider perspective by introducing the basic elements that allow fuel poverty, raw materials consumption, and the principles of circular economy in the definition of a resilient urban settlement.
Download or read book Urban Retrofitting for Sustainability written by Tim Dixon and published by Routledge. This book was released on 2014-01-21 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a foreword from Paul King, Chief Executive, UK Green Building Council and Chairman, Zero Carbon Hub As concerns over climate change and resource constraints grow, many cities across the world are trying to achieve a low carbon transition. Although new zero carbon buildings are an important part of the story, in existing cities the transformation of the current building stock and urban infrastructure must inevitably form the main focus for transitioning to a low carbon and sustainable future by 2050. Urban Retrofitting for Sustainability brings together interdisciplinary research contributions from leading international experts to focus on key issues such as systems innovation, financing tools, governance, energy, and water management. The chapters consider not only the knowledge and technical tools available, but looks forward to how they can be implemented in real cities by 2050.
Download or read book Dimensions of the Sustainable City written by Mike Jenks and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CityForm consortium’s latest book, Dimensions of the Sustainable City, is the first book to report on an empirical multi-disciplinary study specifically designed to address urban sustainability. Drawing together the various dimensions of sustainability – economic, social, transport, energy and ecological – the book examines their relationships both to each other and to urban form. The book investigates the sustainability dimensions of cities through a series of projects based on a common list of elements of urban form, and which draw on the consortium’s latest research to review the sustainability issues of each dimension. The elements of urban form include density, land use, location, accessibility, transport infrastructure and characteristics of the built environment. The book also addresses issues such as adapting cities, psychological and ecological benefits of green space and sustainable lifestyles, each presenting a critical review of the relevant literature followed by an empirical analysis presenting the key results. Based on studies across five UK cities, the book draws out findings of relevance to sustainable cities worldwide. As well as an invaluable reference to researchers in sustainable planning and urban design, the book will provide a useful text for advanced undergraduate and graduate courses and for policy makers dealing with these issues. The CityForm consortium is a multi-disciplinary group of researchers from five universities funded by the UK Engineering and Physical Science Research Council from 2003-07.
Download or read book British National Bibliography for Report Literature written by and published by . This book was released on 2003-02 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Living in a Low Carbon Society in 2050 written by H. Herring and published by Springer. This book was released on 2012-08-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining theory, case studies and speculative fiction, a range of contributors, from leading UK academics to pioneering renewable activists, create a compelling picture of the potential perks and pitfalls of a low carbon future.
Download or read book Bredem 12 Model Description 2001 Update written by B. R. Anderson and published by Bre Press. This book was released on 2010-11 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes the technical basis of BREDEM-12, the current annual version of the BRE Domestic Energy Model, including 2001 updates. This model estimates energy consumption in dwellings, including estimates for space heating, water heating, cooking, lights and appliances. The principles behind the model are discussed and the equations are listed. Sufficient information to implement the model is given.
Download or read book Fixing Fuel Poverty written by Brenda Boardman and published by Routledge. This book was released on 2013-05-13 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its publication in the early 90s, Brenda Boardman's Fuel Poverty has been the reference text for those wishing to learn about this complex subject. In this, its successor, she turns a critical eye to the new millennium and finds that the situation, while now more widely recognised, is far from having improved. The book begins by discussing the political awakening to the issue and exploring just who constitutes the fuel poor. It examines the factors that contribute to fuel poverty - low incomes, high fuel prices and poor quality housing - and looks at and evaluates the policies that have been employed to help reduce the problem. The latter part presents a detailed set of proposals based around long-term improvements in the housing stock that must be employed if we are to avoid a dire situation continuing to get worse. Based on detailed analysis of the situation in the UK, the growth of fuel poverty (sometimes called energy poverty) in other countries and the new focus in European policy makes the book timely and provides important lessons for those who now have to produce policies to tackle the issues.
