Download or read book The Electrical Engineering Handbook written by Wai Kai Chen and published by Elsevier. This book was released on 2004-11-16 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electrical Engineer's Handbook is an invaluable reference source for all practicing electrical engineers and students. Encompassing 79 chapters, this book is intended to enlighten and refresh knowledge of the practicing engineer or to help educate engineering students. This text will most likely be the engineer's first choice in looking for a solution; extensive, complete references to other sources are provided throughout. No other book has the breadth and depth of coverage available here. This is a must-have for all practitioners and students! The Electrical Engineer's Handbook provides the most up-to-date information in: Circuits and Networks, Electric Power Systems, Electronics, Computer-Aided Design and Optimization, VLSI Systems, Signal Processing, Digital Systems and Computer Engineering, Digital Communication and Communication Networks, Electromagnetics and Control and Systems.About the Editor-in-Chief...Wai-Kai Chen is Professor and Head Emeritus of the Department of Electrical Engineering and Computer Science at the University of Illinois at Chicago. He has extensive experience in education and industry and is very active professionally in the fields of circuits and systems. He was Editor-in-Chief of the IEEE Transactions on Circuits and Systems, Series I and II, President of the IEEE Circuits and Systems Society and is the Founding Editor and Editor-in-Chief of the Journal of Circuits, Systems and Computers. He is the recipient of the Golden Jubilee Medal, the Education Award, and the Meritorious Service Award from the IEEE Circuits and Systems Society, and the Third Millennium Medal from the IEEE. Professor Chen is a fellow of the IEEE and the American Association for the Advancement of Science.* 77 chapters encompass the entire field of electrical engineering.* THOUSANDS of valuable figures, tables, formulas, and definitions.* Extensive bibliographic references.

Download or read book Electrical Engineer s Reference Book written by M. A. Laughton and published by Newnes. This book was released on 2002-09-27 with total page 1519 pages. Available in PDF, EPUB and Kindle. Book excerpt: For ease of use, this edition has been divided into the following subject sections: general principles; materials and processes; control, power electronics and drives; environment; power generation; transmission and distribution; power systems; sectors of electricity use.New chapters and major revisions include: industrial instrumentation; digital control systems; programmable controllers; electronic power conversion; environmental control; hazardous area technology; electromagnetic compatibility; alternative energy sources; alternating current generators; electromagnetic transients; power system planning; reactive power plant and FACTS controllers; electricity economics and trading; power quality.*An essential source of techniques, data and principles for all practising electrical engineers*Written by an international team of experts from engineering companies and universities*Includes a major new section on control systems, PLCs and microprocessors

Download or read book Fundamentals of Power Semiconductor Devices written by B. Jayant Baliga and published by Springer Science & Business Media. This book was released on 2010-04-02 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Semiconductor Devices provides an in-depth treatment of the physics of operation of power semiconductor devices that are commonly used by the power electronics industry. Analytical models for explaining the operation of all power semiconductor devices are shown. The treatment here focuses on silicon devices but includes the unique attributes and design requirements for emerging silicon carbide devices. The book will appeal to practicing engineers in the power semiconductor device community.

Download or read book High Voltage Insulation Engineering written by Ravindra Arora and published by New Age International. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Covers In Detail The Behaviour Of Gaseous, Liquid And Solid Dielectrics, Including Vacuum, In Electric Fields Present In High Voltage Power Systems. Insulating Materials Are Classified According To Their Sources, Production And Applications Before Describing Their Dielectric Properties. Their Performance Under Dc, Ac And Impulse Voltages Is Described For All The Three Configurations Of Fields Defined As Uniform, Weakly Nonuniform Andextremelynonuniform.Analytical And Computational Methods Of Electric Stress Estimation In The Dielectrics As Well As Stress Control And Optimization Techniques Are Alsocovered. While Describing The Breakdown Strengths, A Distinction Is Made Between Intrinsic And Practical Strengths Of The Dielectrics. Factors Which Influence The Breakdown Have Been Emphasized. Efforts Have Been Made In Selecting Actual Measured Characteristics From The Vast Number Of Literature Referred. A Reader Would Find It Of Practical Importance.Contents Of The Book Have Been Evolved From The Graduate Level Courses Developed For The Curricula At Technische Universitat Dresden, Germany And Indian Institute Of Technology Kanpur, India. These Should Also Be Useful And Of Sufficient Interest To Engineers From Utilities And Industries Dealing With High Voltage Insulation, Besides Those Involved In Research.

Download or read book Electrical Degradation and Breakdown in Polymers written by Len A. Dissado and published by IET. This book was released on 1992 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is in five parts: Part I introduces the physical and chemical structure of polymers and their breakdown; Part II reviews electrical degradation in polymers, and Part III reviews conduction and deterministic breakdown in solids. Part IV discusses the stochastic nature of break-down from empirical and modelling viewpoints, and Part V indicates practical implications and strategies for engineers. Much of the discussion applies to non-crystalline materials generally.