Download or read book Urban Energy Transition written by Peter Droege and published by Elsevier. This book was released on 2011-09-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium of 29 chapters from 18 countries contains both fundamental and advanced insight into the inevitable shift from cities dominated by the fossil-fuel systems of the industrial age to a renewable-energy based urban development framework. The cross-disciplinary handbook covers a range of diverse yet relevant topics, including: carbon emissions policy and practice; the role of embodied energy; urban thermal performance planning; building efficiency services; energy poverty alleviation efforts; renewable community support networks; aspects of household level bio-fuel markets; urban renewable energy legislation, programs and incentives; innovations in individual transport systems; global urban mobility trends; implications of intelligent energy networks and distributed energy supply and storage; and the case for new regional monetary systems and lifestyles. Presented are practical and principled aspects of technology, economics, design, culture and society, presenting perspectives that are both local and international in scope and relevance.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2001 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency in Domestic Appliances and Lighting written by Paolo Bertoldi and published by Springer. This book was released on 2023-05-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains peer-reviewed papers presented at the 10th International Conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL'19), held in Jinan, China from 6-8 November 2019. Energy efficiency helps to mitigate CO2 emissions and at the same time increases the security of energy supply. Energy efficiency is recognized as the cleanest, quickest and cheapest energy source. Not only this, but energy efficiency brings several additional benefits for society and end-users, such as lower energy costs, reduced local pollution, better outdoor and indoor air quality, etc. However, in some sectors, such as the residential sector, barriers to investments in energy efficiency remain. Legislation adopted in several jurisdictions (EU, Japan, USA, China, India, Australia, Brazil, etc.) helps in removing barriers and fosters investments in energy efficiency. These initiatives complement innovative financing schemes for energy efficiency, the provision of energy services by energy service companies and different types of information programs. At the same time, progress in appliance technologies and in solid state lighting offer high levels of efficiency. LED lighting is an example. As with previous conferences in this series, EEDAL’19 provided a unique forum to discuss and debate the latest developments in energy and environmental impact of households, including appliances, lighting, heating and cooling equipment, electronics, smart meters, consumer behavior, and policies and programs. EEDAL addressed non-technical issues such as consumer behavior, energy access in developing countries, and demand response.
Download or read book Introduction to Architectural Science written by Steven V. Szokolay and published by Routledge. This book was released on 2014-04-11 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this book provides the ideal and only reference to the physical basis of architectural design. Fully updated and expanded throughout, the book provides the data required for architects to design buildings that will maintain the users comfort in a variety of conditions, with minimal reliance on energy intensive methods like air conditioning. This is not a ‘how to’ book but answers the question why. It equips the reader with the tools to realize the full potential of the good intentions of sustainable, bioclimatic design. All sections have been revised and updated for this third edition including all the most relevant developments affecting heat, light and sound controls. The book responds to the need of understanding beyond ‘rules of thumb’.
Download or read book The R Book written by Michael J. Crawley and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high-level language of R is recognized as one of the mostpowerful and flexible statistical software environments, and israpidly becoming the standard setting for quantitative analysis,statistics and graphics. R provides free access to unrivalledcoverage and cutting-edge applications, enabling the user to applynumerous statistical methods ranging from simple regression to timeseries or multivariate analysis. Building on the success of the author’s bestsellingStatistics: An Introduction using R, The R Book ispacked with worked examples, providing an all inclusive guide to R,ideal for novice and more accomplished users alike. The bookassumes no background in statistics or computing and introduces theadvantages of the R environment, detailing its applications in awide range of disciplines. Provides the first comprehensive reference manual for the Rlanguage, including practical guidance and full coverage of thegraphics facilities. Introduces all the statistical models covered by R, beginningwith simple classical tests such as chi-square and t-test. Proceeds to examine more advance methods, from regression andanalysis of variance, through to generalized linear models,generalized mixed models, time series, spatial statistics,multivariate statistics and much more. The R Book is aimed at undergraduates, postgraduates andprofessionals in science, engineering and medicine. It is alsoideal for students and professionals in statistics, economics,geography and the social sciences.