Download or read book High Voltage Engineering written by Mazen Abdel-Salam and published by CRC Press. This book was released on 2000-08-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Bridges the gap between laboratory research and practical applications in industry and power utilities-clearly organized into three distinct sections that cover basic theories and concepts, execution of principles, and innovative new techniques. Includes new chapters detailing industrial uses and isues of hazard and safety, and review excercises to accompany each chpter."

Download or read book Electrical Insulation in Power Systems written by Malik and published by CRC Press. This book was released on 2018-02-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the design, operations, diagnostics and testing of electrical insulation in high-voltage power networks. The book presents the fundamental properties of dielectrics essential for the optimum design of power systems. It provides a survey of advanced digital and electro-optic techniques used in both the field and research.

Download or read book Microelectronics Failure Analysis written by and published by ASM International. This book was released on 2004-01-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: For newcomers cast into the waters to sink or swim as well as seasoned professionals who want authoritative guidance desk-side, this hefty volume updates the previous (1999) edition. It contains the work of expert contributors who rallied to the job in response to a committee's call for help (the committee was assigned to the update by the Electron

Download or read book ESD written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growth of high-speed telecommunications and wireless technology, it is becoming increasingly important for engineers to understand radio frequency (RF) applications and their sensitivity to electrostatic discharge (ESD) phenomena. This enables the development of ESD design methods for RF technology, leading to increased protection against electrical overstress (EOS) and ESD. ESD: RF Technology and Circuits: Presents methods for co-synthesizisng ESD networks for RF applications to achieve improved performance and ESD protection of semiconductor chips; discusses RF ESD design methods of capacitance load transformation, matching network co-synthesis, capacitance shunts, inductive shunts, impedance isolation, load cancellation methods, distributed loads, emitter degeneration, buffering and ballasting; examines ESD protection and design of active and passive elements in RF complementary metal-oxide-semiconductor (CMOS), RF laterally-diffused metal oxide semiconductor (LDMOS), RF BiCMOS Silicon Germanium (SiGe), RF BiCMOS Silicon Germanium Carbon (SiGeC), and Gallim Arsenide technology; gives information on RF ESD testing methodologies, RF degradation effects, and failure mechanisms for devices, circuits and systems; highlights RF ESD mixed-signal design integration of digital, analog and RF circuitry; sets out examples of RF ESD design computer aided design methodologies; covers state-of-the-art RF ESD input circuits, as well as voltage-triggered to RC-triggered ESD power clamps networks in RF technologies, as well as off-chip protection concepts. Following the authors series of books on ESD, this book will be a thorough overview of ESD in RF technology for RF semiconductor chip and ESD engineers. Device and circuit engineers working in the RF domain, and quality, reliability and failure analysis engineers will also find it a valuable reference in the rapidly growing are of RF ESD design. In addition, it will appeal to graduate students in RF microwave technology and RF circuit design.

Download or read book Gaseous Dielectrics written by Loucas G. Christophorou and published by Elsevier. This book was released on 2013-09-11 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gaseous Dielectrics V presents the proceedings of the Fifth International Symposium on Gaseous Dielectrics, held in Knoxville, Tennessee on May 3–7, 1987. This book discusses the effective coupling between basic and applied research and technology achieved in this area. Organized into 12 chapters, this book begins with an overview of the status of theoretical calculations of excitation and ionization coefficients for electrons. This text then provides an extensive investigation into different phases of discharge development in electronegative gases. Other chapters consider the use of sulfur hexafluoride as a dielectric medium in rail systems and gas circuit breakers. This book reviews as well the primary requirements for a successful gas analysis program, with emphasis on measurement and interpretation methods. The final chapter deals with the progress in dielectric quality assurance of gas insulated substations (GIS), which has resulted from improved scientific knowledge of significant phenomena. This book is a valuable resource for electrical and electronics engineers.

Download or read book Intelligent and Efficient Electrical Systems written by M.C. Bhuvaneswari and published by Springer. This book was released on 2017-12-21 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from International Conference on Intelligent and Efficient Electrical Systems (ICIEES’17). The volume brings together content from both industry and academia. The book focuses on energy efficiency in electrical systems and covers en trende topics such as control of renewable energy systems. The collaborative industry-academia perspective of the conference ensures that equal emphasis is laid on novel topics and practical applications. The contents of this volume will prove useful to researchers and practicing engineers alike.