Download or read book Building Regulations Explained written by John Stephenson and published by Taylor & Francis. This book was released on 2001 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised essential reference takes into account all important aspects of building control, including new legislation up to Spring 2000 with important revisions to parts B, K, M and N. Each chapter explains the approved document. Publication lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State and sample check lists. Building Regulations Explained will be of wide appeal to architects, planners, surveyors, builders, building control professionals (including new non-NHBC approved inspectors), regulators and students.
Download or read book Integrated Spatial and Energy Planning written by Gernot Stoeglehner and published by Springer. This book was released on 2016-04-02 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spatial planning – an important determinant of energy saving and renewable energy supply. Revealing the key driving forces for spatial development supporting the shift towards energy efficiency and renewable energy supplies, it shows the importance of integrated spatial and energy planning approaches for a timely and sustainable change of energy systems, thus supporting policies of climate protection. As operating within the context of renewable energy sources is becoming a major policy issue at the international, European and national level, spatial dimensions of renewable energy systems as well as challenges, barriers and opportunities in different spatial contexts become more important. This book analyses not only the fundamental system interrelations between resources, technologies and consumption patterns with respect to energy, but also the links to the spatial context, and provides guidelines for researchers as well as practitioners in this new, emerging field. It presents innovative analytical tools to solve real-world problems and discusses the most important fields of action in integrated spatial and energy planning including planning contents, planning visions and principles as well as planning process design and planning methodology.
Download or read book A Handbook of Sustainable Building Design and Engineering written by Dejan Mumovic and published by Routledge. This book was released on 2013-06-17 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined challenges of health, comfort, climate change and energy security cross the boundaries of traditional building disciplines. This authoritative collection, focusing mostly on energy and ventilation, provides the current and next generation of building engineering professionals with what they need to work closely with many disciplines to meet these challenges. A Handbook of Sustainable Building Engineering covers: how to design, engineer and monitor a building in a manner that minimises the emissions of greenhouse gases; how to adapt the environment, fabric and services of existing and new buildings to climate change; how to improve the environment in and around buildings to provide better health, comfort, security and productivity; and provides crucial expertise on monitoring the performance of buildings once they are occupied. The authors explain the principles behind built environment engineering, and offer practical guidance through international case studies.
Download or read book Optimal Design and Retrofit of Energy Efficient Buildings Communities and Urban Centers written by Moncef Krarti and published by Butterworth-Heinemann. This book was released on 2018-03-27 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Design and Retrofit of Energy Efficient Buildings, Communities, and Urban Centers presents current techniques and technologies for energy efficiency in buildings. Cases introduce and demonstrate applications in both the design of new buildings and retrofit of existing structures. The book begins with an introduction that includes energy consumption statistics, building energy efficiency codes, and standards and labels from around the world. It then highlights the need for integrated and comprehensive energy analysis approaches. Subsequent sections present an overview of advanced energy efficiency technologies for buildings, including dynamic insulation materials, phase change materials, LED lighting and daylight controls, Life Cycle Analysis, and more. This book provides researchers and professionals with a coherent set of tools and techniques for enhancing energy efficiency in new and existing buildings. The case studies presented help practitioners implement the techniques and technologies in their own projects. - Introduces a holistic analysis approach to energy efficiency for buildings using the concept of energy productivity - Provides coverage of individual buildings, communities and urban centers - Includes both the design of new buildings and retrofitting of existing structures to improve energy efficiency - Describes state-of-the-art energy efficiency technologies - Presents several cases studies and examples that illustrate the analysis techniques and impact of energy efficiency technologies and controls
Download or read book BREDEM 8 written by B.R. Anderson and published by Bre Press. This book was released on 2010-11 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document describes the technical basis of BREDEM-8, the current monthly version of the BRE Domestic Energy Model. This model estimates energy consumption in dwellings, including estimates for space heating, water heating, cooking, lights and appliances. The principles behind the model are discussed and the equations are listed. Sufficient information to implement the model is given. 2001 update, with corrections.