Download or read book High Voltage Devices and Circuits in Standard CMOS Technologies written by Hussein Ballan and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard voltages used in today's ICs may vary from about 1.3V to more than 100V, depending on the technology and the application. High voltage is therefore a relative notion. High Voltage Devices and Circuits in Standard CMOS Technologies is mainly focused on standard CMOS technologies, where high voltage (HV) is defined as any voltage higher than the nominal (low) voltage, i.e. 5V, 3.3V, or even lower. In this standard CMOS environment, IC designers are more and more frequently confronted with HV problems, particularly at the I/O level of the circuit. In the first group of applications, a large range of industrial or consumer circuits either require HV driving capabilities, or are supposed to work in a high-voltage environment. This includes ultrasonic drivers, flat panel displays, robotics, automotive, etc. On the other hand, in the emerging field of integrated microsystems, MEMS actuators mainly make use of electrostatic forces involving voltages in the typical range of 30 to 60V. Last but not least, with the advent of deep sub-micron and/or low-power technologies, the operating voltage tends towards levels ranging from 1V to 2.5V, while the interface needs to be compatible with higher voltages, such as 5V. For all these categories of applications, it is usually preferable to perform most of the signal processing at low voltage, while the resulting output rises to a higher voltage level. Solving this problem requires some special actions at three levels: technology, circuit design and layout. High Voltage Devices and Circuits in Standard CMOS Technologies addresses these topics in a clear and organized way. The theoretical background is supported by practical information and design examples. It is an invaluable reference for researchers and professionals in both the design and device communities.

Download or read book Electronic Devices and Circuits written by Cheruku Dharma Raj and published by Pearson Education India. This book was released on 2008 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electronics fundamentals And Applications written by D. Chattopadhyay and published by New Age International. This book was released on 2006 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Is Meant For The Students Pursuing A Beginners' Course In Electronics. Current Syllabi Of Basic Electronics Included In Physics (Honours) Curriculum Of Different Universities And Those Offered In Various Engineering And Technical Institutions Have Been Consulted In Preparing The Material Contained Herein.In 22 Chapters, The Book Deals With Formation Of Energy Bands In Solids; Electron Emission From Solid Surfaces; Vacuum Tubes; Properties Of Semiconductors; Pn Junction Diodes; Rectifiers; Voltage Multipliers; Clipping And Clamping Circuits; Bipolar Junction Transistors; Basic Voltage And Poweramplifiers; Feedback In Amplifiers; Regulated Power Supply; Sinusoidal Oscillators; Multivibrators; Modulation And Demodulation; Jfet And Mosfet; Ics; Op Amps; Special Semiconductor Devices, Such As Phototransistor, Scr, Triac, Diac, Ujt, Impatt Diode, Gunn Diode, Pin Diode, Igbt; Digital Circuits; Cathode Ray Oscilloscope; Radio Communication; Television; Radar And Laser.Fundamental Principles And Applications Are Discussed Herein With Explanatory Diagrams In A Clear Concise Way.Physical Aspects Are Emphasized; Mathematical Details Are Given, When Necessary. Many Of The Problems And Review Questions Included In The Book Are Taken From Recent Examination Papers. Some Objective-Type Questions Typically Set In Different Competitive Examinations Are Also Given At The End Of Each Chapter.Salient Features: * Small Geometry Effects And Effects Of Interconnects Included In Chapter 18. * A Quick Discussion On Fibre Optic Communication System In Chapter 22. * Revised And Updated To Cope With The Current Syllabii Of Some More Universities And Technical Institutions. * Chapters 6, 8, 16, 18, And 22 Have Been Changed With The Addition Of New Material. * Some More University Questions And Problems Have Been Included.

Download or read book Engineering Dielectric Liquid Applications written by Issouf Fofana, Ph.D. ing. Chairholder and published by MDPI. This book was released on 2018-12-11 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Engineering Dielectric Liquid Applications" that was published in Energies

Download or read book Japanese Journal of Engineering Abstracts written by and published by . This book was released on 1928 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Electronics written by F. Patrick McCluskey and published by CRC Press. This book was released on 1996-12-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronics that can operate at high temperatures has been identified as a critical technology for the next century. Increasingly, engineers will be called upon to design avionics, automotive, and geophysical electronic systems requiring components and packaging reliable to 200 °C and beyond. Until now, however, they have had no single resource on high temperature electronics to assist them. Such a resource is critically needed, since the design and manufacture of electronic components have now made it possible to design electronic systems that will operate reliably above the traditional temperature limit of 125 °C. However, successful system development efforts hinge on a firm understanding of the fundamentals of semiconductor physics and device processing, materials selection, package design, and thermal management, together with a knowledge of the intended application environments. High Temperature Electronics brings together this essential information and presents it for the first time in a unified way. Packaging and device engineers and technologists will find this book required reading for its coverage of the techniques and tradeoffs involved in materials selection, design, and thermal management and for its presentation of best design practices using actual fielded systems as examples. In addition, professors and students will find this book suitable for graduate-level courses because of its detailed level of explanation and its coverage of fundamental scientific concepts. Experts from the field of high temperature electronics have contributed to nine chapters covering topics ranging from semiconductor device selection to testing and final assembly.